sketchucation logo sketchucation
    • Login
    ℹ️ Licensed Extensions | FredoBatch, ElevationProfile, FredoSketch, LayOps, MatSim and Pic2Shape will require license from Sept 1st More Info

    [Plugin] RichSection V0.5.8 UPDATED march 2015

    Scheduled Pinned Locked Moved Plugins
    395 Posts 85 Posters 131.9k Views 85 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C Offline
      caronte01
      last edited by

      HI pgarmyn

      I watched your videos and was very impressed!!!

      I installed it from the plugin store, and upon restarting got this:

      Error: c:/users/s/appdata/roaming/sketchup/sketchup 2014/sketchup/plugins/piga_richsection/richsection.rbs:4164: invalid multibyte char (UTF-8)
      c:/users/s/appdata/roaming/sketchup/sketchup 2014/sketchup/plugins/piga_richsection/richsection.rbs:4164: syntax error, unexpected $undefined, expecting keyword_end
      s2="\é\è\à\ç"
      ^
      c:/users/s/appdata/roaming/sketchup/sketchup 2014/sketchup/plugins/piga_richsection/richsection.rbs:4164: invalid multibyte char (UTF-8)
      C:/Program Files (x86)/SketchUp/SketchUp 2014/Tools/extensions.rb:197:in eval' C:/Program Files (x86)/SketchUp/SketchUp 2014/Tools/extensions.rb:197:in require'
      C:/Program Files (x86)/SketchUp/SketchUp 2014/Tools/extensions.rb:197:in load' C:/Users/S/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/PiGa_RichSection.rb:32:in register_extension'
      C:/Users/S/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/PiGa_RichSection.rb:32:in <module:RSection>' C:/Users/S/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/PiGa_RichSection.rb:14:in module:PiGa'
      C:/Users/S/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/PiGa_RichSection.rb:13:in <top (required)>' Error Loading File PiGa_RichSection.rb Error: #<NoMethodError: undefined method l_ctrl' for PiGa::RSection:Module>
      C:/Users/S/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/PiGa_RichSection.rb:33:in <module:RSection>' C:/Users/S/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/PiGa_RichSection.rb:14:in module:PiGa'
      C:/Users/S/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/PiGa_RichSection.rb:13:in `<top (required)>'

      Running 2014, windows 8

      Thanks a lot

      1 Reply Last reply Reply Quote 0
      • TIGT Offline
        TIG Moderator
        last edited by

        The file is NOT currently offered as compatible with v2014...
        Although many scripts need no adjustment to run on any version of SketchUp 'out-of-the-box'...

        The error message looks like an incompatible file encoding.
        Ruby2.0 used by v2014 needs UTF8-without-BOM for its files' encoding.
        If any ANSI file has crept into the setup it can fail.

        I fell foul of this where some FRench language translation files were supplied to me in ANSI format.
        Everything worked fine in all SUp versions until someone tried the tool with their locale set to FR - it failed !

        Looking at the files in the current set I see that several of the files in the subfolder relating to language-translations are indeed in ANSI !!! [dam' FR 😉 ]

        It is straightforward to use Notepad++.exe to change their coding to be UTF8-without-BOM and save them.

        This might be an interim fix, but the author really ought to issue an updated set - this is not rocket-science 😒

        TIG

        1 Reply Last reply Reply Quote 0
        • P Offline
          pgarmyn
          last edited by

          😄 @TIG @Caronte01
          I'm actually working on RichSection for SU-2014....

          1 Reply Last reply Reply Quote 0
          • pilouP Offline
            pilou
            last edited by

            @TIG
            [dam' FR 😉 ]
            accents, cedilla, etc...
            Sure : and because of that some cool Program like ZBrush will never had French UI because that will say rewrite all the code!!! A tragedy for us! 😮
            A multi-languages system was not built from the start! 😕

            Frenchy Pilou
            Is beautiful that please without concept!
            My Little site :)

            1 Reply Last reply Reply Quote 0
            • P Offline
              pgarmyn
              last edited by

              RichSection has been updated for Sketchup 2014
              See first post:
              http://sketchucation.com/forums/viewtopic.php?f=323%26amp;t=55072#p499865

              1 Reply Last reply Reply Quote 0
              • C Offline
                caronte01
                last edited by

                Hi pgarmyn,

                It now works perfectly with 2014!!! I love this plugin!!! It´s exactly what i needed for my sketchup/layout workflow.

                I was playing with material by layer assignment (which works great), but wondered if there was a possibilty of implementing some kind of wildcard support for material assignment.

                For example, in my construction models I normally have a very strict layer organization, and use prefixes to separate architectural elements from structural ones, furniture, etc. I use a- for architectural elements, es- for structure, etc. Usually, structural elements are concrete in my country, with some exeptions, and I normally use different layers for slabs and columns, yet they both are concrete, and should show the same hatch pattern. Right now, I have to create two identical materials for slabs (#es-placas), and for columns (#es-columnas).What if instead of this, I could create a material called #es-*, and that material would cover everything with the es- prefix. That could decrease the amount of materials per model significantly.

                Edit, I´ll play with all the options of material assignment some more....

                But, independent of this, it is a great plugin.

                Keep it up.

                Thanks a lot!!!!

                MID-Pot-Petro04h.jpg

                1 Reply Last reply Reply Quote 0
                • KrisidiousK Offline
                  Krisidious
                  last edited by

                  "Error Loading File PiGa_RichSection.rbundefined method ~+' for nil:NilClass"

                  On Win7 SU8 and 2013

                  after changing folder permissions I got "uninitialized constant PiGa::RSection"

                  Plugin shows up in preferences/extensions but not in toolbars or plugins after installation but then SU errors on restart.

                  By: Kristoff Rand
                  Home DesignerUnique House Plans

                  1 Reply Last reply Reply Quote 0
                  • P Offline
                    pgarmyn
                    last edited by

                    @Caronte01
                    Thanks for testing on Mac. So it works on Mac

                    1 Reply Last reply Reply Quote 0
                    • P Offline
                      pgarmyn
                      last edited by

                      @Krisidious
                      Strange, it works for me with SU 8, 2013 and 2014.
                      Maybee a conflict with another plugin. Can you test by unloading other plugins?
                      If that didn't work :
                      I need more information : can you ...

                      • deactivate the plugin, restart Sketchup
                      • open the ruby console and type :
                        load 'PiGa_RichSection.rb'
                      • Copy and send me the output.
                        Thanks
                      1 Reply Last reply Reply Quote 0
                      • Bob JamesB Offline
                        Bob James
                        last edited by

                        Works fine in the 'standard' plugin location (C:\Users\Bob\AppData\Roaming\SketchUp\SketchUp 2014\SketchUp\Plugins), but does not work (gets loading errors) in additional plugin location

                        i7-4930K 3.4Ghz, 2x GTX780 6GB, 32GB DDR3-1600 ECC, OCZ Vertex 4 500GB, WD Black 3TB, 32TB NAS, 4x 27" Monitors, SpaceMouse Pro, X-keys XK-60

                        1 Reply Last reply Reply Quote 0
                        • TIGT Offline
                          TIG Moderator
                          last edited by

                          @bob james said:

                          Works fine in the 'standard' plugin location (C:\Users\Bob\AppData\Roaming\SketchUp\SketchUp 2014\SketchUp\Plugins), but does not work (gets loading errors) in additional plugin location
                          That sounds like the RBS uses Sketchup.find_support_file('Plugins') and looks for files in the main Plugins folder.
                          This has long be sorted by using File.dirname(__FILE__) to find the location of a loading RB file to link other files to it, so it loads properly from any folder.
                          This path can be set in the initial loader RB.
                          Unfortunately the main code inside the subfolder is RBS and until v2014 encrypted code couldn't use __FILE__ inside itself...
                          BUT a cross-version friendly way is to define a value [Constant or @var] in the body of the RB file's code, that carries over into the same RBS method[s] too...
                          There is no intellectual property rights to protect in setting some folder-paths.
                          A common way is to have the 'initial_loader' RB in Plugins - which sets up the Extension, and in turn loads another RB 'code_loader' in the matching subfolder sorting out folder-paths etc, and then loads the various RBS [or other RB] files it needs to complete the tool's creation... That way the 'code_loader' can access FILE etc and set 'module based variables', accessible in the companion RBS files which it about to load too...

                          TIG

                          1 Reply Last reply Reply Quote 0
                          • P Offline
                            pgarmyn
                            last edited by

                            @Bob, @TIG
                            Thanks for the information. Yes i read about the RBS - find_support_file issue.
                            Just forgot about it, since i only use 'standard' file locations.
                            I will put a note in 'known issues' and update the plugin.

                            1 Reply Last reply Reply Quote 0
                            • C Offline
                              caronte01
                              last edited by

                              @pgarmyn said:

                              @Caronte01
                              Thanks for testing on Mac. So it works on Mac

                              I don't know. I switched to windows recently.... I'll update my profile to reflect that.

                              S

                              1 Reply Last reply Reply Quote 0
                              • KrisidiousK Offline
                                Krisidious
                                last edited by

                                pgarmyn says that mine are warnings and that my plugin is being loaded twice. I used plugin store to install and used the standard plugins location. any ideas?

                                By: Kristoff Rand
                                Home DesignerUnique House Plans

                                1 Reply Last reply Reply Quote 0
                                • P Offline
                                  pgarmyn
                                  last edited by

                                  @krisidious said:

                                  pgarmyn says that mine are warnings and that my plugin is being loaded twice. I used plugin store to install and used the standard plugins location. any ideas?

                                  YES/No. Errors in your first post (above)
                                  Warnings after loading manually by the command 'load ....' (private post)

                                  Try again this :

                                  • In Menu Windows/preferences/extensions by shure to have activated the plugin
                                  • If not, do so.
                                    If still no Panel or Menu (plugin/RichSection) is visible :
                                  • Disable the plugin in Sketchucation Plugins Manager (I wrote deactivate, wich was wrong)
                                  • Open The Ruby console and type (correction .rb! and not .rb ) + return key
                                    load 'PiGa_RichSection.rb!'
                                    Copy and post the output in the Ruby console
                                    Thanks
                                  1 Reply Last reply Reply Quote 0
                                  • KrisidiousK Offline
                                    Krisidious
                                    last edited by

                                    following that route I get

                                    load 'PiGa_RichSection.rb!'
                                    true

                                    but plugin does not load.
                                    shows in extensions
                                    not in toolbar.
                                    not in plugins.

                                    restarting SU shows Ruby warning of
                                    "Error Loading File PiGa_RichSection.rbundefined method ~+' for nil:NilClass"
                                    Untitled-1.jpg

                                    SU locks and acts as though there is an dialog box open somewhere and needs prompting. but no dialog is visible. Process must be killed to restart. plugin must be removed to get SU going.

                                    I have 3 screens and perhaps the dialog is off screen somewhere. I can't find it.

                                    By: Kristoff Rand
                                    Home DesignerUnique House Plans

                                    1 Reply Last reply Reply Quote 0
                                    • C Offline
                                      caronte01
                                      last edited by

                                      Hi pgarmy

                                      A couple of questions:

                                      Is there a need to have a style created per scene? In the model I´m working on right now, I have 15 rich sections, and that creates 15 different styles. Maybe have a switch to create only two, when the first rich section is created?

                                      I know it has been asked before, but an option to only create 1 scene instead of two. I kind of understand, from reading previous posts that it is necessary, but maybe an option to only create one.

                                      There is a bug (i think). I renamed a couple of rich sections with the context menu. The layer was renamed accordingly, but only one of the two scenes was.

                                      Also, some of the cut geometry will not create a face. I checked and they are solids (report a volume). What else should I look for when this happens?

                                      Thanks

                                      Santiago

                                      Screenshot 2014-03-24 14.40.53.png

                                      1 Reply Last reply Reply Quote 0
                                      • C Offline
                                        caronte01
                                        last edited by

                                        @pgarmyn said:

                                        • 1 scene : it's already in the settings

                                        Hi Pgarmyn,

                                        Sorry to ask, but how, I looked through the entire topic and could not find it?

                                        Thanks for your time!

                                        S

                                        Edit:

                                        Thanks for clarifying. Lots of settings to play with.....

                                        1 Reply Last reply Reply Quote 0
                                        • P Offline
                                          pgarmyn
                                          last edited by

                                          @caronte01 said:

                                          ....and could not find it?...

                                          I'v put a picture of the 'RichSection Setting' panel in my previous post.
                                          Update your plugin if you don't have those settings in Menu/plugin/RichSection/settings 😉

                                          1 Reply Last reply Reply Quote 0
                                          • P Offline
                                            pgarmyn
                                            last edited by

                                            @caronte01 said:

                                            ...., some of the cut geometry will not create a face....

                                            This is the first time i see a solid not producing a section face in RichSection.
                                            It's not a matter of complexity. Even when i copy the solid group in an empty model it doesn't want to produce a horizontal cut. The solid group is part of a component. In 2 of the 3 instances it produces a section-cut.
                                            The only way to correct : redefine de geometry:
                                            -you can redraw
                                            -faster (tested on SU 2013 and SU2014: open the group (or component) containing only edges and faces (use Menu/Component edit/Hide rest of model +Hide similar); Select all edges and faces ; copy ; past in place ; close the nested groups & components >> Sketchup will redefine (simplify) all faces and edges ; update de RichSection.

                                            1 Reply Last reply Reply Quote 0
                                            • 1
                                            • 2
                                            • 7
                                            • 8
                                            • 9
                                            • 10
                                            • 11
                                            • 19
                                            • 20
                                            • 9 / 20
                                            • First post
                                              Last post
                                            Buy SketchPlus
                                            Buy SUbD
                                            Buy WrapR
                                            Buy eBook
                                            Buy Modelur
                                            Buy Vertex Tools
                                            Buy SketchCuisine
                                            Buy FormFonts

                                            Advertisement