Savepanel - file formats?

thomthom

You can always check the filename you get back - if it doesn't have an extension, append it.

bomastudio

But how to detect the user choice?

TIG

Going back several posts...

It is a mistake to think that you can use the file-type filter when saving.
UI.openpanel can use it to filter what's shown to choose from - the user then picks a file and it is returned as a string including its path.
But UI.savepanel does not do the same thing - the last argument ought to be a default file name NOT a filter.
If you use a filter it does nothing.
Its returned value is the current_folder/file_name

If your code allows different file types you probably need to establish that before ever opening the savepanel dialog.
For example, in an earlier dialog.
Then use the savepanel to get the user's desired folder and file_name.
If they enter a file_type use the File & gsub methods to strip it off and add back the file_type suffix they chose earlier.
Alternatively let the user specify the file_type in the savepanel - but if there is not an expected file_type appended you can open a dialog to tell them so, and either default to one of them [e.g. .jpg] OR open a dialog and get them pick one off a dropdown list.

Another alternative is to establish the name of the file AND its file-type in an earlier dialog, and then to use UI.select_directory to allow the user to specify the folder for that file.

Or even simpler, have the user specify the file-type from a dialog's dropdown list and then use the model-name as the default file_name [no choice] AND the model's folder as the destination [no choice] - perhaps making a subfolder named Images to keep things tidy ?

You are trying to do something with a UI method that is not possible.
However, there are many alternative ways to do something like this - you are the author, you determine what happens...

bomastudio

Ok. Sometimes I insist too much in my ideas.....After all my motto is "yes you can" (but I'm realizing that "you" is referred to Dan, Thomthom and TIG, not me..)

driven

it's relatively easy to have the user supply all the export setting needed...

you could even add a 'change directory' item...
the code for that dialog pulled out of one of my plugins...
it's a little untidy because it used @vars that I removed for the example...
I haven't added the menu code as it's buried in another method...

but, I also added the ask for directory code first...

It will save an image if you test it...

        dir = ""
        until File.exists?(dir)
          if UI.respond_to?(;select_directory) # SketchUp 2015
            dir = UI.select_directory.to_s
          else
            dir = File.dirname(UI.savepanel.to_s)
          end
        end
        view = Sketchup.active_model.active_view.freeze
        vph = view.vpheight
        vpw = view.vpwidth
        height = vph
        width = vpw
        title = Sketchup.active_model.title
        # add a fallback title
        title = 'Test' if title == ""
        # Sketchup.active_model.path is empty string and mkdir raises error when
        # the model has not yet been saved. We could require the user to save, or
        # guess a default location from ENV (with the risk it also does not exist),
        # or get the prompt the user later when he actually wants to save an image.
        path  = Sketchup.active_model.path
        type = '.png'
        aa = false
        tran = false
        image = File.join(title + type)
        key = 'th'
     #   menu.add_item("Image Settings") do
          prompts =  ["Filename", "Filetype", "Width", "Height", "AA","Quality %", "Transparency", "sytle key", "Save Now"]
          defaults = [image, type, width, height, aa, 100, tran, key, 'yes']
          list =     ["", "", "", "", "true|false", "", "true|false", "", "yes|no"]
          results = UI.inputbox prompts, defaults, list, "Image Out Settings"
         
         if results != false
            # UI.inputbox gives strings. Make sure we immediately cast them into the correct types!
            image = results[0]
            type = results[1]
            width = results[2].to_i # Fixnum
            height = results[3].to_i # Fixnum
            aa = results[4] == true # Boolean
            qual = results[5].to_f/100.0
            tran = results[6] == true # Boolean
            key = results[7]
            path = File.join(dir,results[0]) 
            # your write code goes here or send to another method...
            Sketchup.active_model.active_view.write_image( { ;filename=>path, ;width=>width, ;height=>height, ;antialias=>aa, ;transparent=>tran } )
          else
            p 'canceled'
          end
#end

john

Dan Rathbun

Oh, I forgot to add that you can use Notepad++ to see how they really should act properly.

Make a junk text file, and play with the SaveAs dialog.

bomastudio

That's ok. We have to reinvent the wheel..... but let's admit that this un-natural...the user does expect that once he choose from the combolist the extension and write its own filename and choose the folder where store the file, evrything goes ok whitout any other GUI or other stuff.... AS IN ALL SOFYWARE - SketchUp too.
From my point of view this is a messy behavior of SketchUp APIs...but said that, I'll follow what you had already suggested.....

Dan Rathbun

The last thing I want to add to the discussion, is that the filetype filtering is always supposed to work to filter the list of files displayed in the dialog's file listing. (That goes for both save and open.)

The save dialog is often used to select an existing file to overwrite with confirmation. (This is why list filtering by filetype is valid.)
My personal rule of thumb is also to always add a "ALL files (.)" filter.

EDIT: The user could (whenever they wish) override the chosen filetype by manually adding a file extension.
(WAS: The user should always override the chosen filetype by manually adding a file extension.)

If no extension is typed, the chosen file type filter is supposed to be added to the filename. (Which the SketchUp API does NOT currently do.)

But the SketchUp API does not follow standard WinAPI conventions (I think because it was written originally by Mac guys.)

So, the pathstring, the filetype filter and the filename should all be separate parameters for maximum power (flexibility.) Having an either/or filename or filetype parameter takes away flexibility.

So yes, until it is fixed (if ever,) ... using it (3rd param) as a filename might be best for the Save.

This means boma would need to test the result for a "." and an extension, and if not, call a simple UI.inputbox to prompt for image type.


ftype = UI.inputbox(["choose..."],["PNG"],["JPG|PNG|BMP"],"Image Type").first

Dan Rathbun

@tig said:

The final argument for UI.savepanel is NOT a file_type list [that's UI.openpanel's, it's the default file_name.

This is NOT true. (EDIT: Well, it's not and it is. Ie, it should be possible according to Microsoft, but isn't because it has never been implemented correctly for the SketchUp API. See rest of discussion.)

UI.openpanel and UI.savepanel do the exact same thing, except the window caption and action button text is either, "Open" or "Save".
(With the added feature that if a existing file is chosen in the save dialog, a confirmation to overwrite the file will popup. Choosing "No" returns to the save dialog. A pathstring is not returned until "Yes" is chosen in the confirmation popup.)

Yes, the API documentation for UI.savepanel is way past need to correction. It has been pointed out to the API team multiple times.

Dan Rathbun

FYI: Back in Jan, Jim brought up this limitation in the OEM forum, and Thomas responded that neither panels functions are coded correctly (Jim filed a bug,) and cannot take both a filename and a typelist.
http://forums.sketchup.com/t/openpanel-and-savepanel/5489