[Plugin] Camera Recorder v1.7.2 UPDATED May 23, 2013
-
Hi Chris Fullmer
There is a problem I have please help
When I download clf_camera_recorder-v1.7
Knowing that I've downloaded in advance and did a wonderful job, but not what happened Lardy
A copy of the problem
Note
When I download clf_camera_recorder-v-1
The device Ballowavqp it
Please help in this problem
rode
-
It looks like you do not have the files put in the correct locations. In the plugins folder, you should have a single file and a folder
clf_camera_recorder_loader.rb
clf_camera_recorder<---FOLDERAnd inside the folder you should have the file:
clf_camera_recorder.rb
along with all the icons.
So check to see if that you have everything installed correctly and let me know if it works.
Chris
-
Hi Chris Fullmer
Thank you for the attention
And I would like to tell you in detail the problems of
At first you download the files as explained and you are quite successful and after two days .. got this error after you have downloaded the Camera Recorder v1.0
And succeeded in it and when I try to download Camera Recorder v1.7 the result is an error
I do not know what is wrong please helpI hope you send the file to my email
rod1233@hotmail.comThanks
-
Hi Chris
I think the problem in the size of the file in the image
clf_camera_recorder. employer
Because I do I replace the file Shahu Camera Recorder v1.0
The success
Please help
-
You should delete all camera recorder files. Then re-dnwload and re-install. See if that helps. I think that mighty do the trick. let me know how it goes,
Chris
PS What is your native language?
-
hi Chris
I have deleted all the files and the files you have to re-descend again, and I encountered the same problem
I do not know if the file size minus
I repeat, when I put the files for the first time the result was quite successful, but know what happened to get that errorI speak the Russian language
-
Hi Rod, I still don't see what the error is. The files are where they should be, their sizes are correct. They are very small files. The size discrepency is normal and it is due to how Windows stores files tot he disk.
Is SketchUp giving you an error? You have not posted any actual SketchUp error. If so, what does it say?
-
hi Chris
I can not succeed in this. I'm very sad for that
And thank you for the efforts made by me
I do not know where the problem
Perhaps there may be settings in the program led to this errorThank you
-
Rod, what is not working? Is it not appearing in SketchUp?
Maybe it just needs to be enabled. Go to Window > Preferences > Extensions and make sure that Camera Recorder is enabled.
See if that helps. Then let me know.
Chris
-
@plot-paris said:
hey Chris. I am afraid, the buttons of the toolbar end up blank.
the zip file, you posted contains a ruby file called 'clf_center_on_origin.rb' and a folder with the Camera Recorder files.
within this folder there is the camera recorder ruby, several images and an empty folder called 'images'.
but no matter, where I placed the images (within the images folder. or the images folder directly in the plugins folder) it doesn't seem to be workingHow was this resolved?
Rhett
-
arg, I responded to this, and then lost connection or something and it lost my reponse....oh well. I'll try again (plus the pm's we've been sending back and forth).
Essentially the problem they saw here was caused by something else, I forgot a file.
I just asked in my PM if you have podium installed (its another plugin that apparenetly can cause problems with plugin installation locations?). Lets take the onversation out of the PM area and here, just in case others can chime in with some Mac expertise.
Anyhow, you might need to upload a screenshot of your plugins floder so I can see what's going on.
Chris
-
No, you don't need podium installed. I had seen in another thread that it might complicate you mac installation folders or something.
So I would say that the best thing to do now would be to send a upload a screenshot of your plugins folder, and maybe one of the inside of the clf_camera_recorder folder also.
Chris
-
Hi Chris
I think I could not explain the problem. Although attaching the image.
When do I paste the files in the desired place, and I do open the program I get this window described the picture attached
Hee this problem.
Please note that I had originally succeeded in doing so for two days. And then I got this problem without any reason
Tried to get rid of this problem but to no avail
Thank you
-
I have a new thought Rod. I bet it is a problem with "compatibility files".
Go to the Plugins folder and look at the top for "compatibility files" click on that. It is a secret alternate version of your plugins folder (I'm serious). If there is anything about camera recorder in there, make sure to delete it! all files and folders.
Then see if SketchUp works right. If not, try deleteing all camera recorder files in the regular plugins fodler, double check that the compatibility files folder also has no camera recorder files.
Then once you are sure there are no camera recorder files or folders, then reinstall them.
Then check in sketchup. I have a feeling this will solve it. Windows compaitiblity files has cause this problem more than once.
Chris
-
Hi Chris
Thank you for the efforts
It tried to explained to me earlier.
But unfortunately the problem still exists.
Please search for a solution
Thanks
rod -
Hi Rod, please verify that you tried the Compatibility files suggestions. Your response does not state that you tried it.
Next, remove all other plugins from your plugins folder. Install only the camera recorder plugin. See if that works. Then we can go from there.
Chris
-
Hi Chris
I've done it and you delete all the contents of the folder plugins
And you do Install only the camera recorder plugin.
But the problem is not over yet
rod -
Chris, your camera tool is first class.
You don't need Quick time Pro. There is a freeware player who plays image sequences also. The name is IMAGEN.
Supported formats:
*
AC3, Dolby Digital compatible
*
AVI / DIVX / IVF, Windows Audio Video Interleaved
*
BAY, Bayer Image
*
BMP / DIB, Windows Device Independent Bitmap
*
CINE, Vision Research CINE, (read/uncompressed only)
*
FLC / FLI, Autodesk FLIC/FLIC-Pro
*
GIF, Graphics Interchange Format
*
HAV, High quality Audio Video
*
JP2, JPEG-2000 File Format / CodeStream
*
JPEG, Joint Photographic Expert Group
*
MPA / MP2 / MP3, MPEG-1/2 Audio Layer II/III (MP3 read only)
*
MPEG, Moving Pictures Expert Group, MPEG-1/2
*
OGG, OggVorbis Audio
*
OGV, OggVorbis Video/Audio
*
PCX, Zsoft Paintbrush
*
PNG, Portable Network Graphics
*
PNM / PPM, Portable Image
*
RAS / SUN, Sun Raster Image
*
RGB / SGI, Silicon Graphics Image
*
TGA, Truevision Targa
*
TIFF, Tagged Image File Format
*
WAV, Windows Wave Sound
* WMA, Windows Media Audio
* WMV, Windows Media Video
*
XPM, X-Pixmap
-
@rod1233 said:
Hi Chris
I've done it and you delete all the contents of the folder plugins
And you do Install only the camera recorder plugin.
But the problem is not over yet
rodGreat, thanks for trying that. Could you please take another screenshot of your plugins folder and inside the clf_camera_recorder folder.
Also, does the file path to your sketchup program contain any non-english standard characters? I know russian language characters might cause problems with things.
Chris
-
Great Charly, I'll post a link to that software in the first post of this thread. Thanks for finding it!
Chris
Advertisement