sketchucation logo sketchucation
    • Login
    โ„น๏ธ Licensed Extensions | FredoBatch, ElevationProfile, FredoSketch, LayOps, MatSim and Pic2Shape will require license from Sept 1st More Info

    [solved!!]onMouseMove show component instance

    Scheduled Pinned Locked Moved Developers' Forum
    32 Posts 9 Posters 3.5k Views 9 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Chris FullmerC Offline
      Chris Fullmer
      last edited by

      I think I do - I need to know what edge in what group it was placed on so I can break the edge and insert new geometry. I can do all that easy enough if I do it with my own tool. But I'm scared of relying on too many observers. I've had bad luck with them already, and I know you (thom) have had many projects ruined by them.

      So I think I need my own tool. Its working ok though, I'm actually drawing lines to the viewport that represent the component I'm placing. I can attach that to the mouse easy enough, and it looks pretty cool.

      Lately you've been tan, suspicious for the winter.
      All my Plugins I've written

      1 Reply Last reply Reply Quote 0
      • Dan RathbunD Offline
        Dan Rathbun
        last edited by

        Hmmm... would have been nice if the method returned a ref to the newly placed instance (instead of the model object itself*****.) Then you might have been able to easily get the instances origin point and go from there.

        Just weird that a ref to the placed instance is the obvious preferred return for a method like this. Sometimes I just do not understand how the obvious can be so often overlooked.

        ***** The API doc is in error when it says it returns nil.

        I'm not here much anymore.

        1 Reply Last reply Reply Quote 0
        • Dan RathbunD Offline
          Dan Rathbun
          last edited by

          Ok.. you could call:
          lastdefn = defn.instances.last
          after using model.place_component( defn, false )

          Wait... weirdness, the method returns immediately, BEFORE the instance is actually placed. (It spits out a redraw time to $stdout after the instance is placed.) The move component tool does not exit with a false 2nd arg, but remains in the move tool, and the user could inadvertently move the instance again.
          It would be nice if this method took a block to be run after the instance was placed.

          I'm not here much anymore.

          1 Reply Last reply Reply Quote 0
          • thomthomT Offline
            thomthom
            last edited by

            Agree 100% with you Dan.

            Thomas Thomassen โ€” SketchUp Monkey & Coding addict
            List of my plugins and link to the CookieWare fund

            1 Reply Last reply Reply Quote 0
            • F Offline
              fatihbarut
              last edited by

              I think eventhough the title has "Solved" the last solution is missing

              Here is one of them.

              
              model = Sketchup.active_model
              ent = model.entities
              sel = model.selection
              
              defn = Sketchup.active_model.definitions
              
              def onMouseMove(flags, x, y, view)
                return nil if not @instance ### only works when instance is set
                @ip.pick(view, x, y)
                if @ip != @ip1
                  view.invalidate if( @ip.display? or @ip1.display? )
                  @ip1.copy!(@ip)
                  view.tooltip=@ip1.tooltip
                  @instance.transform!(Geom;;Transformation.new(@ip1.position))
                end
              end
              
              def onLButtonDown(flags, x, y, view)
                return nil if not @instance
                @ip1.pick(view, x, y)
                if @ip1.valid?
                  @instance.transform!(Geom;;Transformation.new(@ip1.position))
                  @instance=nil ### un-sets instance
                end
              end
              
              lastdefn = defn[0] # ! I had just one definition in my component definition list therefor defn[0] worked well for me
              model.place_component( lastdefn , false )
              
              
              1 Reply Last reply Reply Quote 0
              • J Offline
                Jim
                last edited by

                As has been discovered already in this thread, you probably want to use @instance.move!(..) rather than .transform!(..) so as not to disturb the Undo stack.

                Another idea might be to use the opengl draw commands to draw a proxy object instead of actually moving an Instance with the mouse.

                Hi

                1 Reply Last reply Reply Quote 0
                • Chris FullmerC Offline
                  Chris Fullmer
                  last edited by

                  @jim said:

                  Another idea might be to use the opengl draw commands to draw a proxy object instead of actually moving an Instance with the mouse.

                  That's what I ended up doing, which was disappointing to me, but still looks pretty cool.

                  Lately you've been tan, suspicious for the winter.
                  All my Plugins I've written

                  1 Reply Last reply Reply Quote 0
                  • K Offline
                    kaas
                    last edited by

                    I'm trying out several methods for a plugin-user to define a plane. Picking 3 points works but maybe more easy would be to use a component plane thats glues to the underlying objects.

                    Using the code from this thread I can attach a component-plane to the mouse pointer.

                    behavior = @plane_def.behavior behavior.snapto = SnapTo_Arbitrary behavior.is2d = true

                    Adding this code makes the component-plane glue to objects but only outside the ruby code as it seems. The glue works if the component is picked from the component browser OR if the component is added with model.place_component componentdefinition, repeat. Then I would have to add an observer to have the code pick it up again.

                    Is there any way around this?

                    edit: changed 'listener' to 'observer'

                    1 Reply Last reply Reply Quote 0
                    • tt_suT Offline
                      tt_su
                      last edited by

                      In addition to changing the behaviour you need to use glued_to= to specify what it should be glued to.

                      ...or maybe I didn't quite understand what you where asking for..?

                      1 Reply Last reply Reply Quote 0
                      • K Offline
                        kaas
                        last edited by

                        @tt_su said:

                        In addition to changing the behaviour you need to use glued_to= to specify what it should be glued to.

                        Hello Thomas, Thanks for your reply.

                        I want the component to glue to any face in the model, just like a normal glue-ing component would do, if inserted from the component browser.

                        Funny part is: when using the code below the instance doesn't glue. If I manually pick the component afterwards from the component browser and place it, it does glue...??

                        def activate
                        	@model = Sketchup.active_model
                        	@definitions = @model.definitions
                        	@entities = @model.entities	
                                @ip = Sketchup;;InputPoint.new
                        	@ipP = Sketchup;;InputPoint.new	
                        		
                        	size = 20
                        	pm = Geom;;PolygonMesh.new
                        	pm.add_point([-size, -size, 0]) # 1
                        	pm.add_point([-size, size, 0]) # 2
                        	pm.add_point([size, size, 0]) # 3
                        	pm.add_point([size, -size, 0]) # 4
                        	pm.add_polygon(1,3,2,4)
                        	
                        	smooth_flags = Geom;;PolygonMesh;;NO_SMOOTH_OR_HIDE
                        	mb_rundim_plane_def = @definitions.add("mb_runDimPlane");
                        	dim_plane = mb_rundim_plane_def.entities.add_faces_from_mesh(pm, smooth_flags)
                        	behavior = mb_rundim_plane_def.behavior
                        	behavior.snapto = SnapTo_Arbitrary
                        	behavior.is2d = true
                        	
                        	@instance = @entities.add_instance(mb_rundim_plane_def, ORIGIN)
                        end # def activate
                        
                        def onMouseMove(flags, x, y, view)
                          @ip.pick(view, x, y)
                          if @ip != @ipP && @instance
                            view.invalidate if( @ip.display? or @ipP.display? )
                            @ipP.copy!(@ip)
                            view.tooltip=@ipP.tooltip
                            @instance.move!(Geom;;Transformation.new(@ipP.position))
                          end
                        end
                        
                        def onLButtonDown(flags, x, y, view)
                          return nil if not @instance
                          @ipP.pick(view, x, y)
                          if @ipP.valid?
                            @instance.move!(Geom;;Transformation.new(@ipP.position))
                            @instance=nil
                          end
                        end
                        
                        1 Reply Last reply Reply Quote 0
                        • TIGT Offline
                          TIG Moderator
                          last edited by

                          You must tell SketchUp which face to glue it onto.
                          You could do that by using a ' pickhelper' which is activated 'on button up'... which finds the best face-match http://www.sketchup.com/intl/en/developer/docs/ourdoc/pickhelper#picked_face
                          And then use:
                          @instance.glued_to=some_face_that_you_specify_from_pickhelper
                          See http://www.sketchup.com/intl/en/developer/docs/ourdoc/componentinstance#glued_to=

                          TIG

                          1 Reply Last reply Reply Quote 0
                          • K Offline
                            kaas
                            last edited by

                            Hi TIG,

                            Thanks for your suggestion. I changed the code, drew a simple rectangle and pushed-pulled it. After picking it throws an error on the 'glue-line':
                            Error: #<ArgumentError: Can only glue to something in the same component>
                            Doesn't make sense to me. They should be both in the same context: Sketchup.active_model.entities. Google-ing this error results in another thread you were active in http://sketchucation.com/forums/viewtopic.php?f=180%26amp;t=54813 but no help there. Any suggestions anyone?

                            def onLButtonUp(flags, x, y, view)
                            	ph = view.pick_helper
                            	ph.do_pick(x, y)
                            	face = ph.picked_face
                            	@instance.move!(Geom;;Transformation.new(@ipP.position))
                            	view.invalidate
                            	if face
                            		@instance.glued_to=face
                            	end	
                            end
                            
                            1 Reply Last reply Reply Quote 0
                            • TIGT Offline
                              TIG Moderator
                              last edited by

                              You need to set ents=model.active_entities and add the instance to that entities context.
                              BUT if the face you pick is inside another context you cannot glue to it.
                              You can check that by using instance.parent.entities==face.parent.entities

                              Why not use the way that mimics the native component placer - http://www.sketchup.com/intl/en/developer/docs/ourdoc/model#place_component

                              You already have the gluing definition, so you can erase the placed instance/code... and there is no need to then find the face at all ?

                              TIG

                              1 Reply Last reply Reply Quote 0
                              • K Offline
                                kaas
                                last edited by

                                @tig said:

                                ..Why not use the way that mimics the native component placer - http://www.sketchup.com/intl/en/developer/docs/ourdoc/model#place_component...

                                I gave your suggestion a go. Instead of adding the component to the mouse I used @model.place_component ... and have the code pick it up again with an observer.

                                Problem I now face: the newest added instance doesn't show up if I look for it. My guess is: its returning the definition info instead.

                                I tried:

                                @entities.each {|e|
                                   puts e.to_s
                                   next unless e.is_a?(Sketchup;;ComponentInstance)
                                   puts "instance; #{e.to_s}"
                                   puts "origin; #{e.transformation.origin}"
                                }
                                
                                

                                OR

                                	
                                   instance = @definitions[instance_def_name]
                                   puts "instance; #{instance.instances[0].to_s}"
                                   puts "origin; #{instance.instances[0].transformation.origin}"
                                
                                

                                Only if I add another (and another) instance, all but the last one are found (see animated gif).

                                I must be missing something elementary... Any suggestions?


                                problem.gif

                                1 Reply Last reply Reply Quote 0
                                • TIGT Offline
                                  TIG Moderator
                                  last edited by

                                  You already have a reference to the instance called @instance - so, without re-coding [so you make a definition rather than an instance], you can get a reference to the instance's definition thus: @defn=@instance.definition, then immediately erase the instance with @instance.erase!...
                                  And then you NOW use @model.place_component(@defn) ๐Ÿ˜•

                                  TIG

                                  1 Reply Last reply Reply Quote 0
                                  • K Offline
                                    kaas
                                    last edited by

                                    @tig said:

                                    You already have a reference to the instance called @instance - so, without re-coding [so you make a definition rather than an instance], you can get a reference to the instance's definition thus: @defn=@instance.definition, then immediately erase the instance with @instance.erase!...
                                    And then you NOW use @model.place_component(@defn) ๐Ÿ˜•

                                    ...? I changed the code a bit compared what I posted a few posts above. Now, at the start of model.place_component for the first time there is no instance in the model, only a definition. So I'm not sure what I should delete here.

                                    I ask myself: is the result of Sketchup.active_model.place_componentthe same context as Sketchup.active_model.entities?

                                    1 Reply Last reply Reply Quote 0
                                    • K Offline
                                      kaas
                                      last edited by

                                      Still trying to figure it out. Tested it by putting the code directly into the Ruby Console and putting it into a rb-file.

                                      Try with a freshly started Sketchup 2014 and delete 'Sophie' (but leave her in the component definitions). First I executed in the Ruby Console:

                                      
                                      @model = Sketchup.active_model
                                      @ents = @model.entities
                                      @defs = @model.definitions
                                      inst = @defs["Sophie"]
                                      @model.place_component inst,false
                                      
                                      

                                      Place her anywhere but not on the origin 0,0,0

                                      Second run this:

                                      
                                      @ents.each {|e|
                                      next unless e.is_a?(Sketchup;;ComponentInstance)
                                      puts e.transformation.origin
                                      }
                                      
                                      

                                      You get the proper coordinates of Sophie.

                                      Now I delete all Sophies but leave her in the component definitions.
                                      I wrap the above code into a plugin. I need to add an observer so the code can pick it up again (place_component breaks the code). I load it and start it with: MB_place_instance.activate

                                      The first placed instance always returns 0,0,0 as the origin. Add another one (activate again) and it returns the origin of the first added instance etc... Looks like its returning the definition and not the placed instance.

                                      There must be some logic in it but I fail to see it...

                                      
                                      require 'sketchup.rb'
                                      module MB_place_instance
                                      
                                      	class MyDefObserver < Sketchup;;DefinitionObserver ### create an observer (place_component breaks the code and returns to SU) ###
                                      	   def onComponentInstanceAdded(definition, instance)
                                      		 puts "observer has fired; " + instance.to_s
                                      		 MB_place_instance.refire(instance) # go back to the tool
                                      	   end
                                      	end
                                      
                                      	def self.activate
                                      		@model = Sketchup.active_model
                                      		@ents = @model.entities
                                      		@defs = @model.definitions
                                      		inst = @defs["Sophie"]
                                      		@observer = MyDefObserver.new
                                      		@model.definitions[0].add_observer(@observer)
                                      		@model.place_component inst,false
                                      	end #def
                                      	
                                      	def self.refire(instance)
                                      		@defs[0].remove_observer(@observer) # delete the observer
                                      		@observer = nil # delete the observer in case previous method fails
                                      		GC.start # collect garbage
                                      		@ents.each {|e|
                                      			next unless e.is_a?(Sketchup;;ComponentInstance)
                                      			puts "looking with each; #{e.transformation.origin}"
                                      		}	
                                      		puts "directly adressing passed instance; #{instance.transformation.origin}"
                                      	end #def
                                      	
                                      end #module
                                      
                                      ### start in RubyConsole with; MB_place_instance.activate
                                      
                                      
                                      1 Reply Last reply Reply Quote 0
                                      • 1
                                      • 2
                                      • 2 / 2
                                      • First post
                                        Last post
                                      Buy SketchPlus
                                      Buy SUbD
                                      Buy WrapR
                                      Buy eBook
                                      Buy Modelur
                                      Buy Vertex Tools
                                      Buy SketchCuisine
                                      Buy FormFonts

                                      Advertisement