Another solid-making problem
-
I am having another problem creating a solid. I have added below two concave surfaces that I offset. I am out of ideas how to make this solid. Hellllpppp!
-
One example with Curviloft (Fredo6).
(The sides are not coplanar, should they?)
-
From the 3 Arcs only the arc top one is coplanar!
So a creepy surface! It's a bad part of cheese!
No clean rotation possible, no easy past etc...
-
You could "stitch" this together rather quickly. Or you could add verticals at the 3 corners then skin each of the three sides with Curviloft. Group all and reverse the faces so that all outsides are the front or white material.
The way this was created, you could also use Extrusion tools- extrude edges by vector from one shell shape to the other (which seems to be a copy). Similarly you could have used Joint Push Pull--Vector Push Pull on one shape to extrude it up and make the second shell as well.
One way to stitch it is just with vertical lines point to point since the shapes are identical.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Advertisement