[Plugin] FloorGenerator ( Updated 6-Apr-2017)

jonorman · 24 Apr 2014, 05:32

Brilliant, just Brilliant..

rviz · 24 Apr 2014, 05:50

Sdmitch, first off thank you for helpful tool!
Could you please polish the following things (though it was puplished as floorgenerator):

inconsistent grid origin\rotation (tried on simple cube, see pic.1)
additional option 'respect user's pattern- one tile per face, consistent gaps (pic.2).
'don't penetrate corners' option(very important for metal panel siding\glazing)
I guess, to implement p.1 and 2, the tool would have to work with multiple faces.
respect adjacent faces!
pick up file's units (I'm on cm, for instance)?
presets saving?
Thank you once again.

srx · 24 Apr 2014, 07:36

Floor generator at last! Thank you sdmich! Very useful.

l_breault · 24 Apr 2014, 11:17

Thank you very much! I can't wait to give this a go!

sdmitch · 24 Apr 2014, 14:21

@rviz said:

Sdmitch, first off thank you for helpful tool!
Could you please polish the following things (though it was puplished as floorgenerator):
Yes, I probably should have called it Pattern Generator instead.

inconsistent grid origin\rotation (tried on simple cube, see pic.1)
By design, the plugin aligns the pattern length with the longest edge of the face picked. In this case, I would undo and redo the face with 90 rotation selected.

additional option 'respect user's pattern- one tile per face, consistent gaps (pic.2).
?????????

'don't penetrate corners' option(very important for metal panel siding\glazing)
I guess, to implement p.1 and 2, the tool would have to work with multiple faces.
This is a pattern generator not a groove cutter.

respect adjacent faces!
Nothing this plugin does should ever effect an adjacent face.

pick up file's units (I'm on cm, for instance)?
It does determine the units used but switches to inches or millimeters while executing then returns model to original units when exiting.

presets saving?
All the values for each option are saved in the registry and retrieved when needed.

Thank you once again.

JQL · 25 Apr 2014, 15:17

I'm thrilled that finally this is available in Sketchup!

Unfortunatelly, it isn't available in the download link any more...

Updating?

EDIT: Yes... Updating! Can't wait to try it out!

rviz · 25 Apr 2014, 16:18

@sdmitch said:

@rviz said:

Sdmitch, first off thank you for helpful tool!
Could you please polish the following things (though it was puplished as floorgenerator):
Yes, I probably should have called it Pattern Generator instead.

I meant it's not only 'floor' but rather general building finishes modeller.
So it could be tweaked (or 'polished') for wider use.

inconsistent grid origin\rotation (tried on simple cube, see pic.1)
By design, the plugin aligns the pattern length with the longest edge of the face picked. In this case, I would undo and redo the face with 90 rotation selected.

I see. But may for vertical\ surfaces the horizontal direction set the lenth?

additional option 'respect user's pattern- one tile per face, consistent gaps (pic.2).
?????????

simply every single preselected polygon will turn into the single tile piece (multiple selection would be crucial in this case). see pic.2 in my previous reply.

'don't penetrate corners' option(very important for metal panel siding\glazing)
I guess, to implement p.1 and 2, the tool would have to work with multiple faces.
This is a pattern generator not a groove cutter.

I'd call it building finishes modeler. So in addition to bricks, tiles and parquet
It'd be sweet to get metal panels which have special treatment at the corners. Please
see:

BTW have you ever thought about 'groove cutter'? It's really missing

Many thanks for attention

unearthed · 30 Apr 2014, 12:24

Thanks sdmitch, another great tool, will speed up my decks and patios no end

Ben Ritter · 30 Apr 2014, 13:29

SDMitch, thank you for your generosity and talent.

Ben Ritter · 30 Apr 2014, 13:31

@pixero said:

I've said it before, but thanks you!

I think you forgot to say that if you place a folder called BTW_Textures in your plugin folder and choose use Apply material: Rand_Tex it will use all textures in that folder. Here are a few tests I've made:

[attachment=3:1u96rdu7]Bricks01.jpg[/attachment:1u96rdu7]
Can you spot the tiling? No, because there is none. This is with 10 small seamless brick textures used.

[attachment=2:1u96rdu7]floor03.jpg[/attachment:1u96rdu7]
This is just one single seamless texture used.

[attachment=0:1u96rdu7]tiles01.jpg[/attachment:1u96rdu7]
This is also just one texture used.

Pixero, thank you very much.

sdmitch · 30 Apr 2014, 15:11

A new update. Added two new patterns.

Oxer · 30 Apr 2014, 15:19

Thanks you very much for this useful plugin!!
It works perfectly on Mac & SU2014. One question, the Row2Row Offset for Brick is 0.5 by default when you use mm units, I changed to 50 in line 69 of the rb file.

@defaults=["Corner","0","Current","Yes","Yes","50","No","No","0","No","No","30","150","50","12","6","3"] if @@opt=="Brick"

@pixero said:

I think you forgot to say that if you place a folder called BTW_Textures in your plugin folder and choose use Apply material: Rand_Tex it will use all textures in that folder.

Thanks Pixero for the info and Textures

Another question, what units uses the Texture Size, mm, inches or pixels?

sdmitch · 30 Apr 2014, 16:11

@oxer said:

Thanks you very much for this useful plugin!!
It works perfectly on Mac & SU2014. One question, the Row2Row Offset for Brick is 0.5 by default when you use mm units, I changed to 50 in line 69 of the rb file.

@defaults=["Corner","0","Current","Yes","Yes","50","No","No","0","No","No","30","150","50","12","6","3"] if @@opt=="Brick"

Thanks for pointing that out. Originally I was using a fraction(0.5) instead of a %. Once it is corrected from within the plugin and Update is clicked, that should take care of it.

@pixero said:

I think you forgot to say that if you place a folder called BTW_Textures in your plugin folder and choose use Apply material: Rand_Tex it will use all textures in that folder.

Thanks Pixero for the info and Textures

Another question, what units uses the Texture Size, mm, inches or pixels?

What ever units you are using in the model, either mm or inches. The API says inches but mm seemed to work for me.

Oxer · 30 Apr 2014, 16:25

I use metric units in my models for that, I suppose the Texture Size it will expressed in mm, is it so?
The Options Window is a bit little on Mac, I changed the window hight to 530 so I can see all options.

@@dlg=UI::WebDialog.new("FloorGenerator", false,"BTW",300,530,10,10,true)

Oxer · 30 Apr 2014, 18:15

I have created a icon for the plugin.

Icons FloorGenerator

Krisidious · 30 Apr 2014, 19:18

Can we get something like this as a pattern?

Can you show us some patterns to build for you? let us help.

3D_Hatching_LedgeStone.skp

sdmitch · 30 Apr 2014, 20:29

@krisidious said:

Can we get something like this as a pattern?

Can you show us some patterns to build for you? let us help.

That pattern is just a bit to random I think. the closest I could get is a random length, width and thickness using the wood pattern

3D_Hatching_LedgeStone.skp

pbacot · 30 Apr 2014, 21:12

Still after the holy grail, ay Kris? lol. I am trying to figure out how to do a stone wall surface (with SU hole punch components for windows etc.) and make some sort of detail at the corners that suggests the stone profile...

That's not bad sdmitch Should keep looking at it!

Krisidious · 30 Apr 2014, 22:02

@pbacot said:

Still after the holy grail, ay Kris? lol. I am trying to figure out how to do a stone wall surface (with SU hole punch components for windows etc.) and make some sort of detail at the corners that suggests the stone profile...

That's not bad sdmitch Should keep looking at it!

lmao... And I will have it.

Krisidious · 30 Apr 2014, 22:06

That looks pretty dame good sdmitch... if I had used a better tiling texture it would look better.