[Plugin] FloorGenerator ( Updated 6-Apr-2017)

Oxer · 14 May 2014, 16:01

~~There is a conflict with offset.rb required for Protude.rb, the next Patterns don't work:

Irregular Polygons
HopScotch3
I_Block
The rest of patterns work fine.~~

Another question, is it possible give support to translate the plugin?

EDIT: I found a version of offset.rb that it isn't conflict with Floor Generator.

sdmitch · 14 May 2014, 19:35

~~There is a conflict with offset.rb required for Protude.rb, the next Patterns don't work:

Irregular Polygons

HopScotch3

I_Block
The rest of patterns work fine.~~

Another question, is it possible give support to translate the plugin?

EDIT: I found a version of offset.rb that it isn't conflict with Floor Generator.

I can't see how Floor Generator could ever have a conflict with offset.rb since I use a method of my own creation to do the offsets and every pattern uses the same offset method.

I have no ability or plans to do any translations of the plugin.

Oxer · 14 May 2014, 19:48

Thanks for the reply.

tt_su · 14 May 2014, 20:57

I think offset.rb modifies core classes which breaks plugins.

Openspaces · 15 May 2014, 10:41

Thank you so very much, very useful Plugin.

sdmitch · 15 May 2014, 13:32

@tt_su said:

I think offset.rb modifies core classes which breaks plugins.

Shortly after finding and using offset.rb, it was pointed out that that could be a potential problem so I did away with the class and just used it as a method. The first versions of Floor Generator used this offset method until I tried to add the Herringbone pattern. It failed apparently because the way the faces are arranged it cause multiple edges to be reversed in the face and it couldn't handle that. So I had to create my own version.

azumayugo · 25 May 2014, 09:21

hi,

i've used your script for several times, it's nice and run well. But suddenly, the script didn't load. When I check ruby console, it show some error message like this :

@unknownuser said:

Error: #<NoMethodError: undefined method to_l' for nil:NilClass> C:/Users/Design/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/SDM_FloorGenerator_WD.rb:89:in dialog'
C:/Users/Design/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/SDM_FloorGenerator_WD.rb:63:in initialize' C:/Users/Design/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/SDM_FloorGenerator_WD.rb:33:in new'
C:/Users/Design/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/SDM_FloorGenerator_WD.rb:33:in block in <top (required)>' -e:1:in call'

What should I do to make the script run again?

Thank's before

sdmitch · 25 May 2014, 16:13

@azumayugo said:

hi,

i've used your script for several times, it's nice and run well. But suddenly, the script didn't load. When I check ruby console, it show some error message like this :

@unknownuser said:

Error: #<NoMethodError: undefined method to_l' for nil:NilClass> C:/Users/Design/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/SDM_FloorGenerator_WD.rb:89:in dialog'
C:/Users/Design/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/SDM_FloorGenerator_WD.rb:63:in initialize' C:/Users/Design/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/SDM_FloorGenerator_WD.rb:33:in new'
C:/Users/Design/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/SDM_FloorGenerator_WD.rb:33:in block in <top (required)>' -e:1:in call'

What should I do to make the script run again?

Thank's before

It is probably a problem related to the saved defaults. If the plugin runs at all, choose the reset option at the bottom of the pattern list to reset the defaults.

If that isn't possible, paste the following into the Ruby Console and press Enter.

["Brick","Tile","Wood","Tweed","Hbone","BsktWv","HpScth1","HpScth2",'HpScth3',"HpScth4","IrPoly","Hexgon","Octgon","Wedge","I_Block"].each{|o| Sketchup.write_default("FloorGenerator",o,nil)};

azumayugo · 27 May 2014, 05:06

@sdmitch said:

@azumayugo said:

hi,

i've used your script for several times, it's nice and run well. But suddenly, the script didn't load. When I check ruby console, it show some error message like this :

@unknownuser said:

Error: #<NoMethodError: undefined method to_l' for nil:NilClass> C:/Users/Design/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/SDM_FloorGenerator_WD.rb:89:in dialog'
C:/Users/Design/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/SDM_FloorGenerator_WD.rb:63:in initialize' C:/Users/Design/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/SDM_FloorGenerator_WD.rb:33:in new'
C:/Users/Design/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/SDM_FloorGenerator_WD.rb:33:in block in <top (required)>' -e:1:in call'

What should I do to make the script run again?

Thank's before

It is probably a problem related to the saved defaults. If the plugin runs at all, choose the reset option at the bottom of the pattern list to reset the defaults.

If that isn't possible, paste the following into the Ruby Console and press Enter.

["Brick","Tile","Wood","Tweed","Hbone","BsktWv","HpScth1","HpScth2",'HpScth3',"HpScth4","IrPoly","Hexgon","Octgon","Wedge","I_Block"].each{|o| Sketchup.write_default("FloorGenerator",o,nil)};

Thank's sdmitch. It work again

unsuns · 1 Jun 2014, 21:29

Hello Everyone !

First of all, thank you for the great job you did to bring us that tool.

However, I have an issue : I wanted to be able to run it through a toolbar button (which I successfully did, but when I close the FG window the button is still activated and if I try to run it again the FG window doesnt show up anymore (even if I use other tools after that).

Could you please help me to fix it ?

sdmitch · 2 Jun 2014, 00:03

@unsuns said:

Hello Everyone !

First of all, thank you for the great job you did to bring us that tool.

However, I have an issue : I wanted to be able to run it through a toolbar button (which I successfully did, but when I close the FG window the button is still activated and if I try to run it again the FG window doesnt show up anymore (even if I use other tools after that).

Could you please help me to fix it ?

Just don't "X" out of the WebDialog window, instead Right click in space or select any other tool. This will close the WebDialog window an unselect the Toolbar Icon.

jolran · 2 Jun 2014, 07:28

@unknownuser said:

Just don't "X" out of the WebDialog window, instead Right click in space or select any other tool. This will close the WebDialog window an unselect the Toolbar Icon.

Sam. I think you could try trigger some actions during the closing of the dialog with "X", using @yourdialog.set_on_close { #set closing action here }. If you are not already using it, that is.
As usual concerning webdialogs, I don't know how reliable that method is..

unsuns · 2 Jun 2014, 11:36

I tried what you said jolran but I couldn't figure it out. How should I do it ?
Here is the code:

...

[mod=:3izmkj1d]Please don't post entire blocks of code from other authors - it's bad manners...
Extracts are fine...[/mod:3izmkj1d]

sdmitch · 2 Jun 2014, 12:00

@jolran said:

@unknownuser said:

Just don't "X" out of the WebDialog window, instead Right click in space or select any other tool. This will close the WebDialog window an unselect the Toolbar Icon.

Sam. I think you could try trigger some actions during the closing of the dialog with "X", using @yourdialog.set_on_close { #set closing action here }. If you are not already using it, that is.
As usual concerning webdialogs, I don't know how reliable that method is..

I wasn't. Another one of those things that is there but not a necessity so I just ignored it. Thanks for the suggestion.

jolran · 2 Jun 2014, 12:47

@unknownuser said:

I tried what you said jolran but I couldn't figure it out. How should I do it ?

unsuns, I meant this to be tried by Sam at developer-level. I havent dug in his script, so this suggestion was a shot in the dark.

@unknownuser said:

I wasn't. Another one of those things that is there but not a necessity so I just ignored it. Thanks for the suggestion.

Hope it helps.
/Joel

unsuns · 2 Jun 2014, 13:33

Can't I do it myself ? To help improve that script

sdmitch · 2 Jun 2014, 13:49

Posted new version.

Unsuns, I would appreciate it if you would let me take care of my plugins. Thank you.

unsuns · 2 Jun 2014, 14:04

That's alright ! Thank you !

unsuns · 2 Jun 2014, 18:40

Did you test it ?
Now when I select a pattern it closes the window, so I have to reopen to adjust settings and if I select another pattern it's the same.

guanjin · 3 Jun 2014, 14:16

@sdmitch said:

Posted new version.

Unsuns, I would appreciate it if you would let me take care of my plugins. Thank you.

Each pattern, cannot directly activate command, to repeat the icon to perform。