Hopper Dredger "Crane"

bupaje

Wow, amazing.

Maybe in the future we will have live tracking of ships via GPS so we can watch your ship models moving on Google Earth.

axeonalias

Thanks, Sketchup is by far the fastest at applying textures than any other modeling program i have ever seen,although this did take a while as there are 201 materials on the bridge alone
More details added on the bridge and a new helm modeled. Almost done here I guess,will still need to polish some areas and add some of the chairs, oh and all the fittings that sit on the ceiling.

Just noticed my reflection in one of the textures...Noob!

axeonalias

Chairs in and fine textures seperated,although you cannot see it all the textures that will need to retain resolution in bake have been seperated so that when it comes to baking it will have its own texture and you will (hopefully) still be able to read everything written on the instruments.

Heres a photo of the real interior vs the current model ( I didnt quite get the angle on this render but ill get it when everything has been added :

john.warburton

@bupaje said:

Wow, amazing.

Maybe in the future we will have live tracking of ships via GPS so we can watch your ship models moving on Google Earth.

Not Google Earth, but....

404 Not Found

(www.shipais.com)

designerstuart

amazing - thanks for taking time to explain

axeonalias

Well here is a shot of the final lighting setup, the rudder indicator is missing here but it is modeled,had to create a special texture for it, was quite a challange,ill get a post up for it soon

axeonalias

And heres the Final product in game : (Still need to add the instruments)

axeonalias

Getting there...Still need to render the new texture for the Wheel and get the throttles in,oh and of course the doors. But after adding the working bits and our renowned skipper,I thought Id show and tell.

jason_maranto

Looks great!

axeonalias

Thanks Jason, And heres another Angle with the new helm and doors :

bupaje

This is awesome work. You may have answered this before but I'm new - so what game is this in?

axeonalias

Thanks Bupaje, heres the link :
http://www.hangsim.com/vsf/

axeonalias

Work on the Model has finally begun,I decided on a scale of 1:40 which brings her overall length to 1.33m. The Hull Blueprints which where made in Sketchup from the Original Drawings, where printed onto a A0 page and Stuck onto a 1.8m x 1.0m .6mm Sheet of Plywood using woodglue,and then painfully cut out using a jigsaw cutter :

This is the same process when making a ship in sketchup, and its just as much fun! ....although the copy and paste buttons are disabled in real life.

SketchUpNoobie

Ooh. Looking forward to seeing how this turns out.

designerstuart

wow a true modelling fanatic!
beware: in real life, another tool that doesn't work is Ctrl+Z!

are you modelling for fun?

axeonalias

Thanks Guys,designerstuart Im building in for remote control will be one of the Durban remote control club additions

Well the virtual model has come to an end, here are some pics :

KiraNL

Warning the next content of "Hopper Dredger "Crane" might make you feel like a crappy modeler, continue at own risk.

hehe, Awesome work. ^^

axeonalias

Well after sitting 2 weeks without nails I finally got some, they are special brass artisania nails and there where none in the country!
So work on the Real models continues, I have the motor, coupling and shaft ready but its still some time before those go in, the hull is still being prepared for filling, which will be followed by a few layers of resin, then of to fiberglassing she goes, then everything you see in these pics will be destroyed

Bryan K

Wait. You've made other real life models and haven't shown us?!

axeonalias

Thanks BryanK,

Yup the other where not involved in Sketchup so not really relevant for this forum

First Layer of Filler applied and sanded,stil have lots more sanding to do,only have 2mm balsa planks so have to be carefull when sanding with a machine to not go to far, tricky areas get sanded by hand.
Designed the hopper and made it from 1.5mm Styrene, still working on the supports but I think this Idea will pass, once the hopper is filled you will be able to lift it out and dump the contents, unlike the real ship that has hopper gates on the bottom, my hopper is 20mm from the bottom, also after doing some calculations im going to oversize the grab abit , it should take about 50 full scoops to fill the hopper.

Hopper Dredger &quot;Crane&quot;

404 Not Found

Hopper Dredger "Crane"