DC StairCaseBuilder

Howard leslie

Brooke,
Some Top Tips for you ...
Use StairCaseBuilder to design the bulk of the Staircase, then ...
Finish off handrailing as shown - ProfileBuilder or PipeAlongPath Ruby Scripts help in this task.
...........
See attached file to give you some ideas.
StairCaseBuilder incorporates Horizontal (Handrail) and Vertical (Stanchion) Guidelines.
These are GUIDELINES that can be further enhanced or detailed to complete your staircase as required.
..........
Handrailing GUIDELINES (simple lines) are used in this DC (as opposed to more detailed handrailing) as the possibilities / combinations for more detailed handrailing are infinite eg

Position and Spacing of Stanchions.
No and position of Horizontals / Verticals
Handrailing / Stanchion Cross Sections, Which to choose ? eg Circular, Oval, Semi-Circular, Square, Rectangular or a more detailed / fancy section ?
..........
See other notes / images / ideas in the first post of this thread
..........
Hope this helps
Regards
Howard L'

StairCase_4in_Horizontals.skp

domus

Thank you! You've made me appreciate dynamic components and glad I chose to get SU Pro. This is a real time saver!

domus

I hope my last post doesn't give the impression that you can't use this Dynamic Component with SU free. You can, of course. I mean it's inspired me to learn more about how to create them, which you can only do in SU Pro.

Howard leslie

Domus,

@unknownuser said:

Thank you! You've made me appreciate dynamic components and glad I chose to get SU Pro. This is a real time saver!

In case you haven't seen it yet - you may also like to try this DC for creating doors (another time saver). I created it because I found that I was forever having to model doors from scratch - this DC is also animated (use magic finger icon on DC toolbar):

http://forums.sketchucation.com/viewtopic.php?f=289&t=21350

Hope this helps
Regards
Howard L'

domus

Thanks again Howard, I didn't know about that one. Another gem!

penumbra

I just wandered in to this post. This is absolutely fab!, thanks!

mac1

Howard
Hoping you are still watching this post. Have a problem in river city.
have xp sp3 and su 7.1+ free. Was trying to evaluate your builder but cannot get the input box to appear. Have tried various thing but no joy. Is this a limit of free or do I need 8

Howard leslie

mac1,
StairCaseBuilder is a Dynamic Component (SU version 7 file format)
All users of SketchUp can take advantage of DCs - both Free & Pro.
SU 7 & SU 8 can both use Dynamic Components
...........
TO USE THIS DC:

Open Component File - Don't Import it into an existing SU Model
(but see note below).
...
Bring up DC Toolbar: View - Toolbars - Dynamic Components
Dynamic Components Toolbar - Yellow Middle Icon - Component Options
Click on DC
Dialog Box Options should appear
...
Set options
Apply
...
Copy & Paste DC Staircase into your own model
.....................
You can actually import this DC into an existing model like a regular Component but the DC will be nested 1 Level down
(Look at Outliner).
You can still bring up the Dialog Box but you'll have to go inside the Components Context to do this.
(or Explode the outer most Component once)
..............
Hope this Helps / Make Sense

Regards
Howard L'

mac1

@unknownuser said:

mac1,
StairCaseBuilder is a Dynamic Component (SU version 7 file format)
All users of SketchUp can take advantage of DCs - both Free & Pro.
SU 7 & SU 8 can both use Dynamic Components
...........
TO USE THIS DC:

Open Component File - Don't Import it into an existing SU Model
(but see note below).
...
Bring up DC Toolbar: View - Toolbars - Dynamic Components
Dynamic Components Toolbar - Yellow Middle Icon - Component Options
Click on DC
Dialog Box Options should appear
...
Set options
Apply
...
Copy & Paste DC Staircase into your own model
.....................
You can actually import this DC into an existing model like a regular Component but the DC will be nested 1 Level down
(Look at Outliner).
You can still bring up the Dialog Box but you'll have to go inside the Components Context to do this.
(or Explode the outer most Component once)
..............
Hope this Helps / Make Sense

Regards
Howard L'

Thanks for the quick reply. In ISO 1 context of Dc selected a step then component option .Ruby consul states
Error: #<TypeError: cannot convert nil into String>
(eval):1321:in set_file' (eval):1321:in show_dialog_orig'
(eval):7558:in show_dialog' (eval):7598:in show_configure_dialog'
(eval):155:in initialize' (eval):147:in call'
Error: #<TypeError: cannot convert nil into String>
(eval):1321:in set_file' (eval):1321:in show_dialog_orig'
(eval):7558:in show_dialog' (eval):7598:in show_configure_dialog'
(eval):155:in initialize' (eval):147:in call'
If I follow your instructions, tool bar, yellow icon, then click on the DC I get just one error. Bummer

mac1

Howard
Update for you.
Regressed back to SU 7.0 free, after a copy of may installed SU 7.1 plugins and tools to desk top, and your DC worked OK
Re-downloaded SU7.1 free with the as supplied Google plugins and tools, and your DC works OK
Search is now on for "bad" plugin or
Thanks again for your help

7348su

Love it very much, thanks.

Dropout

And we get it where?

pbacot

@dropout said:

And we get it where?

See the first post in the thread.

Sort of the standard here for plugins and components: The download is usually in the first post--even for updates.

I am downloading this one. Fantastic work! Thanks so much. Peter