Move groups with different measures?

TIG

à Tig Some cryptic but I will see that
Joint an image for no ambiguities
So here the increment is 300 cm

My method adds '100mm' to each group's Z and moves then to suit: the other way with 'z+=100.mm' increments z by 100mm each step through the loop so then the groups get progressively further apart !

If you want to move all groups a certain amount use my way, if [for some unfathomable reason] you want to do a pseudo-grow then increment the offset each time...

My method finds each group's transformation [as an array], changes just its Z value and then resets it: the other way invents a new transformation and applies it to the group...

TIG

@unknownuser said:

Just to find now apply that just only for a selection!


def movegallgroupsup100mm()
    model = Sketchup.active_model
    entities = model.active_entities
    selection = model.selection
    ###groups = [];entities.each{|entity|groups.push(entity) if entity.kind_of?(Sketchup;;Group)}###
    groups=[];selection.each{|entity|groups.push(entity) if entity.kind_of?(Sketchup;;Group)}
    groups.each{|group|
      transformation_as_array = group.transformation.to_a
      # Z value is at position 14 ###...
      transformation_as_array[14] = transformation_as_array[14] + 100.mm
      ### or whatever increment is desired
      ### they each move up by 100mm from where they are currently...
      group.transformation = transformation_as_array
    }
end#def

Note that I've keep making the array of groups separate from the loop though the selection - changing them - since this way allows you to do other things to that array later if desired... e.g. groups[0].material="Red"###colours the first group red !
PS: The test definition 'movegallgroupsup100mm' is optional !!!
To test your code I suggest you type this in the Ruby-Console [assuming the file is called "tester.rb"]
load"tester.rb";movegallgroupsup100mm
this will load and run the script... if it's not doing what you expect then change the script and copy+paste the line back into the console and it will load/run repeat... etc etc

thomthom


model = Sketchup.active_model
entities = model.entities
selection = model.selection
groups = []
z=0

selection.each do |e| # update!
  # Skip all entities that aren't groups
  next unless e.is_a? Sketchup;;Group
  # Now we process the groups
  z += 100 # self increments can be written shorter like this
  point = Geom;;Point3d.new 0,0,z
  t = Geom;;Transformation.new point
  # Apply the transformation
  e.transform!(t)
end

pilou

@Tig
I have the "Web console" so no problem for copy/ past and launch it
Seems your plug move all selection of groups, but not each by each
Result stay grouped without interval

What is precisely this "14" value?
( i have just 5 group and one component (Bryce) for the moment and just 3 selected for the test
Why not take the first value of the array?

The ThomThom method works except that woks for the 5 groups and not only for the selection

thomthom

SU always uses inches internally.

If you want 100mm type 100.mm . See http://code.google.com/intl/nb/apis/sketchup/docs/ourdoc/numeric.html for more units.

pilou


model = Sketchup.active_model
entities = model.entities
selection = model.selection
groups = []
z=0

selection.each do |e| # update!
  # Skip all entities that aren't groups
  next unless e.is_a? Sketchup;;Group
  # Now we process the groups
     point = Geom;;Point3d.new 0,0,z
  t = Geom;;Transformation.new point
  # Apply the transformation
  e.transform!(t)
  z = z*2 + 100
end

Perfect (I put the z=z*2+100 at the end for have the first group of selection with no move)
Last thing I obtain 254 cm ( I suppose that is a conversion between inch/cm ?)
My first volume is at level z = 0 and I work in cm

TIG

Pilou

Do you want to move each of the selected groups by the same amount (my code - e.g. 100.mm) or by an ever changing amount ?

If you want it to change then you need to define how, and add this into the loop - e.g. z=1..... then loop... z += 2*z
exponential type increase !

If you are applying different offsets, and you have made the groups in order, then the increments will apply in that way; but it would be possible to 'stack' groups made at different times and the loop would process then in their made order, but not the 'stacked' order you want ! Perhaps you need to add in another test... for each of the group.bounds.min.z. which sorts them by their relative heights, so at least the groups array would be in the height order you expect...

pilou

@unknownuser said:

If you want 100mm type 100.mm

Yes! Works like a charm!
For my first one that was not like a true romance but with your help, ThomThom, Tig (yet a lot of cryptic for me , and the Chris tutorial and a dash of milk of Tod Burch
Many thx for the helps

Next will maybe an "explode view" of several groups
Just need to know position of a group

PS @ Tig Sorry but I had no chance with yours! (see previous page)
And yes I want any sort of increments so now I can have any sort of it! Thx!
Just play with parameters
I keep your group.bounds.min.z. trick in my mind!

eclaté.jpg

TIG

for a completely random offset try


selection.each do |e|
    next unless e.is_a? Sketchup;;Group
    ###point = Geom;;Point3d.new 0,0,(1000.mm * rand)
    ### offset in Z somewhere between 0m and 1m - 'rand' makes a random number 0><1
    point = Geom;;Point3d.new (1000.mm * rand),(1000.mm * rand),(1000.mm * rand)
    ### offset in all XYZ axes by 0 to 1m
    t = Geom;;Transformation.new point
    e.transform!(t)
end

Swap the ### between the different points = to see the effect

thomthom

The entities are not returned in their order in z height. You would need to sort the objects by their Z position before applying the transformations.

pilou

Before testing your new randomizer plug

I have a little problem
I have used "Grow" by Tig for make the "volume" on the left (50 groups), then my "Plug" Thomthomised
with a normal interval of course!
Seems there is something wrong somewhere
Groups are not recorded following the "grow" generation?

pilou

So i must use the Tig Advertissement more soon than I have expected

pilou

This group.bounds.min.z. can be found somewhere or the sorting of Groups must be forged again?
(nothing about sort, sorting in the API helping)

thomthom

Build a hash with the entities as the key and their Z posiiton as value and then sort the hash by the values.

pilou

Each groups has not a "time creation" trace board? So no need to remake a sorting ?
Seems I have re-open a new nightmare door

Chris Fullmer

Awesome Pilou! Keep it up, its looking great. You've got lots of good help around here.

Chris

TIG

Try something like...


zeds=[]
index=0
groups.each{|group|
   zeds.push(group.bounds.min.z, index)
   index+=1
}
zeds.sort!
sorted_groups=[]
zeds.each{|z|sorted_groups.push(groups[z[1]]) }
### sorted_groups is now groups sorted by Z

pilou

Does the group.bounds.min.z only valuable in SU 7?
Edit seems not

little try but seems I miss something (any doubt selection but the sorted_groups gives nothing on the screen)

model = Sketchup.active_model
entities = model.entities
selection = model.selection
groups = []
z=0
zeds=[]
index=0
groups.each{|group|
   zeds.push(group.bounds.min.z, index)
   index+=1
}
zeds.sort!
sorted_groups=[]
zeds.each{|z|sorted_groups.push(groups[z[1]]) }
### sorted_groups is now groups sorted by Z

sorted_groups.each do |e| 
  point = Geom;;Point3d.new 0,0,z
  t = Geom;;Transformation.new point
  e.transform!(t)  
  z =  z + 1000.mm
end

pilou

it's like a snowball on the top of the mountain

TIG

groups = [] then nothing set !!!
You emptied the groups array...
You need to fill it from the selection...

groups=[];selection.each{|entity|groups.push(entity) if entity.kind_of?(Sketchup;;Group)}