Medeek Wall Plugin

medeek

Version 1.5.7b - 07.22.2020

Updated the gable wall module to allow for zero wall height hip walls.
Fixed a bug with the trimming of Simpson Strong-Tie wood shear walls (WSW).

medeek

Off the beaten path a bit today, had a discussion about engineering and the plugins, so it got me thinking about the engineering module and beams and headers. Some ideas on representing loads on beams below:

Not sure I like how the distributed loads are represented with a transparent PNG, it might be better to simply draw two connected arrows which represent the extent of the distributed load (start and end points along the length of the beam).

The colors represent different load types (ie. Dead, Live, Snow).

The magnitude will be represented by the height of the arrows and size of the arrow heads.

The loading diagrams will be placed on their own specific layer so they can easily be toggled on an off.

Initially I think it would be best to stick with just rectangular distributed loads, trapezoidal and triangular loads complicate things considerably. Notice how the loading is placed on the beam such that coincident loads are offset in the Y axis so they can be better visualized and not Z-fight each other.

This would be a significant upgrade to the plugins, allow the user to quickly calculate and check a beam or header, similar to doing a check in Weyerhauser's Forte or any other comparable engineering application.

The output would be something similar to my Beam Calculator here:

Medeek Beam Calculator

(design.medeek.com)

However the output probably should be less verbose and more compact, similar to the one page output of Forte.

medeek

Version 1.5.7c - 07.23.2020

Fixed a bug with certain wall sheathing materials as applied to gable, hip and shed walls.

medeek

Version 1.5.8 - 08.01.2020

Fixed a bug with all wall assemblies when auto-assigment of materials is turned off in the global settings.

medeek

Version 1.5.8b - 08.02.2020

Added a semi-transparent polygon fill to the draw wall tool wireframe.
Added an option for vertical ZIP Systems 7/16" and 1/2" wall sheathing materials.

View model here:

3D Warehouse

3D Warehouse is a website of searchable, pre-made 3D models that works seamlessly with SketchUp.

(3dwarehouse.sketchup.com)

medeek

Version 1.5.9 - 08.18.2020

Added the "Basic Options" parameters to the Wall tab of the Global Settings.

I'm not sure why these parameters never got added to the global settings a long time ago but I guess better late than never.

medeek

Version 1.5.9b - 08.18.2020

Fixed a bug with gypsum when applied to the end condition for interior shed walls.

medeek

Version 1.5.9c - 08.19.2020

Fixed a floating point rounding error in the blocking and cavity insulation modules for all walls.

No bells and whistles tonight. Sometimes it's just about putting out the fires.

medeek

Version 1.6.0 - 08.23.2020

Enabled variable king stud and trimmer stud widths for garage doors (non-portal frame).

medeek

Version 1.6.0b - 08.23.2020

Added the ability to create, load and delete garage door presets within the Edit and Draw (HTML) Menus.
Fixed a bug with reading in presets from the door and window edit menus.

medeek

Version 1.6.1 - 08.26.2020

All gable wall types (gable, hip, shed) now include the option to enter in the wall slope as a pitch or angle.

medeek

For completeness I think it would be a good idea to add the option for arched garage doors and dutch corners. The algorithms for arched doors already exist within the man door module and the geometry of dutch corners is very simple. Give me a couple of days and I will knock this one out.

medeek

Version 1.6.2 - 09.01.2020

Added three additional parameters to the "User Interface" section of the General tab of the global settings. This allows the customization (colors) of the HTML menus.

medeek

View model here:

3D Warehouse

3D Warehouse is a website of searchable, pre-made 3D models that works seamlessly with SketchUp.

(3dwarehouse.sketchup.com)

medeek

Version 1.6.3 - 09.06.2020

Added (segmental) arched garage doors to the garage door module.

I still need to add the option for dutch corners.

medeek

Version 1.6.4 - 09.07.2020

Added Dutch Corners to garage doors within the garage door module.

View model here:

3D Warehouse

3D Warehouse is a website of searchable, pre-made 3D models that works seamlessly with SketchUp.

(3dwarehouse.sketchup.com)

Now the garage door module feels a little more complete.

medeek

Version 1.6.5 - 09.10.2020

Added a parameter into the global settings to allow for adjustment of the size of labels and annotations.
Added a parameter into the global settings to allow for adjustment of the font for text found within annotations and labels.