Construction & Working Drawings - Discussion
-
I bet it is!!!!
-
@bmike said:
Another small project for a workshop.
On deck are 2 small buildings - I'm taking the entire process through SU and LO, as well as another small timber frame workshop project (similar in scope to these drawings).
Here's hoping Trimble sees the value in LayOut and ups the development of it. It is my go to tool now for taking 3d to 2d.
Hi, Beautiful detail sheets can you tell me what settings you use for your styles?
-
@utiler said:
Gee Nick, there must be something you can do about that!!! How do you transfer files to sub- consultants electronically?
This is an excellent question. Our electrical and mechanical engineers all request dxf/dwg drawings as they take our base drawings and build theirs on that.
Can you export layout in dxf/dwg? -
Yes you can export in DWG or DXF (AC12 to AC2010)
http://forums.sketchucation.com/viewtopic.php?f=12&t=47135&p -
Thanks beginner. I'm just starting to consider Layout for final working drawings, but having a proper set of dxf/dwg drawings for other consultants is a must.
Doesn't sound flawless, so I might have to take certain drawings (ie floorplans, reflected ceiling plans) from SketchUp into one of my Cad programs first on order to accomplish this. Too bad. -
Hi Dale,
@unknownuser said:
Doesn't sound flawless, so I might have to take certain drawings (ie floorplans, reflected ceiling plans) from SketchUp into one of my Cad programs first on order to accomplish this. Too bad.
Have a look this...
http://forums.sketchucation.com/viewtopic.php?f=12&t=47488 -
@dale said:
@utiler said:
Gee Nick, there must be something you can do about that!!! How do you transfer files to sub- consultants electronically?
This is an excellent question. Our electrical and mechanical engineers all request dxf/dwg drawings as they take our base drawings and build theirs on that.
Can you export layout in dxf/dwg?Yes you can and in either model or paper space. What I do for my consultants and my floor plans is create a group from slice in the section tool. This accurately isolates simply line work of a plan or section. Then export that group only as a dwg file. They then have a simple background without all the crap that they usually have to erase. So far my structural engineers and surveyors have commented on how my drawings are the easiest to deal with. Pretty funny considering I don't even open ACAD to provide them.
-
Thanks Sonder. That will tilt me over the edge to Layout.
I'm sure there will be lots of questions ahead.Dale
-
another recent project:
-
@bmike said:
another recent project:
very nice. did you do your foundation details as 2D's in layout?
-
@porch_unplugged said:
@bmike said:
another recent project:
very nice. did you do your foundation details as 2D's in layout?
the foundation details are 'typical' and were pasted in as a PDF from my engineer.
if you look at the 'Round Barn' project I modeled the foundation details in SketchUp, then detailed in LayOut. -
Thought I would jump in here. I'm pretty new to sketchup but have 30 years of acad disappointment under my belt. Right now I use Architectural Desktop for plans and schedules and creating a model from them for all my elevations and layout to present them. I wanted them to look like b/w CD's so I saved the model and changed all the textures to have no color. I would love to do everything in layout but it is hard to give up all the bim and attribute extraction. This is a real project with real clients so it was a leap of faith since I had never used sketchup for a real project before this. We have a permit and it's under construction. The clients love being able to see the model. Constructive criticisum welcome.
I know the grade is rough but I'm flying by the seat of my pants here.
Try drawing this in autocad I dare you.
-
Very impresive
-
@ccaponigro said:
Thought I would jump in here. I'm pretty new to sketchup but have 30 years of acad disappointment under my belt. Right now I use Architectural Desktop for plans and schedules and creating a model from them for all my elevations and layout to present them. I wanted them to look like b/w CD's so I saved the model and changed all the textures to have no color.
Really nice work! Thanks for posting and the information.
A trick I have used in LO to hide the terrain and create a ground line: trace along the ground line in LO, making a polygon- complete the polygon, below, to mask the terrain with fill, make a duplicate and trim this to use as a thick ground line (without fill) -
@pbacot said:
@ccaponigro said:
Thought I would jump in here. I'm pretty new to sketchup but have 30 years of acad disappointment under my belt. Right now I use Architectural Desktop for plans and schedules and creating a model from them for all my elevations and layout to present them. I wanted them to look like b/w CD's so I saved the model and changed all the textures to have no color.
Really nice work! Thanks for posting and the information.
A trick I have used in LO to hide the terrain and create a ground line: trace along the ground line in LO, making a polygon- complete the polygon, below, to mask the terrain with fill, make a duplicate and trim this to use as a thick ground line (without fill)Thanks! I like that idea and it sure wouldn't hurt to get that terrain turned off.
-
Yes, actually don't need the terrain layer to be on, but you may want something to draw the ground line to, at least at first.
-
Hi folks
The plan shown by Sonder looks fantastic! I've tried to attach the one I'm talking about.
I'm just picking up Sketchup and Layout again after a lengthy absence and I'm hoping to adopt it as my full time design package rather than Vectorworks so I have a query about the electrical layout, fans etc on the drawing- are they part of the sketchup model or drawn "on top" of the view in layout?
Apologies if this is explained in the thread somewhere and I've not noticed it.
Neil
-
I take the line SU is for the 3D modelling bit and LO is for the 2D graphics and notes. Have you looked at the scrapbook facility? That is where you would start to save time if you have an office standard.
-
@njh said:
Hi folks
The plan shown by Sonder looks fantastic! I've tried to attach the one I'm talking about.
I'm just picking up Sketchup and Layout again after a lengthy absence and I'm hoping to adopt it as my full time design package rather than Vectorworks so I have a query about the electrical layout, fans etc on the drawing- are they part of the sketchup model or drawn "on top" of the view in layout?
Apologies if this is explained in the thread somewhere and I've not noticed it.
Neil
[attachment=0:358rspb4]<!-- ia0 -->Screen grab.pdf<!-- ia0 -->[/attachment:358rspb4]
Curious to know why switch from VectorWorks (VW OR SU might be my options if my CAD expired--development ended).
The electrical layout by Sonder is done in LO. http://sketchucation.com/forums/viewtopic.php?f=12&t=15911&start=255#p392706
-
Thanks for the link to the part if the post which explained about the lighting layout!
Curious to know why switch from VectorWorks (VW OR SU might be my options if my CAD expired--development ended).
Quick answer is I hope it will be possible to increase speed and accuracy. At the moment I draw everything in 2D in Vectorworks (I'm running architect 2013) so I draw the plans, sections, elevations etc individually. This takes time and leaves me open to errors when updating a plan and not the corresponding section / elevation (or vice-versa). Vectorworks is great but I feel like I could work a bit smarter.
I know that I can model in full 3D in Vectorworks but the learning curve seems pretty steep and I understand from a couple of people who use Vectorworks and Sketchup that they find Sketchup and Layout the fastest way to draw. I'm pretty competent with Sketchup - if perhaps a bit rusty - and I'm beginning to feel my way around Layout.
I'm a sole practitioner and work mainly on domestic alterations and extensions (few new-builds here and there too) but I'm beginning to get involved in larger schemes (complete internal and external re-fit of a largely square 2000m2 office block) so I'm thinking Sketchup and Layout COULD offer me some speed and accuracy improvements for the type of work I do.
I VERY rarely need to share drawings with consultants etc so it seems worth a try?
Neil
Advertisement