[Plugin] Slicer5

TIG · 20 Jan 2012, 10:46

Thank been resolved, there is a problem, slice tile can not be achieved, the previous version can, thank you!
Please explain ore clearly - I don't fully understand you...
Are you getting error messages in the Ruby Console ?
What is failing ?
Is this after you have messed with a lingvo file ?
Does it work if you temporarily remove the lingvo file from the subfolder ?
Which version worked ?
Which version fails ?

guanjin · 20 Jan 2012, 10:57

@tig said:

@unknownuser said:

Thank been resolved, there is a problem, slice tile can not be achieved, the previous version can, thank you!
Please explain ore clearly - I don't fully understand you...
Are you getting error messages in the Ruby Console ?
What is failing ?
Is this after you have messed with a lingvo file ?
Does it work if you temporarily remove the lingvo file from the subfolder ?
Which version worked ?
Which version fails ?

Version 5.11, can not be achieved slice tile, without any prompting!

TIG · 20 Jan 2012, 11:30

@unknownuser said:

Version 5.11, can not be achieved slice tile, without any prompting!
Let me try to recast what you said, as I understand it...
Version 5.11, does not make slices, without any error messages...
If has a toolbar and menu items, and you have a saved SKP, with just one group selected, and you run the tool... what happens ???
Because it is working successfully for me [and many hundreds of other users] then it suggests that you have something wrong in your installation.
Please try reinstalling everything.
Ensure that there are no copies of the files that should be in the tool's subfolder inside the Plugins folder by mistake.
There should be two files in the Plugins folder
Slicer.rb deBabelizer.rb
and a subfolder named
TIG-Slicer
containing
TIG-Slicer.rb
and the 8 PNG image files for the toolbar buttons
and the 6 lingvo files...

TIG · 20 Jan 2012, 12:27

I've noticed an error with the 'Portuguese' lingvo file that was recently supplied with v5.11
It's incorrectly named 'PO' and it contained no translations anyway !
Here's the correct 'PT' version.TIG-SlicerPT-lingvo.zipExtract it from the zip.
If you want Portuguese translations, please remove the incorrect 'PO' version and add this correct 'PT' one to the tool's subfolder. If your 'locale' is not 'PT' you can always change that part of the name to suit...

guanjin · 20 Jan 2012, 18:30

@tig said:

I've noticed an error with the 'Portuguese' lingvo file that was recently supplied with v5.11
It's incorrectly named 'PO' and it contained no translations anyway !
Here's the correct 'PT' version.[attachment=0:2ob4u420]TIG-SlicerPT-lingvo.zip[/attachment:2ob4u420]Extract it from the zip.
If you want Portuguese translations, please remove the incorrect 'PO' version and add this correct 'PT' one to the tool's subfolder. If your 'locale' is not 'PT' you can always change that part of the name to suit...

I may not know the expression, films can not be razed to the ground piece, thank you

guanjin · 20 Jan 2012, 18:52

@tig said:

I've noticed an error with the 'Portuguese' lingvo file that was recently supplied with v5.11
It's incorrectly named 'PO' and it contained no translations anyway !
Here's the correct 'PT' version.[attachment=1:zqav1736]TIG-SlicerPT-lingvo.zip[/attachment:zqav1736]Extract it from the zip.
If you want Portuguese translations, please remove the incorrect 'PO' version and add this correct 'PT' one to the tool's subfolder. If your 'locale' is not 'PT' you can always change that part of the name to suit...

Translated into Chinese, it can not achieve the flattening function, the following documents attached to the Chinese language, thank you! !
[attachment=0:zqav1736]TIG-SlicerZH-CN.zip[/attachment:zqav1736]

TIG-SlicerZH-CN.zip

TIG · 20 Jan 2012, 21:08

OK.
What you are saying is that when using a Chinese lingvo file the 'Flattening' function fails.
If you change the translation for the 'Flattening' parts of the lingvo back to the original file's text, does it then work ?
If so, then it suggests that some 'characters' in your translation are not working properly.
Did you use the 'UFT-8' option when saving the Chinese lingvo file ?
The translate strings go inside " " in the code, so you can't include any " in the translation, as it breaks the way the code reads it in...
Can you try alternative 'wording' ?

guanjin · 21 Jan 2012, 07:12

@guanjin said:

@tig said:

I've noticed an error with the 'Portuguese' lingvo file that was recently supplied with v5.11
It's incorrectly named 'PO' and it contained no translations anyway !
Here's the correct 'PT' version.[attachment=1:r7efhnet]TIG-SlicerPT-lingvo.zip[/attachment:r7efhnet]Extract it from the zip.
If you want Portuguese translations, please remove the incorrect 'PO' version and add this correct 'PT' one to the tool's subfolder. If your 'locale' is not 'PT' you can always change that part of the name to suit...

Translated into Chinese, it can not achieve the flattening function, the following documents attached to the Chinese language, thank you! !
[attachment=0:r7efhnet]TIG-SlicerZH-CN.zip[/attachment:r7efhnet]

I am really stupid, I did not expect this problem, thank you!

guanjin · 21 Jan 2012, 07:14

@guanjin said:

@tig said:

I've noticed an error with the 'Portuguese' lingvo file that was recently supplied with v5.11
It's incorrectly named 'PO' and it contained no translations anyway !
Here's the correct 'PT' version.[attachment=1:165j53cw]TIG-SlicerPT-lingvo.zip[/attachment:165j53cw]Extract it from the zip.
If you want Portuguese translations, please remove the incorrect 'PO' version and add this correct 'PT' one to the tool's subfolder. If your 'locale' is not 'PT' you can always change that part of the name to suit...

Translated into Chinese, it can not achieve the flattening function, the following documents attached to the Chinese language, thank you! !
Delete the wrong file, sorry！

guanjin · 21 Jan 2012, 07:32

@tig said:

OK.
What you are saying is that when using a Chinese lingvo file the 'Flattening' function fails.
If you change the translation for the 'Flattening' parts of the lingvo back to the original file's text, does it then work ?
If so, then it suggests that some 'characters' in your translation are not working properly.
Did you use the 'UFT-8' option when saving the Chinese lingvo file ?
The translate strings go inside " " in the code, so you can't include any " in the translation, as it breaks the way the code reads it in...
Can you try alternative 'wording' ?

Thank you TIG, problem solved, thank you for your guidance! Thank you! !

guanjin · 21 Jan 2012, 08:32

Hello TIG: plug-in menu bar, the ability to fold? Thank you

TIG · 21 Jan 2012, 11:32

@guanjin said:

Hello TIG: plug-in menu bar, the ability to fold? Thank you
[attachment=0:2u7rviwa]QQ截图20120120162611.jpg[/attachment:2u7rviwa]
I assume by 'fold' you mean 'combine into a single submenu'. [Do you use Google Translate?]
To make that you'll need to recode the menu making part of the script.
Here is how to do it.
the original code [around line#669] looks like this:

  UI.menu("Plugins").add_item(cmd)
  UI.menu("Plugins").add_item(cmds)
  UI.menu("Plugins").add_item(cmda)
  UI.menu("Plugins").add_item(cmdx)

This is it recoded with an extra line to make the submenu within the 'Plugins' menu; and the other four lines adjusted to add their commands into that rather than directly into the 'Plugins' menu:

  submenu=UI.menu("Plugins").add_submenu(S5+"...")
  submenu.add_item(cmd)
  submenu.add_item(cmds)
  submenu.add_item(cmda)
  submenu.add_item(cmdx)

The 'S5' constant is the deBabelized string for 'Slicer5', used as the name for the submenu plus '...'.
If users would prefer this method I could incorporate it into a new release.
So feedback please...

guanjin · 22 Jan 2012, 03:14

@tig said:

@guanjin said:

Hello TIG: plug-in menu bar, the ability to fold? Thank you
[attachment=0:7wcsfm32]QQ截图20120120162611.jpg[/attachment:7wcsfm32]
I assume by 'fold' you mean 'combine into a single submenu'. [Do you use Google Translate?]
To make that you'll need to recode the menu making part of the script.
Here is how to do it.
the original code [around line#669] looks like this:

  UI.menu("Plugins").add_item(cmd)
>   UI.menu("Plugins").add_item(cmds)
>   UI.menu("Plugins").add_item(cmda)
>   UI.menu("Plugins").add_item(cmdx)

This is it recoded with an extra line to make the submenu within the 'Plugins' menu; and the other four lines adjusted to add their commands into that rather than directly into the 'Plugins' menu:

  submenu=UI.menu("Plugins").add_submenu(S5+"...")
>   submenu.add_item(cmd)
>   submenu.add_item(cmds)
>   submenu.add_item(cmda)
>   submenu.add_item(cmdx)

The 'S5' 'constant is the deBabelized string for 'Slicer5', used as the name for the submenu plus '...'.

If users would prefer this method I could incorporate it into a new release.
So feedback please...

This can shorten the length of plug-ins drop-down menu!

guanjin · 22 Jan 2012, 10:59

Thank you TIG

guanjin · 22 Jan 2012, 11:12

Want to smooth the edges the better!!

TIG · 22 Jan 2012, 11:21

The more facets that the sliced object has the smoother the edges of the slices...

TIG · 22 Jan 2012, 22:32

Guanjin
Could you post your Chinese lingvo file [zipped] for other fellow users to benefit from - it's only fair - the rest of the tool is freely shared...

TIG · 22 Jan 2012, 22:40

Here's v5.12 http://forums.sketchucation.com/viewtopic.php?p=374969#p374969
Extra traps added for 'non-instances' within slice-collections [e.g. when slotting after editing].
Code CONSTANTS added for optional menu-location/single-submenu.
The lingvo files are now all UFT-8 encoded, to avoid problems when copying.
Typos in the FR lingvo file corrected, the correct PT Portuguese lingvo is now included.

guanjin · 23 Jan 2012, 06:06

Yes, I posted on there?

Bertier · 23 Jan 2012, 08:37

massively awesome !