Molding Profiles

[RonS]

Here are a couple molding profiles. I will be adding more here soon. All files are in version 5.

Here is a link if you need something special http://www.forestermoulding.com/

Here is another good link http://www.enkeboll.com/2DLA/start.htm

And one more http://www.fypon.com/Default.asp?bhcp=1

Download Here (astragals ver.5 welded)

Download Here(crown ver.5 welded)

Download Here (bar ver.5 welded)

Download Here (Stops ver.5 welded)

Download Here(basecaps ver.5 welded)

Download Here(picturerails ver.5 welded)

Download Here(handrails ver.5 welded)

Download Here(baseshoes ver.5 welded)
[url=http://www.sketchucation.com/forums/scf/sas/Components/baseshoesV5.jpg:3w4zfbgm]

[/url:3w4zfbgm]

[url=http://www.sketchucation.com/forums/scf/sas/Components/casingsV5%20WELDED.zip:3w4zfbgm]Download Here(casings ver.5 welded)[/url:3w4zfbgm]
[url=http://www.sketchucation.com/forums/scf/sas/Components/casingsV5.jpg:3w4zfbgm]

[/url:3w4zfbgm]

[url=http://www.sketchucation.com/forums/scf/sas/Components/chairrailsV5%20WELDED.zip:3w4zfbgm]Download Here(chairrails ver.5 welded)[/url:3w4zfbgm]
[url=http://www.sketchucation.com/forums/scf/sas/Components/chairrailsV5.jpg:3w4zfbgm]

[/url:3w4zfbgm]

[url=http://www.sketchucation.com/forums/scf/sas/Components/baseV5%20WELDED.zip:3w4zfbgm]Download Here(base ver.5 welded)[/url:3w4zfbgm]
[url=http://www.sketchucation.com/forums/scf/sas/Components/baseV5.jpg:3w4zfbgm]

[/url:3w4zfbgm]

[url=http://www.sketchucation.com/forums/scf/sas/Components/apronsV5%20WELDED.zip:3w4zfbgm]Download Here(aprons ver.5 welded)[/url:3w4zfbgm]
[url=http://www.sketchucation.com/forums/scf/sas/Components/apronsV5.jpg:3w4zfbgm]

[/url:3w4zfbgm]

[Ross Macintosh]

What a great resource Ron! Thanks muchly! Your-da-man!

[tomsdesk]

A couple...? Geez, Ron...thanks! (He ever says "a bunch" watch out people :`)

You're a hoot, Tom.

[not registered yet]

Thanks RonS,
they're very usefull.
i downloaded them all and tried some of'em.
greetings

poster-me3mar

[boofredlay]

WOW

[otb designworks]

Ron, you never cease to amaze. Thank you much!

[Mike Lucey]

Cheers Ron, just about every profile under
the Sun

[matt4]

Thanks alot Ron. How are things going on the other side of the river?

[Krisidious]

this is ao awesome Ron, you just saved me countless hours... and imporved my models...

I might add to those of you, who might use these... to use the "weld" script on the curved surfaces before you push pull... this will give you a nice edge...

again thanks a lot Ron

[juju]

@unknownuser said:

I might add to those of you, who might use these... to use the "weld" script on the curved surfaces before you push pull... this will give you a nice edge...

Kris, please elaborate a little...

[RonS]

Your welcome. I am almost done with the cove molding. I will get them up as soon as I get them done (about half way of getting them posted).

Your right Kris. Run the weld script. I just did not think of it at the time I was making the faces.

JUJU-this script welds all of the segments of a curve together to make one segment. It will save you clean up on all of the curves when you pull the face.

Matt4-SAME OLD SAME OLD. Why would it change. How's the new job?

[Vasthi]

Thank you Ron! These are great and extremely useful
Cheers!

[rhankc]

Ron,
U-da-man! Really...
I used to think I had the best moulding profile collection.....ever....
I have never seen such an EXTENSIVE collection as this......and To even think someone elses moulding profiles would be OK to use....Usually the corners are round, the curves are terrible, you know 6 segment circles.....but this has GREAT CURVES and CRISP CORNERS......curves as nice as the Poufs I saw posted earlier.......Seriously nice work.. and THANK YOU.

[Krisidious]

yeah Juju what ron said... it cleans up the push/pull and soes not ave the vertical or horizontal lines...

what I see is that each of us would have paid $10.00 for this... and in a sketchup model download area... this group would kick ass....

[juju]

Aaaah, I see its available from Smustard, and for free. (Thx Rick! )

[RonS]

Added crowns and astragals.

[RonS]

That's good. Your welcome.

[PKast]

Ron, awesome collection of moldings. Having been a trim carpenter for more than 25 years, I just love moldings. I certainly appreciate the time, the effort, and the generosity. Many thanks.

[humanticnc]

@pkast said:

Ron, awesome collection of moldings. Having been a trim picture frame for more than 25 years, I just love moldings. I certainly appreciate the time, the effort, and the generosity. Many thanks.

humanticnc
http://www.webforditas.hu/index.php

[dylan]

Thanks Ron, how did I miss these!

Excellent stuff and great tip about the weld script guys.

Dylan