[Plugin][$] Tools On Surface - v2.6a - 01 Apr 24
-
-
Thank you so much for the icons and cursors, Max..!!
They sure look GREAT..!!
-
Hi Fredo,
Maybe an idea for a next on-surface-tool: ' paint-on-surface'
Just like the new Cinema4D plugin:
see movie: http://www.dns-plugins.de/video/pos_1_overview.movAlthough, when I think about it...maybe this would be a feature to add to the existing 'component spray' ruby...
-
are you sure you installed the 24 pixels ones? (TOS_IconsCursors_24)
-
Very design icons! it's like a dream
Seems there is something with large buttons on the toolbars
Seems jpg compress ??? Maybe I miss something
they are fine on the screen work
Little buttons icones works fine[Edit]it was me ! I had not install Large cone file
-
Yes I have missed that
see my previous edited post
But i have always a problem
what must be the organisation of folders TOS_IconsCursors_24 and TOS_IconsCursors_16 inside the Plugins folder?
because I have the same problem now for the little button
I must miss again something -
large toolbars use 24 pixel icons, small 16 pixels.
but TOS does not load them automatically, so if you want small toolbars put the 16 in the folder - if large the 24
a quick way is to zip both set of icons in the TOS folder - when you want to change them just "unzip here" and overwrite all files (i use winrar).
-
@unknownuser said:
but TOS does not load them automatically
Ok all is clear now, I full understand my problem
-
@cadfather said:
large toolbars use 24 pixel icons, small 16 pixels.
but TOS does not load them automatically, so if you want small toolbars put the 16 in the folder - if large the 24
a quick way is to zip both set of icons in the TOS folder - when you want to change them just "unzip here" and overwrite all files (i use winrar).
CadFather,
First of all, thanks for your hard and impressive work on the icons and cursors. I am glad to see that this is appreciated by users.
The TOS script actually makes provision of big and small icons. The naming convention is to append **'_24'**or **'_16'**to the icon filename for big and small icons, respectively.
It is only because I am lazy that I did publish only one set (and in 32x32 by the way).
The attached archive contains your two sets of icons and cursors merged into one set, with the proper naming convention. All .png files should just be extracted and dropped in the folder TOS_Dir_13
Again, thanks very much
Fredo
-
Master Fredo... Thanks and hats off -
works just like sketchup 8 - if only i was half as lazy as you!
-
Some more easy and confortable now
-
Hi Fredo, i don't think this same 16/24 system applies to bezier as well - had a look at the scripts but cannot locate/attempt how to make the switch automatic..any pointers would be great..
-
Thankss
-
@cadfather said:
Hi Fredo, i don't think this same 16/24 system applies to bezier as well - had a look at the scripts but cannot locate/attempt how to make the switch automatic..any pointers would be great..
No, Bezierspline is an old script now, but I plan to refresh it at some point in time.
This being said, it would be relatively simple to make just the modification about icons. Let me think about it. -
..it would be great to have _16, _24 naming convention like TOS - but all in your own time of course
-
CadFather,
For easier access to your set of icons and cursors, I edited the first message of this thread and attached the archive file.
http://www.sketchucation.com/forums/scf/viewtopic.php?f=180&t=11212&st=0&sk=t&sd=a#p76625Fred
-
Hello all, it's my first message here...
Thanks to Fredo6 for this awesome plugin, it's very useful.
I've just seen a little bug in the arc display. When you move an arc created with this plugin, the center point (displayed by a cross) doesn't move.
It would be nice to have the tangent constraint when you create an arc after an other or a line to have a continuity.
FkY_
PS : sorry for my "garbage english", I do my best but...
-
@fky said:
I've just seen a little bug in the arc display. When you move an arc created with this plugin, the center point (displayed by a cross) doesn't move.
Not really a bug actually. the script just create a construction point for the arc center for convenience (as it should maybe in native Sketchup!). But the construction point is not really part of the arc and does not keep any connection with it afterward.
@fky said:
It would be nice to have the tangent constraint when you create an arc after an other or a line to have a continuity.
Yes, that would be nice. On a Surface, it is however a little bit tricky, though probably feasible.
-
@unknownuser said:
CadFather,
For easier access to your set of icons and cursors, I edited the first message of this thread and attached the archive file.
http://www.sketchucation.com/forums/scf/viewtopic.php?f=180&t=11212&st=0&sk=t&sd=a#p76625Fred
oh..i'm honoured to have my name next to it!
-
Thank youThank youThank you
Advertisement