Saint Mary Star of the Sea - 3D Virtual Model by Skp members

facer

@charly2008 said:

Hi facer,

I imported the CAD drawing, cleaned up and made faces. That should be the first step.

Charly

Good to see you are "keen to go". Before anyone goes any further please wait until I
tidy up the plan a little. Nothing too major but it will reflect the current layout.
I am now in the process of:

removing confessionals that are not in use
updating the furniture layout
adding the new glass entry wall
setting out a logical grid for reference.

When I complete the first two items above I will update the DropBox SketchUp plan
and also post to the forum.

Charly would it not be better to keep all the plans in one location as the Dropbox.
I can see the advantage of posting to the forum as it gives a "window" into the process.
I think your process is a good one as it enrolls and motivates SketchUcation members to get
involved.

I think it best in future that I first receive a copy of the plan or assembly first and
then OK it for issue. This will ensure that everyone is "singing from the same page".

Good work, thank you for your effort.

TECHDAVE02

Just too much fun!!!

HAVING TO MUCH FUN

ST MARY 2.JPG

Krisidious

I'm also not religious but find the architecture of churches very interesting and enlightening... The older the better.

facer

DROPBOX - being updated - empty at present

Please note that the DropBox is presently empty. Files and data are being re-organized
into a simpler and more rational format. This may take a few days.

Regards,
Ray

facer

Sorry, I changed the title. Try this link:

DropBox is being updated - nothing there at present

Regards,
Ray

@krisidious said:

The drop box link isn't working for me... says "nothing is here".

facer

@techdave02 said:

Just too much fun!!!

Dave,
Some of you are getting ahead the rest of us but I have to agree it is "fun" to see the building rise up. Like the great church builders of the middle ages found a good result takes time.

I have upload extensive photos of the South Elevation Gr Floor level which is my primary focus.
This is the elevation that will be the next phase of the stone restoration work.
Currently the church is raising funds for this stage and I am hoping to use the
SketchUp model to assist in this fund raising endeavor.

(note the estimate of $1500 - $2500 approx (Aust) per sq. metre for straight walling - expensive due to the detail of the work plus factors as scaffolding, hoists etc.)

FOLDER: St. Mary pics - Elevation South Gr Fl
These will be followed with the Top level photos of the windows.

I should clarify that I am receiving no commercial remuneration from this exercise.
I am not a Christian and have no direct relation with the church. My office is
5 minutes walking distance away. For the past 20 years I have "used" their church
as my private meditation hall. I pick the right times when it is almost empty and hence perfect for contemplation and I know of no other building as calm and refreshing.

They have an "enormous task" ahead of them so I thought I would give a little back.
If the SketchUp model can assist their efforts I will be satisfied.
I appreciate the assistance being offered by the SkethUcation community and I am interested to see where this "journey" will lead. I should also confess that I am a Canadian, not an Aussie.

Cheers,
Ray

facer

@facer said:

DROPBOX - being updated - empty at present

Please note that the DropBox is presently empty. Files and data are being re-organized
into a simpler and more rational format. This may take a few days.

Regards,
Ray

To all,
Dropbox is now available. There are extensive pictures internal and external:
https://www.dropbox.com/sh/cqer0p46144ksi2/FrFViA_-z6

The church had full dwg drawings including sections undertaken in the past using
photogrammetrics. As soon as the full set of drawings have been received they will be updated
to the DropBox.

Note the dwg elevation drawings are accurate and have precedence over the
drawn plan. The plan was prepared independently of the photogrammetric process by the architects.

photogrammetrics by:
http://www.cassisiarchitects.com.au/

architects:
http://paularch.com.au/contact.html

Regards,
Ray

facer

DROPBOX - updated
https://www.dropbox.com/sh/cqer0p46144ksi2/FrFViA_-z6

All dwg drawings have now been received and are available at the Dropbox.
Refer to folders:
St Mary Plans 1_Elev_dwg .......St Mary Plans 2_Elev_Sect dwg

West elevation photos have also been uploaded to the Dropbox, this completes the
full interior and external photographic overview. Photos of church details will
be taken and uploaded as the model evolves.

For more information on the Photogrammetry used on this and other projects see:

Architectural examples undertaken:
http://www.angeli3d.com/exampl-1.html

Parliament House Melbourne
http://www.angeli3d.com/parliame.html

Thank you for your continuing support on this exercise.

Regards,
Ray

TECHDAVE02

To new elements using new " photogammetry " CAD Drawings.
Key map
KEY MAP BUTTRESS No 1 No 2.JPG

East Buttress No1
BUTTRESS EAST EL NO1.JPG

East Buttress No2 BUTTRESS EAST EL No2.JPG

facer

St. Mary update 20 June 2015

The external model of St. Mary Star of the Sea has been completed
by the dedication of David Asher of Windsor Ontario, Canada.

A SketchFab "entry Section" can be viewed at:

St Mary Star of the Sea_02 - 3D model by facer0001

model by David Asher - St Mary Star of the Sea_02 - 3D model by facer0001

Sketchfab (sketchfab.com)

The materials and white lines are not what we want but at present I am
not sure of how to improve of the original SketchUp model

We are currently working on preparing "audio clips" that can be integrated into
the St. Mary 3d Virtual Model shown in SketchFab. This has been aided by the
generous donation of a Nagra-Pico by Nagra.

Nagra PICO - Nagra

Nagra (www.nagraaudio.com)

Our marketing stragegy for generating donations for the Restoration works at St. Mary Star of the Sea are:

  a. Complete a good 3d model on SketchFab that will lend itself to VR (virtual reality) cardboard viewers.

  b. Have a liminted number of "audio clips" (eg. Entry doors, Stained glass on Entry Elevation,
      and North Elevation - the renovated elevations that have street views.)

  c. Have some test "coffee chats" at Josies on Wednesday (good backroom) or in
      in the Crypt under St. Mary.  These sessions would demonstrate the use
      SketchUp on a laptop and SketchFab VR on an i-phone. 

  d. Once the "bugs" have been ironed out and delivery is "smooth" 
     we hope to get local newspaper and radio spots to discuss the project.

Thank you everyone to date for your comments and suggestions.

St. Mary - 3d model in SketchFab.JPG

facer

Sketchfab Model of

St_Mary_Star_of_the_Sea_01 "work in progress"

https://skfb.ly/QKBO

St_Mary Sketchfab model pic.jpg

facer

Progress Update at 11 Aug 2017

St. Mary Star of the Sea Sketchfab
Front Entry, a cut away model - small scale, quicker to download
LINK:

St Mary Star of the Sea_02 - 3D model by facer0001

model by David Asher - St Mary Star of the Sea_02 - 3D model by facer0001

Sketchfab (sketchfab.com)

musical track: Lord, Help Me to Tell Your Story http://www.internetevangelismday.com/music.php
Note: repeating track - sound can be turned off using music slide opened by clicking music symbol.

St. Mary Star of the Sea Sketchfab
Full model - larger file, slower to download
LINK
Note: This model is on St. Mary Star of the Sea - Sketchfab website (free plan or version)

https://skfb.ly/QKBO

(note annotations limit 5 and 1 sound track mp3 re entry door - as an example - 5 MB max allowed)
Note: sound can be turned offusing music slide opened by clicking music symbol.