[Plugin] Axis components (Updated 6/12/2010)

pilou

Центра компонента>>> Centre du composant>>>
"Центр компонента " "Centre du composant "
"Низ центра компонента " "Centre Bas du composant "
"Верх центра компонента " "Centre Haut du composant "
"Левый дальний угол " "Left distant corner "
"Левый ближний угол " "Left near corner "
"Правый дальний угол " "Right distant corner "
"Правый ближний угол " "Right near corner "
"Центр на левой стороне " "Left center "
"Центр на передней стороне " "Front center "
"Центр на правой стороне "Right center "
"Центр сзади "Back center "

pilou

In French

    Центра компонента>>>      Centre du composant>>> 
    "Центр компонента  "            "Centre du composant  "
    "Низ центра компонента  "      "Centre Bas du composant  "
    "Верх центра компонента  "     "Centre Haut du composant  "
    "Левый дальний угол  "         "Coin Gauche distant  "
    "Левый ближний угол  "         "Coin Gauche proche  "
    "Правый дальний угол  "        "Coin Droit distant  "
    "Правый ближний угол  "          "Coin Droit proche  "
    "Центр на левой стороне   "      "Centre Gauche   "
    "Центр на передней стороне  "    "Centre Face   "
    "Центр на правой стороне         "Centre Droit   "
    "Центр сзади                     "Centre Arrière  "

alz

Missed this one -- nice little addition! I hated having to add temporary lines to find corner snap locations

jason_maranto

Very cool plugin -- if only someone would generate something like this that used the ease of setting axis position of this ruby combined with the align scripts function to move groups and components to each other... it's actually something I've wanted since I first started working with Sketchup but was always too afraid to try

Anyhow I took a stab at making a clearer english version of it and while I was trying to sort that out I decided to cobble together a context menu to make switching between them quicker...
just added this stuff at the end.
` if( not file_loaded?("axiscomp.rb") )

UI.add_context_menu_handler {|menu|
if(Sketchup.active_model.selection[0].typename == "ComponentInstance")
menu.add_separator
sub=menu.add_submenu("Orient Component Axis")
sub.add_item("Absolute Center") { centrcomponents1 }
sub.add_item("Bottom Center") { centrcomponents2 }
sub.add_item("Top Center") { centrcomponents3 }
sub.add_item("North-West Corner Bottom") { centrcomponentsright1 }
sub.add_item("North Side Center Bottom") { centrcomponentsrightstorona }
sub.add_item("North-East Corner Bottom") { centrcomponentsright2 }
sub.add_item("East Side Center Bottom") { centrcomponentsperedstorona }
sub.add_item("South-East Corner Bottom") { centrcomponentsleft2 }
sub.add_item("South Side Center Bottom") { centrcomponentsleftstorona }
sub.add_item("South-West Corner Bottom") { centrcomponentsleft1 }
sub.add_item("West Side Center Bottom") { centrcomponentszadstorona }
end #if ok

}

end`

Thanks again.

Best,
Jason.

alz

I actually wanted a Center East option today and realized it wasn't there.

Expanding the options shouldn't be hard, but the menu could get kinda crazy. Something like this would work:


axis=menu.add_submenu("Orient Component Axis")

	top=axis.add_submenu("Top")
		top.add_item("Center") { function }
		top.add_separator
		top.add_item("North") { function }
		top.add_item("North-East") { function }
		top.add_item("East") { function }
		top.add_item("South-East") { function }
		top.add_item("South") { function }
		top.add_item("South-West") { function }
		top.add_item("West") { function }
		top.add_item("North-West") { function }

	middle=axis.add_submenu("Middle")
		middle.add_item("Center") { function }
		middle.add_separator
		middle.add_item("North") { function }
		middle.add_item("North-East") { function }
		middle.add_item("East") { function }
		middle.add_item("South-East") { function }
		middle.add_item("South") { function }
		middle.add_item("South-West") { function }
		middle.add_item("West") { function }
		middle.add_item("North-West") { function }

	bottom=axis.add_submenu("Bottom")
		bottom.add_item("Center") { function }
		bottom.add_separator
		bottom.add_item("North") { function }
		bottom.add_item("North-East") { function }
		bottom.add_item("East") { function }
		bottom.add_item("South-East") { function }
		bottom.add_item("South") { function }
		bottom.add_item("South-West") { function }
		bottom.add_item("West") { function }
		bottom.add_item("North-West") { function }

thomthom

@sahi said:

@malaise said:

May be could you translate or give us the file to translate Axis positionning names

Did I translate correctly?

Центра компонента>>>      Center of component>>>  
> "Центр компонента  "            "Center of component  "
> "Низ центра компонента  "      "Bottom of center of component  "
> "Верх центра компонента  "     "Top of center of component  "
> "Левый дальний угол  "         "Left distant corner  "
> "Левый ближний угол  "         "Left near corner  "
> "Правый дальний угол  "        "Right distant corner  "
> "Правый ближний угол  "          "Right near corner  "
> "Центр на левой стороне   "      "Left center   "
> "Центр на передней стороне  "    "Front center   "
> "Центр на правой стороне         "Right center   "
> "Центр сзади                     "Back center  "

[attachment=0:3nck5g1d]axiscomp4.zip[/attachment:3nck5g1d]

Could you post all downloads in the first post please - makes it easier to locate them.

jason_maranto

I am teaching some video lessons on the Dynamic Component functions of Sketchup Pro and I would like to utilize a modified version of this plugin and give it to the students as I think it could simplify the DC creation process... what is the proper protocol for passing this on to others?

Best,
Jason.

sahi

@jason_maranto said:

what is the proper protocol for passing this on to others?

It is free.

thomthom

@sahi said:

@jason_maranto said:

what is the proper protocol for passing this on to others?

It is free.

Does not mean you can share things around as you like. You need to get the permission of the author unless you find some written statement that the author allows redistribution.

Chris Fullmer

Thanks for responding so quickly Sahi. Generally, unless the author gives permission otherwise:

The plugin should be downloaded from this site directly. People that have the plugin, should know where to go to get updates in the future, ask for help with the plugin, contact the author, etc. So for that reason, it is best if you can get people to download the plugin from here directly. Maybe sending out an email to your students with the plugin and direct links to this thread is enough? I'm not sure what the other authors would think about that.

jason_maranto

Thank-you Sahi, that is very generous -- If you'd like me to mention anything in particular or send them to this thread (or anyplace else) I will do so.

Best,
Jason.

jeff hammond

hi Sahi,

i think some of the locations are labeled improperly (or maybe this happened during the translation?)

if i select su's front view then choose 'right near corner' for the axis, it's actually placed on the right distant corner.. if i select 'left near corner' then the axis is placed at the right near corner.. etc.

everything is off by 90º.. (or, i'm just not properly orienting myself in the sketchup space?)

it's mostly the centers that i like about this plugin anyway and they aren't affected by this.

sahi

Maybe I'm wrong with the SU oriented;