Choosing a Graphics Card
-
@mitcorb said:
Many cards support DirectX and OpenGL, but to varying degrees, depending on the versions of each of these, and what portions of each they address.
SU uses, as allmost all common 3D modelers (besides Autodesk & Alibre modelers), OpenGL currently in old revision 1.5. Therefore no need for a video card of the CAD series, e.g. nVidia Quadro FX or AMD/ATI Fire Pro.
@mitcorb said:
You can get a real headache looking at the data regarding shaders and such.
in the context of output speed of display transformations (zoom/move/rotate etc.), the vertex throughput of the tesselation engine is most/solely important.
the nVidia Geforce series has proven, at least in the past, to provide a faster and more stable OGL support , at least under Windows, than the ATI Radeon series.
Norbert
-
@sketch3d.de said:
SU uses, as allmost all common 3D modelers (besides Autodesk & Alibre modelers), OpenGL currently in old revision 1.5. Therefore no need for a video card of the CAD series, e.g. nVidia Quadro FX or AMD/ATI Fire Pro.
IMO, if you don't need blistering game performance, and you can afford it, using a Quadro doesn't hurt either. Lately we've seen some problems with the consumer Nvidia cards (mouse trails, for example) so their drivers aren't always what they should be.
Anssi
-
I found this and I think it worth to be taken into consideration:
SketchUp's performance relies heavily the graphics card driver and it's ability to support OpenGL 1.5 or higher. Historically, people have seen problems with Intel based cards with SketchUp. We don't recommend using these graphics cards with SketchUp at this time.
-
@anssi said:
IMO, if you don't need blistering game performance...
the horsepower of the GPU can be of course used for 3D modelers too.
@anssi said:
...and you can afford it, using a Quadro doesn't hurt either.
sure but regularly doesn't show any advantage for low-/mid-end modelers at the same time being much more expensive if the same hardware level, i.e. GPU, is desired.
@anssi said:
Lately we've seen some problems with the consumer Nvidia cards (mouse trails, for example) so their drivers aren't always what they should be.
drivers are obviosuly more consumer orientated (games) but the next driver release might fix these issues already.. until then, switching off the fast feedback option should cure this annoyance.
Norbert
-
I haven't seen much here in the way of opinions of the latest system specs for use with SU [we're in the market for another computer so I thought I'd put it out there]
Specs we're looking at are:
i7-4790 3.6GHz CPU
Corsair VS 650W PSU
16GB Ram
Leadtek Quadro K620 2GB GPU [been recommended this one as they've come down in price and are built for CAD / modelling apparently]
Seagate 1TB HDD
Samsung EVO 250GB SSD
Windows 8.1 64BitBe good to hear any opinions of whether we go to 32GB Ram, Quadro cards; are they really going to be better than a Ge Force GTX 970 or 980...?
Thanks in advance fellas!
-
the workstation graphics cards are great, if your software can take advantage of it, generally this means there is a special driver for the software
if there is no special driver for the software, there will be no real benefit, in fact you could have better performance from a "gaming" graphics card using that software
I suggest visiting the workstation graphics card website and checking if there are any enhancements for the software you use, else I would l would be inclined to stick to a good "gaming" graphics card
just because it is built for CAD/CAM doesn't mean the software you use will run better/faster
-
@utiler said:
Be good to hear any opinions of whether we go to 32GB Ram, Quadro cards; are they really going to be better than a Ge Force GTX 970 or 980...?
no, especially the slow Quadro K620. Go for a GeForce GTX 750Ti (in the same price range) or better: GTX 960 -> GTX 970 -> GTX 980
16 GB work memory is more than enough for SU besides you have another memory cosuming app running as e.g. a renderer or image processor or video editing.
the 840 Evo has some speed issues with files not touched for a while, Samsung plans to fix this soon but with the 850 Pro you would be on the safe side.
Norbert
-
@juju said:
the workstation graphics cards are great, if your software can take advantage of it, generally this means there is a special driver for the software
if there is no special driver for the software, there will be no real benefit, in fact you could have better performance from a "gaming" graphics card using that software
I suggest visiting the workstation graphics card website and checking if there are any enhancements for the software you use, else I would l would be inclined to stick to a good "gaming" graphics card
just because it is built for CAD/CAM doesn't mean the software you use will run better/faster
Thanks juju, the only software we use is SketchUp. No other CAD programs at all.
So I would expect that a good gaming card would be the way to go then?
-
@sketch3d.de said:
@utiler said:
Be good to hear any opinions of whether we go to 32GB Ram, Quadro cards; are they really going to be better than a Ge Force GTX 970 or 980...?
no, especially the slow Quadro K620. Go for a GeForce GTX 750Ti (in the same price range) or better: GTX 960 -> GTX 970 -> GTX 980
16 GB work memory is more than enough for SU besides you have another memory cosuming app running as e.g. a renderer or image processor or video editing.
the 840 Evo has some speed issues with files not touched for a while, Samsung plans to fix this soon but with the 850 Pro you would be on the safe side.
Norbert
Thanks Norbert, much appreciated!
-
go for a MSI or Asus w/ a twin cooler.
Advertisement