[PLUGIN] Flowify v1.1.0 (updated 150327)

shahrishabh126 · 2 Jun 2017, 15:15

it is showing error.please help Sir.

gnome_mo · 11 Jan 2018, 08:47

Do I need to make quad from regular sketchup triangulated model? If so, how?
I don't get any errors, just my projection plane gets divided and extruded for the width of my group, but it never gets projected on a needed surface.

Vizan · 15 Nov 2019, 18:35

Hello! How can I apply top geometry to bottom using your plugin?

pilou · 15 Nov 2019, 21:45

It's not an "Apply" it's a "Deformation"
So maybe the result can be that you want...

bhuta_n · 25 May 2020, 06:22

Hi,
I cant use flowify in sketchup 8. Is is compatibele with SK 8?

Nan Htet Htet Aye Mon · 19 Dec 2020, 04:36

Hello...
I am using the sketchup 2020 and cannot use it in mine.
Is it not support for 2020 version yet?

cotty · 20 Dec 2020, 13:12

Flowify do work in 2020...

alvis · 20 Dec 2020, 18:39

@vizan said:

Hello! How can I apply top geometry to bottom using your plugin?
[attachment=0:zcrmklbm]img_15112019_181118.jpg[/attachment:zcrmklbm]

https://sketchucation.com/forums/viewtopic.php?p=640305#p640305

Nan Htet Htet Aye Mon · 23 Dec 2020, 05:00

Hi Caul...
Thank you so much for the amazing plug in.
I want to use Flowify in Sketchup 2020.
Any update for it.
Thank you

cotty · 23 Dec 2020, 15:32

@nan htet htet aye mon said:

Hi Caul...
Thank you so much for the amazing plug in.
I want to use Flowify in Sketchup 2020.
Any update for it.
Thank you

Did you read my answer to your last question?

emygarbanzo · 3 Mar 2021, 14:20

Hi, I have tried to use flowify a lot of times and it just doesnt work, i dont know if its because of my sketchup or something else. I have folowed every step there is so I dont know what to do.

I would aprreciate so much if someone could help me.

flowify 3d.skp

cotty · 4 Mar 2021, 15:38

You need a "Group with [only] target surface" here too...

hrachid · 5 Apr 2021, 06:13

I'm facing a problem with the extension,,,,
I'm using ketchup 2018,, and when i reopen the file the extension disappears !!!!
anyone can help?
Thanks

silbedia · 25 Apr 2021, 18:51

Hi,

I'm having an issue imposing a grid on a curved 3D surface. I have the projection plane group, target surface group, and connection edge group, all in one group. When I select the entire group and do extensions > flowify > impose grid, in order to check to see if it all works right, I dont get a grid. I adjusted the target surface so that there isnt overlapping geometry (which is barely present at the bottom of the cone) but that still didn't make a difference.

My target surface group uses a radial grid and not a rectangular grid in its hidden geometry, is this the problem? When I try it using a target surface with simpler rectangular geometry it works fine.

Jamie1407 · 16 May 2021, 10:57

it doesnt appear and error so i guess now everything is ok. but when i click on flowify it doesnt do anything i keep waiting and nothing not even an error. Nothing.

thanks for your help. any help will be useful.

here is the file

pilou · 16 May 2021, 16:58

@ Jamie If you want some help post your file in V6 or Maxi 2017 Make !

nlipovac · 16 May 2021, 19:08

@jamie1407 said:

it doesnt appear and error so i guess now everything is ok. but when i click on flowify it doesnt do anything i keep waiting and nothing not even an error. Nothing.

thanks for your help. any help will be useful.

On destination mesh:
You have two group levels inside that mesh group so I exploded that one.
I removed the rim around that mesh since it is not needed to wrap that Voronoi mesh.
Run Solid inspector and removed stay edges.
Removed line group and created it again.

On Voronoi mesh I removed thickness, you can add it after you create a new one using the JointPushPull plugin.

There are some weird spikes after I run Flowify but you can move them to their position manually.

flowifyy help.skp

Jamie1407 · 17 May 2021, 06:08

@nlipovac said:

@jamie1407 said:

it doesnt appear and error so i guess now everything is ok. but when i click on flowify it doesnt do anything i keep waiting and nothing not even an error. Nothing.

thanks for your help. any help will be useful.

On destination mesh:
You have two group levels inside that mesh group so I exploded that one.
I removed the rim around that mesh since it is not needed to wrap that Voronoi mesh.
Run Solid inspector and removed stay edges.
Removed line group and created it again.

On Voronoi mesh I removed thickness, you can add it after you create a new one using the JointPushPull plugin.

There are some weird spikes after I run Flowify but you can move them to their position manually.

Omg thank so much!

junie1111 · 27 Jul 2021, 09:32

Hi there, can I ask one thing?
I tried to use plugin but I guess doesn't work when file is huge....
Clicked plugin and nothing happened. No alarm.....
Is there any method without divide geometry?
Any help will be helpful
Many thanks.

sketchup.skp

amycreech · 24 Aug 2021, 16:19

Hello!

I'm trying to use the Flowify extension to apply tufting to a curved sofa, but it looks like Flowify is only compatible with Sketchup 2019 and under. I was wondering if there is a similar extension I can use to do the same effect of bending the geometry?

Thank you in advance,
Amy