Green Toaster's Car Sketches
-
@unknownuser said:
i don t know what to say,to me isn t so hard here is my first concept car
WOW!Did you do both of those using only SketchUp? Do you have any suggestions - a description of your workflow, perhaps?
Amazing cars - thanks for posting.
-
. . . I'm taking a hiatus from this thread. After seeing ely862me's cars & others, I realize I'm stuck and I'm not making any significant progress - I'm not getting where I eventually want to be.
Of course, I'm certainly not giving up - I'm going to figure out how to create the really cool stuff - just takes some folks longer than others, I guess.
We all need a good kick in the pants every once in a while - I got mine. Ouch!
-
Hey GT! Did you end up buying the book "How to Draw Cars Like a Pro"? It was a MonsterZero recommendation, so I went out and bought it!
IT'S AWESOME! Get it! I think it will give you some really good inspiration!
Model well!!
Cheers,
- CraigD -
people i told u for me (and i don t know why but i like it) is verry simple (almost),all concepts that i have are mine(except the concept e002 wich is a modified bugatti veyron) and is no import and are build up in sketchup i can t make a tutorial because i make them in different and manny ways depends from what i start
-
@unknownuser said:
Hey GT! Did you end up buying the book "How to Draw Cars Like a Pro"? It was a MonsterZero recommendation, so I went out and bought it!
Yes! I got it from Amazon and yes, I like the book, it's very good - inspirational.@unknownuser said:
You can't just stop now...?
Ha! I'll post again - I just want to have something new - something fresh & different to offer. I'm a bit frustrated getting to the next level - for me, with my limited skills and "dang-near-zero" creativity, it's quite challenging getting there.This journey began a few days ago as I started poking around the menus and there are several tools I've never used - perhaps that's obvious from my cars. I also realize - as others have mentioned - there are other s/w programs out there that are probably better suited for drawing amorphic shapes like body parts for cars. I'd still like to find out how far I can go with SU - looks like there will be lots of enjoyment as I continue.
@unknownuser said:
most important is to watch the wireframes to see how are done
for having good proportions u can use temporary the position of the weels of a desired form of car
This is great advice - thanks, I'll investigate this more and try it - I'm sure this will be useful - will help me figure this stuff out. -
Well - here's one point where I'm "stuck". The attached file contains a wireframe for a body part - like a hood, for example. I have no clue how to turn this into a nice, good looking surface. When I use the From Contours tool the surface ends up with weird, pointed areas that I don't understand. I'm sure someone could take this handful of curves and turn it into something "beautiful" - but how?
Thanks a whole bunch,
GT
-
. . . here's almost an exact same wireframe model with a surface added using Concepts Unlimited . . . I have no idea how to do this with SU. :clueless:
-
Thanks for the suggestion - I tried it but it's substantially different from the original wireframe model and the model I did using another program which has a flat surface on top with variable radius tangent arcs or conics bordering a perimeter of different sized ellipses.
I can keep working with it - I'm not used to modeling this way - with these tools. This is not a complaint, but just an observation that it looks like I'm going to have to (1) learn what SU can do, then (2) model what I want rather than modeling with a limited understanding of how to get the job done.
-
A quick tip GT, that you probably already know... but when you select the Circle tool, you can type in the VCB (Value Control Box) and hit Enter, to add a higher number of edges that make up the circumference of the circle. This will give you a smoother curve to work with in your geometry.
Cheers,
- CraigD -
Thanks Craig - when I begin some serious modeling I'll work with changing that value. I've tried it before and it works great - like when I intersected two stretched spheres and removed material - higher number = smoother edges at trim line = higher regeneration time.
BTW - I used to ride SV-650, CBR900RR, GSF-400, Ducati 900SS, plus 38 others. After my last two crashes I gave it up completely. I'll always want another bike. (snif)
Brad
-
@unknownuser said:
depending how much wire u want to use u can make different qualityes, here a use medium quality
So, did you use the Sandbox --> From Contours tool, or what? I don't remember seeing a means of adjusting the quality - is this done before the surface is created - when the arcs were created?Sorry to be so clueless - thanks for the help.
-
i didn t use the sandbox i use the hand
i alway do this i fit them with hand the sanbox isn t precise
i said medium quality because i wasn t use too many lines how do u expect to sandbox made a nice hood i use sandbox only for two lines two arches or something like that(i was using sandbox for the windows of my concept cars) -
depending how much wire u want to use u can make different qualityes, here i use medium quality
![bw_hood_wireframe_01[5].jpg](/uploads/imported_attachments/IarL_bw_hood_wireframe_015.jpg)
-
Sorry, but I still don't understand how you get your surfaces in there and they render so smooth - looks like you converted the one I started with - I feel like I'm the dragon inside the shell - almost strong enough to break out of the egg and fly.
-
i didn t coverted i make it again,for makeing a desired surface u must have enough wire to fill exactly that form what u wish to do so u make a bigger arch on the bottom then one smaller then another smaller then another smaller when u gonna fit the wires is gonna be a nice rounded form smoth it and is gonna be exactly how u want to be
-
Okay - thank you, I'll try it - I think I (finally) understand how you did it.
I'll post my experiment on Friday.
Thanks again,
Brad
-
here is a little part from my new concept car, as i was talking u must make the wires after that fit them of cource u must have in mind the desifn of the car else u can t do a car, right? the position of the weels is taken from another concept of mine and i modified a litlle the lenght
-
Using Bruce's method (a bit higher poly) and playing with This Script I generated these.
-
%(#000080)[Thanks all! I was able to figure out what I call "bubble shaping" where the sphere is squished, cut, & so forth (see my "bubble" car on or near the first page of this thread) but thanks very much modelhead for sharing that with everyone - a great techinque.
--||-- --||-- --||-- --||-- --||--
ely862me, that's really nice you posted those images and included some explanation. I've never modeled anything before using that technique although today I tried without much success.
@unknownuser said:
There is no doubt that stiching a model together is most accurate but not many of us have that kind of time luxury.
Yes, this looks like a time consuming approach - I'm used to other tools, but I'm not an expert with the cool looking stuff: surfaces! I've been using Pro/E for years and my surfacing capabilities aren't well developed. I'm looking forward to getting this technique down.@unknownuser said:
u must make the wires after that fit them of cource u must have in mind the desifn of the car else u can t do a car, right?
I'm not very confident I can figure out how to "see" the model first - your words are very true and I believe some people have a natural ability to do this sort of thing where some do not. I clearly am in the latter category. I can "chop & chisel" flat surfaces all day - easy - but creating those beautiful smooth amorphic surfaces - wow, very impressive. Your images and words are very helpful & encouraging. I'm going to try again with something simple later tonight.--||-- --||-- --||-- --||-- --||--
Boofredlay, that's a very nice script but I'm not sure how I could use it yet - thanks for posting it and showing the very nice examples.
Happy Sketching,
Brad]
-
Brad, the script is excellent for creating a thickness of an odd shape. Look at the solid one of the two shapes. This could prove very useful in making many car components FWIW.
Cheers.
Advertisement