[Plugin][$] FredoSpline - v2.6a - 01 Apr 24
-
@ludnid said:
...forcing an update on a user who's paid for the tool
How did you come to conclusion this individual paid for this? My reply was based
on assumption he used trials.
Now though I agree the mandatory updates for permanent license holders are questionable, but I really wish you that the need to click a button for a 10€ plugin update
once in a while will remain the biggest concern in your life 
-
@rv1974 said:
@ludnid said:
...forcing an update on a user who's paid for the tool
How did you come to conclusion this individual paid for this? My reply was based
on assumption he used trials.
Now though I agree the mandatory updates for permanent license holders are questionable, but I really wish you that the need to click a button for a 10€ plugin update once in a while will remain the biggest concern in your life Actually, I didn't. That's why I asked Fredo directly in my subsequent response. But you made a rather insensitive assertion–without fact I might add– for a legitimate concern raised by a user.
However, I imagine if it is a paid plugin, the tool will cease to work after the trial, hence no possibility for updates. Unless Fredo's pay wall system is such that it removes requirements for having to use the tool yearly without update which will be quite generous, but I haven't seen this anywhere for a paid plugin, on any software for that matter, so it doesn't make much sense.
Some of us enjoy working offline. I typically do and only update when and if I have a compelling reason to do so. That has nothing to do with the cost of the tool. So, provided it isn't a subscription based tool (which I mostly avoid anyway), I don't see why I MUST update to use a tool perpetually paid for.
-
Hi Fredo,
I will love to purchase a license for this tool and forget BezierSpline, but seeing Daniel's response does give me concern, so I have to ask:
Must this tool be constantly updated for it to work, even after purchase of a perpetual license?
-
hi?
I am using fredospine.
All three seats in my license are in use, so I can't register my license.
I want to initialize the license and register all new computers.
Can you delete my license file registration details?
my SCF User ID : zigie
Please, Help me...
-
Hi,
You have used all 3 three seats available. Release a license/s on already licensed devices to free up seats.
-
hi
I tried to use fredospline today,but this error message pops up and I can't use it. I installed the latest version.
Is there another latest version on fredospline?
-
Dear Fredo, this version was expired, please update new version ASAP.
-
Oooops...! forgot to update
New version FredoSpline v2.2a published
-
NEW RELEASE: FredoSpline v2.2a - 31 Aug 21
Requirements
- LibFredo6: v11.6a
- Sketchup version: SU2017 and above
FredoSpline 2.2a is a maintenance release for extension of validity
Home Page of FredoSpline for information and Download.
-
I have purchased a perpetual license, why does it still indicate that it has expired?
I often use it without internet and it's a pain
-
@xyhcwu said:
I have purchased a perpetual license, why does it still indicate that it has expired?
I often use it without internet and it's a painSorry for that. This is intened to make sure that user upgrade so that it makes the maintenance easier. The new version does not expire.
But if you wish, we can refund the license....
-
@fredo6 said:
@xyhcwu said:
I have purchased a perpetual license, why does it still indicate that it has expired?
I often use it without internet and it's a painSorry for that. This is intened to make sure that user upgrade so that it makes the maintenance easier. The new version does not expire.
But if you wish, we can refund the license....
Thank you for your reply, I will always support you! fredo
-
I updated to the latest version, now it wants me to relicense to which I try and get this error any ideas?. As you can see I successfully licensed it fine back in July.
-
Fredo, Polycorner tool with Seg parameter set on maximum (96s) produces only 2 segment fillets
if the corner is >/= 171 degr. Is there possibility to tweak the algorithm so the wide angle conrers would get more segments? -
@rv1974 said:
Fredo, Polycorner tool with Seg parameter set on maximum (96s) produces only 2 segment fillets
if the corner is >/= 171 degr. Is there possibility to tweak the algorithm so the wide angle conrers would get more segments?It's computed automatically for the whole curve. Did you try to select the corner and tweak its #seg360 locally (click on the small circle and a panel in green should open)?
-
>>It's computed automatically for the whole curve
Of course, I understand and thankfully use the whole curve instant processing.
I'm talking about further refinement of this global computation - 2 segments max for wide angle situation is not enough.
Is it possible (as option) to process corners with the same number of segments?
Or give an extra option for a minimum number of segments?>>Did you try to select the corner and tweak its #seg360 locally (click on the small circle and a panel in green should open
Manual tweaking won't help - 96 value is Max. And besides.. manual tweaking is not desired. -
NEW RELEASE: FredoSpline v2.3a - 01 Nov 21
Requirements
- LibFredo6: v12.2a
- Sketchup version: SU2017 and above
FredoSpline 2.3a includes a parameter to set the minimum number of segments for PolyCorner curves. This may be useful when the angle if close to 180 degree. The parameter can be set in the Default Parameters dialog. By default, it is set to 8.
Home Page of FredoSpline for information and Download.
-
Amazing, huge thank you Fredo!
-
Hi Fred,
Great plugin! I found an issue where when editing the points on a closed curve that defines a surface - sometimes the surface will break for no reason. It works as expected on most edits but regularly there are some edits that just won't work, even when a plane is selected. I haven't been able to establish a pattern of what causes the issue to happen. I found a workaround for the moment but it's time consuming - once the surface disappears after an edit, I copy the curve and paste onto a new surface. My workaround actually proves that my curve is still flat and the issue is indeed a bug. Please let me know if you'd like me to send a video of the reproduction.
J
EDIT:
Here is a link to the a reproduction of the issue: https://www.dropbox.com/s/k0ilok2zwdcay6n/Sketchup%20FredoSpline%20Bug%20Repro%20HB.mp4?dl=0
As you can see toward the end of the video, editing the points sometimes break for no apparent reason. This has been a workflow killer for me as it prevents from editing curved borders in situ.
PS: Unfortunately, I was not able to attach it here as mp4 are not allowed.
-
Fredo Spline not showing popup menu or control points
SketchUp 2017 installed on Mac OSX 10.14.6 (Mojave). FredoSpline_v2.3a, LibFredo6_v12.5b installed.
Sketchup working normally. FredoSpline toolbar loads, able to show quick launcher. When Create toolbar button pressed, no popup menu shows up; quill pointer shows up with no “+”, and clicking does not add control points
Advertisement