[Plugin][$] FredoCorner - v2.7a - 31 Mar 24

Dave R · 11 Feb 2021, 22:42

One of the things I have always wondered is whether its possible to do an unsymetrical corner?

By this, I mean longer on one axis, than another..

Your picture didn't upload.

Like this?

Yes. It's possible.

jweaver100 · 12 Feb 2021, 00:32

@dave r said:

@jweaver100 said:

One of the things I have always wondered is whether its possible to do an unsymetrical corner?

By this, I mean longer on one axis, than another..

Your picture didn't upload.

Like this?
[attachment=1:20mh5rlz]Screenshot - 2_11_2021 , 4_40_29 PM.png[/attachment:20mh5rlz]

Yes. It's possible.
[attachment=0:20mh5rlz]Screenshot - 2_11_2021 , 4_39_09 PM.png[/attachment:20mh5rlz]

Yes.. EXACTLY that.. How? I have pressed every button I can find, and its always symetrical (i.e the Offset is the same on both axis..

Dave R · 12 Feb 2021, 00:44

Start the tool and set the initial offset and then click on the green lines that need to get a different offset. Then type that offset. It'll show in the Measurements window.

Go to the first post of this thread and watch the videos.

jweaver100 · 12 Feb 2021, 00:55

@dave r said:

Start the tool and set the initial offset and then click on the green lines that need to get a different offset. Then type that offset. It'll show in the Measurements window.

Go to the first post of this thread and watch the videos.

I am such a d***.. I got to this point many times.. And when I clicked on the green line it says "Select other Offset Lines or enter a new offset in the VCB"... And I expected a popup to come up, like it does when you set the "normal" offset.

I didn't realise that you just have to type.

Makes perfect sense now.. Never even thought to try that before now...

Thanks!

kelly13 · 19 Feb 2021, 11:49

I am from Russia, I do not always understand complicated instructions in English. Explain with simple sentences: "come here, click here .." HOW TO BUY A PLUG-IN LICENSE FOR 3 COMPUTERS

I do not need a premium plan for this site "sketchucation.com"
I just want to buy a license plagin fredocorner for $ 22

please duplicate the answer to my mail: tysha1231@yandex.ru

I will translate your answers on google translator

fredo6 · 19 Feb 2021, 18:15

In the main post about Sketchucation License, there is a link to a PDF explaining the whole process (in English).

If you have been able to post here in this forum, it means you are already registered on Sketchucation (and I assume you know how to do it, so you can explain it in Russian).

For the license of FredoCorner,

1 - In Sketchup just go to menu Tools > Fredo6 Collection > FredoCorner > License...

2 - In the Licensing dialog box, click on the 'Obtain License Button'.

3 - You are redirected to Sketchucation.com to purchase the license

4 - Once done, you receive an email with the purchased license file attached. Save it on your computer in a safe place.

5 - To activate the license, go to the same licensing dialog and click on 'Validate License'

6 - Browse and select the purchased license file which was sent to you by email.

7 - This is done.

kelly13 · 20 Feb 2021, 12:25

@fredo6 said:

In the main post about Sketchucation License, there is a link to a PDF explaining the whole process (in English).

If you have been able to post here .......
......
7 - This is done.

thank you, I was able to buy and install

LEGOsketcher · 23 Feb 2021, 08:46

re: seat limit and licenses

God day, I am The LEGO companies Sketchup admin and wonder would like to include the latest Fredocorner release to our plugin collection.

The company scripts a SU package with plugins included, Sketchucation should not be part of the basic package as most users won't use the Sketchucation plugins and it adds a level of complexity. Some users might use FredoCorner, most not. (maybe 5 -15 users)

I wonder how to best approach the licensing issue as it will be hard administer individual seats / usage. Would that mean I need to install the SUcation plugin and seat license for the users that actually need Fredo corner? I'm also worried about budget for individual seats run up compared to the SU budget. They might ask me to find an alternative if the setup is too complex/time consuming.

Will there be something like a studio license so I can avoid individual seats or floating licenses?

Feel free to PM me, looking forward to hearing from you

mwkinley · 7 Mar 2021, 21:00

Loving this plugin but my trial has expired and I can't buy the license...any tips?
I have tried uninstalling , restarting , downloading again but of course it remembers the trial version had expired...all I get is this when I click on 'manage license'.

Any help greatly appreciated.

Matt

fredo6 · 7 Mar 2021, 21:04

Could you reinstall the Sketchucation Tools v4.0.0.e.

There must be something wrong in its current installation (most likely out of date).

Please advise if it does not solve the problem.

mwkinley · 9 Mar 2021, 14:46

Fixed, thankyou Fredo.
I will buy the license now!

Regards

Matt

Buckyman · 15 Mar 2021, 12:52

I am getting Ruby error when I try to round corners.

Can you review the files attached and tell me if it is possible?

The JPG shows the parameters that I need

51140_drain_cap.skp

fredo6 · 15 Mar 2021, 13:04

The errors comes from the rounding of the upper part and the large offset.

Currently FredoCorner does not round edges when one of the edge has a length smaller than the offset.

So, it works with an offset of 2'', but not beyond.

I am planning to evolve the algorithm to overcome this limitation, but this is quite complex. So, not for an immediate release...

Fredo

PS: RoundCorner does not do a better job

bsfranza · 15 Mar 2021, 13:57

hey there,

i have a problem, the fredo corner toolbar does not show up?!

in the extension manager its shown, also in sketchucatino licence manager etc, plugin manager, .. its tehre everywhere but i cant get the "toolbar" or menue items to show up?! also removing the plugina and reinstalling from rbz dos not help :I

im running the latest su 2021..

any help much appreciated,

best, bsfranz

fredo6 · 15 Mar 2021, 14:02

@bsfranza said:

i have a problem, the fredo corner toolbar does not show up?!

in the extension manager its shown, also in sketchucatino licence manager etc, plugin manager, .. its tehre everywhere but i cant get the "toolbar" or menue items to show up?! also removing the plugina and reinstalling from rbz dos not help :I

Did you install the companion library LibFredo6?

bsfranza · 15 Mar 2021, 14:20

@fredo6 said:

@bsfranza said:

i have a problem, the fredo corner toolbar does not show up?!

in the extension manager its shown, also in sketchucatino licence manager etc, plugin manager, .. its tehre everywhere but i cant get the "toolbar" or menue items to show up?! also removing the plugina and reinstalling from rbz dos not help :I

Did you install the companion library LibFredo6?

oh silly me :I .. sorry for stealing your time - i have installed the library now it works as expected...

thx

Buckyman · 15 Mar 2021, 22:28

@fredo6 said:

The errors comes from the rounding of the upper part and the large offset.
Currently FredoCorner does not round edges when one of the edge has a length smaller than the offset.
So, it works with an offset of 2'', but not beyond.
PS: RoundCorner does not do a better job

Yes I did see success with 2", and I did try RoundCorner
Thanks for your quick response and all your great plugins

NJDesign · 19 Mar 2021, 21:43

I am getting a Ruby console error when I try to round these corners. Can you tell me what is wrong?

-Never mind. I found a way around it.

skp file

NJDesign · 20 Mar 2021, 18:02

Since I purchased the license I keep getting Ruby code errors. I have not managed to use the plugin successfully. Here is an example of the errors I get:

Date: 20-Mar-21 13:51:43
An error occurred in FredoCorner
An error occured in the Ruby code

undefined method `[]' for nil:NilClass

fredocorneralgo.rbe:: 2618 -- chemin_analyze_crossing
fredocorneralgo.rbe:: 2421 -- brane_intersect_chemins
fredocorneralgo.rbe:: 2060 -- block in catena_process_branes_protected
fredocorneralgo.rbe:: 2047 -- each
fredocorneralgo.rbe:: 2047 -- catena_process_branes_protected
fredocorneralgo.rbe:: 2009 -- block in catena_process_branes
fredocorneralgo.rbe:: 2008 -- catch
fredocorneralgo.rbe:: 2008 -- catena_process_branes
fredocorneralgo.rbe:: 965 -- block in solid_construct_branes
fredocorneralgo.rbe:: 964 -- each
fredocorneralgo.rbe:: 964 -- solid_construct_branes
fredocorneralgo.rbe:: 919 -- block in solid_reconstruction
fredocorneralgo.rbe:: 918 -- each
fredocorneralgo.rbe:: 918 -- solid_reconstruction
fredocorneralgo.rbe:: 883 -- solid_add_remove_edges
fredocornertool.rbe:: 1845 -- selection_change
fredocornertool.rbe:: 1833 -- selection_add_remove_edges
fredocornertool.rbe:: 1856 -- selection_set
fredocornertool.rbe:: 1538 -- block in preselection_instantiate
fredocornertool.rbe:: 1535 -- each
fredocornertool.rbe:: 1535 -- preselection_instantiate
fredocornertool.rbe:: 1530 -- preselection_analyze
fredocornertool.rbe:: 766 -- true_activate
fredocornertool.rbe:: 751 -- block in activate
lib6plugin.rbe:: 1568 -- tem_context
fredocornertool.rbe:: 751 -- activate
fredocornertool.rbe:: 194 -- select_tool
fredocornertool.rbe:: 194 -- launch
fredocornertool.rbe:: 176 -- action__mapping
lib6plugin.rbe:: 129 -- call
lib6plugin.rbe:: 129 -- launch_action
lib6plugin.rbe:: 227 -- launch_action
bootstrap_fredocorner.rbe:: 103 -- launch_action
bootstrap_fredocorner.rbe:: 118 -- block in startup
lib6plugin.rbe:: 1347 -- command_invoke
lib6plugin.rbe:: 1328 -- block (2 levels) in build_config_commands
lib6traductor.rbe:: 1377 -- block in add_command

fredo6 · 20 Mar 2021, 18:09

@njdesign said:

Since I purchased the license I keep getting Ruby code errors. I have not managed to use the plugin successfully.

Depending on the model, FredoCorner may get into error.

So the best would be to PM me or post the model so that I have a look.

Fredo

PS: This has nothing to do with the license. The error is in the algorithm.