Bad News for Architects in the next ver. of Google Sketchup
-
OK, I see, that's a different point then.
-
Yes, 'import' I should have said.
In my case, importing a DWG in SU is often the start of a new project.
-
I came to (down graded
"free" sketchup when my solid modeler went from hundreds of dollars to thousands between v1.1, and v2.0. Because I use Su primarily to visualize, dxf import is essential to my work flow. I am less concerned with paying for Su, then what this implies for the future of Su as an Architect's tool.To me, "Unfortunately, this improvement won't come without a cost. Import/export capability is tough for us to maintain and tough for you to use effectively. There are just so many fiddly little settings on both sides of a file exchange that it is always a challenge to get everything working just right. Looking forward, we decided to make a trade-off." suggest that at some point in the future, dxf may be abandoned.
This action implies that the Su database may under go massive change when v8 is released. Perhaps, animation will cease to be "free", as the documantation maintains. Maybe after they fix the shadow bug. Sigh........, I just hope that the cost of "Pro" doesn't jump into the thousands >_<
-
@unknownuser said:
Seems to me strange to pay a tons to Autodesk for their crappy monopole and complain about Google decision! The problem is ALWAYS closed and proprietary file formats that holds you in companies prison!
I do not tell that I am happy to pay tons to Autodesk, but when I want to support customers with their prefered data-format, then I have no other chance.
(And I have to accept that they want tons of money every 3 years.)
But Autocad is still a lot better in producing drawings/3D-content in a professional/automated way. (You can not use Ruby for SU-Layout)
Also it has still much more options to customise it for your own needs (LSP/DCL/CUI/VBA).Anyway I complain about Google that they are on the way to get the same behaviour like Autodesk.
And isn't SKP also a closed and proprietary file format? -
@hpw said:
@unknownuser said:
Seems to me strange to pay a tons to Autodesk for their crappy monopole and complain about Google decision! The problem is ALWAYS closed and proprietary file formats that holds you in companies prison!
I do not tell that I am happy to pay tons to Autodesk, but when I want to support customers with their prefered data-format, then I have no other chance.
(And I have to accept that they want tons of money every 3 years.)
But Autocad is still a lot better in producing drawings/3D-content in a professional/automated way. (You can not use Ruby for SU-Layout)
Also it has still much more options to customise it for your own needs (LSP/DCL/CUI/VBA).Anyway I complain about Google that they are on the way to get the same behaviour like Autodesk.
And isn't SKP also a closed and proprietary file format?@unknownuser said:
We originally assumed that our free Google SketchUp users would never really need to export models into other tools. As it turned out, folks wanted to use Google SketchUp models in all kinds of crazy ways. Things that we could never have imagined! We decided that Google SketchUp users should be able to export their models into some easy-to-read and fundamentally hackable file format to make this easier. Your models should be yours to do with as you see fit.
In our next release, we're going to make COLLADA an official first-class format for all modelers. You'll be able to import and export COLLADA models, as well as COLLADA models wrapped up in the KMZ format for Google Earth, with any version of SketchUp.We are not talking about software capabilities, but data formats and data exchange! You have to own your files and exchange them freely with others. Draw with AutoCAD, save the files in an open file format and send to anybody even without AutoCAD licence.
-
this is really odd. to my knowledge most modelling in sketchup starts with a dwg/dxf import whereas i never heard of anyone importing anything in collada format.
so why would google do this? to boost sketchup pro sales?
a question: can you export in collada from autocad? and would it be the same importing a plan in collada as it is today in dwg/dxf?
-
-
@unknownuser said:
Draw with AutoCAD, save the files in an open file format and send to anybody even without AutoCAD licence.
First autocad would have to support this open file format!
(And it is not sure that any other data-format transport the datat exactly as DWG.)@unknownuser said:
a question: can you export in collada from autocad? and would it be the same importing a plan in collada as it is today in dwg/dxf?
The Google Earth plugin from the autodesk labs seems to support this!
One drawback is that only Autocad 2007 and up are supported.
(I have currently Autocad 2006 running) -
@unknownuser said:
First autocad would have to support this open file format!
(And it is not sure that any other data-format transport the datat exactly as DWG.)Then ask Autodesk to fully support collada export - you are paying for their softwarae, not for the free SketchUP! Or to fully open dwg file format! Big boys always try to kill the small fishes - here in East Europe multinational companies are doing this since democracy!
-
I suspect this is the beginning of the end of the pro version: way to see how many dedicated pro users really exist before dumping the rowdy bunch we are.
-
Let's not jump to negative conclusions just yet, remember he also said "I think you'll be pleasantly surprised by many of the changes we've made",
, I would trust him on this one. -
I'm hoping you know something we don't Pete!
-
If i remember well when i had skp 5 i was hoping for great improvements to skp6 and when comes out.. it was almost the same...same happened with skp7 which i almost find slower than 6 and i even don t use it..
To believe they made great improvements I have to see first..
My most wanted improvement is supporting high polys models...if this is fixed i almost don t need anything else..of course an integrated render engine will be high5,but that s something more difficult and much expensive .
My 0.002$!Elisei
-
Well, I have the Pro version so I'm more interested in what's actually coming - proper 64 bit and GPU support and therefore real improvements in performance maybe? I'm happy to pay for software that has real value and is up to date.
I'd rather Google actually made money from Sketchup and then had a real incentive to keep supporting it. Ever since they bought @Last the momentum just seems to have slowed down IMHO
John
-
@unknownuser said:
For those of you who depend on the importers we plan to remove, we'll be providing an optional download that enables them again. But remember! This installer will only be available for a limited time, and it will not be supported at all in our next major release.
This statement in the post seems to indicate that it's not going totally away if that's hope to any of you.
-
What are the ramifications for the Education Side of SU? I teach SU to Interior Designers at a private college and they use Google FREE Version (they are students after all) and they import their Acad Floor plans into SU For their presentations. This sounds like it would seriously interupt their work flow. I do not COLLADA at all, so I guess I need to look at it, but Some answers to these quesitons would be helpful.
Let's all sing
If you like Using Collada. .. or getting caught in the rain. . .If you like using PRO sketchup. . .if you have half a brain. .. -
Also, why not keep a version of SU7 around and import using that - you could open the model in SU8 afterwards?
-
@tomsdesk said:
I suspect this is the beginning of the end of the pro version: way to see how many dedicated pro users really exist before dumping the rowdy bunch we are.
tom,
you are the second to suggest that but i do not see any grounds for that assumption in the quoted statement. they are saying the dwg/dxf import will come out of the free version and that it will be kept in the pro. thus in what way this amounts to dropping it? -
Hi Ed, I too "fear" along with Tom, but would be happy to be wrong. The support for importing dxf to "free" Su will not be supported, perhaps implying changes to the v8+ database. The stated difficulty they are having with dxf, suggest that for 3d to grow, it may have to be dropped.
I have not heard of "collada", is it a text file like dxf? My software has no support for "collada". Is there a dxf2collada utility?
In fairness to Google, v7 included dynamic components, and a better layout (neither of which I use). Each of us have unique ways of using Su, but for some of us Architects, Google is just not growing in our direction:-(
I suppose like a lot of other software in my system, I may just have to stop upgrading Su versions, and hope that other products will fill the gaps.
-
DWG drawings other people send to me are often so poorly drawn and cluttered that I've had to spend entire hours doing clean-up before being able to use those lines in SketchUp. Not anymore. Now I export those drawings as bitmaps from DoubleCAD XT, reverse the brightness in GIMP, and set the proper scale in SketchUp. A much cleaner start
.BTW, mhtaylor does have a point. Even if in the future you receive a file in a new dwg format SU7 can't open anymore, you can always convert it to a previous version with the free utility EveryDWG. Just make sure you keep the SU7 free installer in a safe place before it becomes abandonware.
Advertisement