[Plugin][$] Profile Builder 2

Whaat

@rv1974 said:

I wish the Author will overcome (in the near future) the biggest limitation:
only connected edges are accepted as profile path.
NB: Dudes leaf through the Help pages. This is really thermo-nuclear power plugin!

Thanks - but how would you propose that it should work to determine the path?

Whaat

@pbacot said:

I don't agree on the taxes. Taxes are never advertised in the US. They are different according to the manner of the transaction and where you are. Sales taxes are by state and local government (it can be a different amount in the next town).

I would ask where is the tax coming from? When I buy something from Colorado, I am charged California sales tax, because that's where I am. If you are in another country I don't know where the tax is generated.

I think the taxes are determined by the location of the puchaser.

I agree, these should be displayed before choosing to purchase - this is out of my control however...

rv1974

@whaat said:

@rv1974 said:

I wish the Author will overcome (in the near future) the biggest limitation:
only connected edges are accepted as profile path.
NB: Dudes leaf through the Help pages. This is really thermo-nuclear power plugin!

Thanks - but how would you propose that it should work to determine the path?

By pre-selecting the edges.
Its implemented in 3ds Max for ages:
One 'top' spline entity can incorporate numerous not connected splines.

panixia

also could be useful to have a "stepped" mode for profileson sloped path..

Whaat

@rv1974 said:

@whaat said:

@rv1974 said:

I wish the Author will overcome (in the near future) the biggest limitation:
only connected edges are accepted as profile path.
NB: Dudes leaf through the Help pages. This is really thermo-nuclear power plugin!

Thanks - but how would you propose that it should work to determine the path?

By pre-selecting the edges.
Its implemented in 3ds Max for ages:
One 'top' spline entity can incorporate numerous not connected splines.

OK, so you want to be able to select multiple polylines (not connected to each other) prior to building along path? That feature will probably come eventually...

pbacot

@whaat said:

@rv1974 said:

@whaat said:

@rv1974 said:

I wish the Author will overcome (in the near future) the biggest limitation:
only connected edges are accepted as profile path.
NB: Dudes leaf through the Help pages. This is really thermo-nuclear power plugin!

Thanks - but how would you propose that it should work to determine the path?

By pre-selecting the edges.
Its implemented in 3ds Max for ages:
One 'top' spline entity can incorporate numerous not connected splines.

OK, so you want to be able to select multiple polylines (not connected to each other) prior to building along path? That feature will probably come eventually...

How would the plugin know what edge is first and what to do between disconnected edges? And doesn't PB-1 do this, but separately apply profile to each edge?

pcmoor

Thanks Dale,

First, "Whaat" a great plugin!

However when using the PB Quantifier, the report shows the shorter measure of a cut sheet, is it possible to show the bounding box measure as a alternative or check?

cut sheet measure.JPG

rv1974

@pbacot said:

@whaat said:

@rv1974 said:

@whaat said:

@rv1974 said:

I wish the Author will overcome (in the near future) the biggest limitation:
only connected edges are accepted as profile path.
NB: Dudes leaf through the Help pages. This is really thermo-nuclear power plugin!

Thanks - but how would you propose that it should work to determine the path?

By pre-selecting the edges.
Its implemented in 3ds Max for ages:
One 'top' spline entity can incorporate numerous not connected splines.

OK, so you want to be able to select multiple polylines (not connected to each other) prior to building along path? That feature will probably come eventually...

How would the plugin know what edge is first and what to do between disconnected edges? And doesn't PB-1 do this, but separately apply profile to each edge?

$toggling sweep modifier on\off applied upon single spline.$

panixia

toggling sweep modifier on\off applied upon single spline.
you could have included a "railing" example too..

raineysky

I'm getting this error while trying to download the trial.

Sketchup Error.PNG

pbacot

Oh. Those are connected. Just multiple connected paths. I guess it could work. PB has directionality. As you know after applying to a path you can switch the direction and orientation in different ways. One way may not apply to all paths selected.

Of course we are comparing a $40 SU plugin to 3ds max.

@rv1974 said:

@pbacot said:

@whaat said:

@rv1974 said:

@whaat said:

@rv1974 said:

I wish the Author will overcome (in the near future) the biggest limitation:
only connected edges are accepted as profile path.
NB: Dudes leaf through the Help pages. This is really thermo-nuclear power plugin!

Thanks - but how would you propose that it should work to determine the path?

By pre-selecting the edges.
Its implemented in 3ds Max for ages:
One 'top' spline entity can incorporate numerous not connected splines.

OK, so you want to be able to select multiple polylines (not connected to each other) prior to building along path? That feature will probably come eventually...

How would the plugin know what edge is first and what to do between disconnected edges? And doesn't PB-1 do this, but separately apply profile to each edge?

panixia

@pbacot said:

Of course we are comparing a $40 SU plugin to 3ds max.

that's a good point
actually 3dsmax railing itself doesn't place nowere near to the flexibility of PB on many other aspect.. you should add 200€ railclone to use custom parts and fine-tune every aspect such as PB does (well actually that's way more powerful)

Whaat

@pcmoor said:

Thanks Dale,

First, "Whaat" a great plugin!

However when using the PB Quantifier, the report shows the shorter measure of a cut sheet, is it possible to show the bounding box measure as a alternative or check?

[attachment=0:39kov7e0]cut sheet measure.JPG[/attachment:39kov7e0]

Hi pcmoor,

Did you create that object with Profile Builder? If so, the length should be based on the length of the underlying path. Using the bounding box to calculate length will not work on a Profile Member composed of multiple segments.

Whaat

@raineysky said:

I'm getting this error while trying to download the trial.

Hi Raineysky,

If you (or anyone else) is getting this message, please contact the SketchUp Extension Warehouse team here:

Attention Required! | Cloudflare

(help.sketchup.com)

Please follow this link for complete instructions on installing purchased extensions:
http://help.sketchup.com/en/article/3000059

Thanks for reporting this. I am told that the EW team is working to resolve this issue.

Dale

pcmoor

@whaat said:

Hi pcmoor,

Did you create that object with Profile Builder? If so, the length should be based on the length of the underlying path. Using the bounding box to calculate length will not work on a Profile Member composed of multiple segments.

I created the object using PB2, then used the trim to surface tool, when the surface is within the length of the object, this produced a result where the PMPI is the same length as the short point of the cut. However if i place the cutting surface outside the object the "trim to face tool" extends the object and the PMPI is the same as the long point of the cut.

so this resolves my issue to create a exact overall cut length. provided I use the extend method

raineysky

Whaat,

I reported it to the link you provided.

Thank You,

Paul

juju

@juju said:

I think the point is that the price advertised should include taxes.

Paypal not supported? That's unfortunate.

Why not have it available on Smustard.com as well?

yeah well, so I caved, I bought this minutes ago, no taxes on my billing ($37.50 total).

wondering if i can resell Profilebuilder I bought years back through Smustard?

david_h

So. . .how does one upgrade from the trial to the purchase. The pullout doesn't seem to have a license or "purchase" tab. Also, I can't find "Profile Builder 2" in the Ext. WH anymore. can somebody help me on this. Also, there seemed to be some chatter on this thread about purchasing issues. Have those been resolved?

Thx,

David_H

Whaat

@david_h said:

So. . .how does one upgrade from the trial to the purchase. The pullout doesn't seem to have a license or "purchase" tab. Also, I can't find "Profile Builder 2" in the Ext. WH anymore. can somebody help me on this. Also, there seemed to be some chatter on this thread about purchasing issues. Have those been resolved?

Thx,

David_H

Hi David, first un-install the Trial, then follow these instructions:

Attention Required! | Cloudflare

(help.sketchup.com)

Whaat

@raineysky said:

I'm getting this error while trying to download the trial.

This issue should now be fixed thanks the hard-working EW team!

If you have had this error, please try installing again - it should now work.