sketchucation logo sketchucation
    • Login
    πŸ›£οΈ Road Profile Builder | Generate roads, curbs and pavements easily Download

    ATI device driver failure splats

    scheduled pinned locked moved SketchUp Discussions
    sketchup
    15 Posts 5 Posters 1.5k Views 5 Watching
    loading-more-posts
    • oldest-to-newest
    • newest-to-oldest
    • most-votes
    reply
    • reply-as-topic
    guest-login-reply
    deleted-message
    • brookefoxB Offline
      brookefox
      last edited by

      Thanks, guys. I say the driver fails because that is the message posted, presumably by the OS. The screen may or may not have flickered once or twice or more; if it flickers off four or five times, Windows may shut down with a notice that the driver is at fault. If it recovers, and says so, it is usually just SU that splats. So I assume it is not the card itself, Anssi.

      I'll go back to the Dell forums and make some inquiries. Thanks again.

      ~ Brooke

      one-reply-to-this-post last-reply-time reply quote 0
      • thomthomT Offline
        thomthom
        last edited by

        Sounds like a driver failure then. Vista and Windows7 will try to recover from driver failure, but 3D applications running while the failure happens will most likely crash.

        But it's worth checking what Anissi said, ensure there aren't buildups of dust. Could be overheating due to dust and increased load while using 3D app like SU.

        Thomas Thomassen β€” SketchUp Monkey & Coding addict
        List of my plugins and link to the CookieWare fund

        one-reply-to-this-post last-reply-time reply quote 0
        • sketch3d.deS Offline
          sketch3d.de
          last edited by

          @brookefox said:

          If it recovers, and says so, it is usually just SU that splats. So I assume it is not the card itself...

          which also appears to be not very likely for an approx. 1 year old video card.

          Actually it's a known glitch of the OpenGL support of the Radeon driver f. Windows which is in general optimized for consumer purposes, i.e. speed in games but not for stability with OGL based CAx applications as e.g. SU.

          If installing the latest ATI driver doesn't help, you may want check the quality moded Omega driver too... or swap to a nVidia GeForce resp. Quadro FX.

          hth,
          Norbert

          one-reply-to-this-post last-reply-time reply quote 0
          • brookefoxB Offline
            brookefox
            last edited by

            Thank you, T and N.
            What follows is mere whine.... Dell forums have had indigestion all day after being out for a week for servicing, but once when I got my foot in the door at the company (not forum) site, the lame Dell driver update system advised after I again registered, etc. ---> "service tag not supported"; no further advice. AMD variously advises that 10.2 or 10.3 is the current driver for V64 and my board. Windows tells me the driver (ver 8.533, some two years old) is up to date (device manager)!!!

            ~ Brooke

            one-reply-to-this-post last-reply-time reply quote 0
            • thomthomT Offline
              thomthom
              last edited by

              You need to use Dell drivers? Can you not use drivers directly from ATI?

              Thomas Thomassen β€” SketchUp Monkey & Coding addict
              List of my plugins and link to the CookieWare fund

              one-reply-to-this-post last-reply-time reply quote 0
              • AnssiA Offline
                Anssi
                last edited by

                I would say that whenever you can, use drivers from the graphics card chipset manufacturer. Computer manufacturers usually lose interest in their products almost as soon as they get them out of the door. Chipmakers seem to provide a longer span of support. The worst thing is that usually laptop graphics card support is limited to what the computer maker wants to offer. For instance, Nvidia supplies up to date drivers for quite old desktop graphics cards, but latest driver for my the GeForce Go card in my ols Acer luggable is from 2004. Only XP. If I ever can afford a good laptop again, I will choose one with a "high-end" graphics solution that is supported by the chip maker.

                Anssi

                securi adversus homines, securi adversus deos rem difficillimam adsecuti sunt, ut illis ne voto quidem opus esset

                one-reply-to-this-post last-reply-time reply quote 0
                • honoluludesktopH Offline
                  honoluludesktop
                  last edited by

                  Brooke, It is my experience that Dell's system will not always update their drivers. When you use a manufacturers driver, be sure that you know how to reinstall the Dell driver, "just in case" it causes something else to fail (my guess however, unlikely that is).

                  one-reply-to-this-post last-reply-time reply quote 0
                  • thomthomT Offline
                    thomthom
                    last edited by

                    @anssi said:

                    I would say that whenever you can, use drivers from the graphics card chipset manufacturer. Computer manufacturers usually lose interest in their products almost as soon as they get them out of the door. Chipmakers seem to provide a longer span of support. The worst thing is that usually laptop graphics card support is limited to what the computer maker wants to offer. For instance, Nvidia supplies up to date drivers for quite old desktop graphics cards, but latest driver for my the GeForce Go card in my ols Acer luggable is from 2004. Only XP. If I ever can afford a good laptop again, I will choose one with a "high-end" graphics solution that is supported by the chip maker.

                    Anssi

                    Ditto!

                    Thomas Thomassen β€” SketchUp Monkey & Coding addict
                    List of my plugins and link to the CookieWare fund

                    one-reply-to-this-post last-reply-time reply quote 0
                    • brookefoxB Offline
                      brookefox
                      last edited by

                      Thanks very much, all. Sometimes the Dell driver manager may provide some utility, maybe, esp. if the driver has been integrated with their hardware (?). As to the best way to handle the update, that is why I want to check the forums: it is populated with folks with this exact machine who have already jumped through this same hoop. I mentioned those various ways of updating the driver additionally because they were giving conflicting info, even ATI (AMD) themselves as to whether ver. 10.2 or 10.3 is THE ONE. (Yes, Anssi, AMD mentions bestowing on this card the heralded legacy status.)

                      ~ Brooke

                      one-reply-to-this-post last-reply-time reply quote 0
                      • sketch3d.deS Offline
                        sketch3d.de
                        last edited by

                        @brookefox said:

                        I mentioned those various ways of updating the driver additionally because they were giving conflicting info, even ATI (AMD) themselves as to whether ver. 10.2 or 10.3 is THE ONE.

                        according to the ATI driver site referenced above if using Windows XP/Vista/7 x32/x64 the recent driver version is 10.3, nothing else.

                        if you are using a desktop system with a dedicated video card and not a notebook, you can and should use the latest driver of the manufacturer of your video card (see above).

                        uninstalling the currently installed driver (see Windows control panel > software) preferrably with administrative rights and followed by an restart of Windows will avoid problems which otherwise might arise with restricted user accounts.

                        btw, which operating system do you use?

                        hth,
                        Norbert

                        one-reply-to-this-post last-reply-time reply quote 0
                        • sketch3d.deS Offline
                          sketch3d.de
                          last edited by

                          @anssi said:

                          If I ever can afford a good laptop again, I will choose one with a "high-end" graphics solution that is supported by the chip maker.

                          = Dell Precision M notebook w/ Quadro FX GPU.

                          Norbert

                          one-reply-to-this-post last-reply-time reply quote 0
                          • brookefoxB Offline
                            brookefox
                            last edited by

                            I updated the driver a few days ago and all is well since then (though the splats had been periodic before, so fingers will remain crossed).

                            On a related issue, it appears the hardware thread fruit is withering on the vine, which is too bad for folks looking for some good input on gearing up to use SU.

                            ~ Brooke

                            one-reply-to-this-post last-reply-time reply quote 0
                            • 1 / 1
                            • first-post
                              last-post
                            Buy SketchPlus
                            Buy SUbD
                            Buy WrapR
                            Buy eBook
                            Buy Modelur
                            Buy Vertex Tools
                            Buy SketchCuisine
                            Buy FormFonts

                            Advertisement