Medeek Floor

medeek

Version 0.9.9q - 11.10.2024

Added a perimeter offset parameter within the edit menu for floors drawn in "Wall" mode.
Added two "Wall Mode Options" to the Floors tab of the global settings: Perimeter Offset and Move Walls.
Connected the "Move Floor Edge" tool to the Medeek Wall API so that moving floor edges (Wall Mode Only) can also move walls.
Updated the Draw Flooring tool so that floor coverings can be applied to slabs, slab-on-grade foundations and floor trusses.

medeek

Tutorial 18 - Moving Walls with Floors (9:17 min.)

medeek

First look at a TRIFORCE Open Joist floor:

TRIFORCE® Open Joist: Peace of Mind Underfoot

The TRIFORCE® open joist is a state-of-the-art product in the forefront of the construction industry.

TRIFORCE® Open Joist (www.openjoisttriforce.com)

There has been some call for this product line so I am working on the algorithms so that it can be configured properly. It is a bit more complicated due to the directional nature of its trimming panel (only one end can be trimmed).

gullfo

yes! i have some custom DC to mimic this but it's flakey and i haven't revisted it, so have this "built-in" will be a nice feature.

medeek

Version 0.9.9s - 11.13.2024

Added the "Open Joist" floor family.
Added the following TriForce Open Joists: OJ3-11.875, OJ4-11.875.

medeek

First look at some RedBuilt (Red-W) open web floor trusses:

medeek

First look at a Nucor/Vulcraft (K Series) steel floor truss (top chord bearing):

Currently these are defined by 13 parameters but I may need an additional four in order to specify a top chord extension and the bottom chord extension on both ends.

gullfo

another consideration are vierendeel openings for ducts... etc

medeek

Various configurations and example usages of top-bottom and bottom-top for open web (Redbuilt) and steel trusses (K Series):

medeek

Version 0.9.9t - 11.19.2024

Added the "Open Web" floor family (RedBuilt: Red-L, Red-M, Red-S, Red-M, Red-H).
Added the following TriForce Open Joists: OJ3-14, OJ4-14, OJ3-16, OJ4-16.
Added the "Steel Truss" floor family (Nucor: K-Series).
Added a removal parameter for sill plates.

medeek

Version 0.9.9u - 11.23.2024

Added the "CFS" floor family: ClarkDietrich, JoistRite and TotalJoist.
Added additional logic for non-standard joist sizes for Open Joists (TriForce).
Addressed some minor bugs with metal bracing and other advanced options for top chord bearing trusses (Open Web and Steel).
Added a built-in steel material option for rim joists.

Let me know on any other floor framing system(s) that I should add.

medeek

Version 0.9.9v - 11.24.2024

Added a "Web Shield" option for PinkWood (PKI) I-Joists.
Fixed multiple bugs with the floor preset module.
Fixed a bug related to metric units within the edit menu.
Updated (Manufacturers: LP and PinkWood) links on the Floor plugin website.

They now have this new option called "WebShield":

medeek

Version 0.9.9w - 11.25.2024 thru 11.29.2024

Fixed multiple bugs with metric units within the attribute libraries and edit menu.
Fixed a bug with offset joists and metal bracing, blocking and insulation.

medeek

Tutorial 19 - Steel Trusses and Joists (18:19 min.)

medeek

Version 0.9.9x - 12.01.2024

Fixed a bug with the SUBTRACT_JOIST feature.
Updated the algorithm for large span Open Joist floors.

Rather than insert a fictitious joist size that does not actually exist I decided to insert two short joist products back to back. This seems to be the typical way to handle large span floors with this product (similar examples are given in the product literature). This update was also by customer request.

The update to the SUBTRACT_JOIST feature is a critical update and I highly recommend updating to this latest version if you are using that functionality. Since the boolean subtraction of the joists happens before the final floor assembly is created I had to account for the pre-transformation of the joist geometry and include this within the subtraction method.

gullfo

as a note though, it's also common to stagger the shorter joist sets to get more purchase on the supporting beam, certainly with plain wood or lam joists. thus one set of joists is shift to one side or the other of the opposing joists so they each extend to the full width of the beam.

probably not something you need to code though. if i needed to represent this, i would just create separate floor sections and nest them - so leave it as is now.

medeek

Version 0.9.9y - 12.04.2024

Added Steel Decks w/ Concrete Slabs (Verco): B-36, N3-32, W2-36, W3-36, SV, DV.

medeek

Tutorial 20 - Steel Decking (8:19 min.)

medeek

Version 0.9.9z - 12.07.2024

Added Roof Sheathing within the Advanced Options.
Added the following membrane types to the Roof Sheathing Module: BUR, MB, TPO, EPDM, PVC.
Enabled multi-ply insulation with the roof sheathing module.

medeek

Tutorial 21 - Roof Sheathing (7:13 min.)