[Plugin][$] RoundCorner - v3.4a - 31 Mar 24

Dave R · 14 Oct 2016, 11:58

@Numerobis, try making the shape but with the settings like this:

numerobis · 14 Oct 2016, 12:12

Ok, no i'm officially an idiot.
Maybe i should have read the tooltips... i thought the continous line would be a hard edge an didn't realize that grey means smooth. Thanks for pointing this out Dave!

And sorry fredo that i bugged you with my "problems"

davionkia · 29 Nov 2016, 09:44

ty

FZSarasota · 14 Dec 2016, 08:07

I just tested it in 2017, Works Great!!! Thanks for the plugin, saves me a lot of time working in SU2017.

-Terry

pebkac000 · 27 Dec 2016, 06:21

Great plugin. Thank you very much.
It is so easy to select the edges and configure for the required result.

valid8r · 29 Dec 2016, 21:47

A question. I'm thankful for this plug in. I've installed it on two machines, one running Win10 and one running Win7. Both install and the Win7 version works great, but the Win 10 'compresses' the window that gets loaded when I select one of the three cube icons. This means I can not control the parameters for RoundCorner. Is this a known issue with a solution?

ipsketchpi · 30 Dec 2016, 16:28

Maybe silly question, but I cant get those edges visible, have tryed all without luck please help

Dave R · 30 Dec 2016, 16:37

@ipsketchpi said:

Maybe silly question, but I cant get those edges visible, have tryed all without luck please help

Maybe you haven't tried all

ipsketchpi · 30 Dec 2016, 18:33

hmm, you have done it with "Sharp corners in 3D" and have choose one segment property for round corner.
But can you repeat the same with "Bevel edges and corners" ?

fredo6 · 31 Dec 2016, 18:25

@valid8r said:

A question. I'm thankful for this plug in. I've installed it on two machines, one running Win10 and one running Win7. Both install and the Win7 version works great, but the Win 10 'compresses' the window that gets loaded when I select one of the three cube icons. This means I can not control the parameters for RoundCorner. Is this a known issue with a solution?

Do you have a picture of the situation on Win 10. Do you have a high resolution screen ?

Fredo

sirtet · 10 Jan 2017, 09:57

SU 2017 complains about an outdated signature... Is there a new version of RoundCorner, or a workaround?

Dave R · 10 Jan 2017, 10:16

There are loads of extensions that show as having outdated signatures. It doesn't prevent them from working. They still work just fine in SU2017 as does this one. The most recent version of Round Corner is in the SCF Extension Store.

sirtet · 10 Jan 2017, 12:38

Thanks Dave.
My confusion came from me not finding the UI...
I was looking in the Tools menu etc, but did not find anything.
In SU16 a toolbar window opened, but not in SU17, so i thought it was not working due to the signature-problem...

Now i use the context menu on the toolbar to bring up the rounded corner icons. Shouldn't there be also some menu entry?

Dave R · 10 Jan 2017, 12:42

There's a toolbar for RoundCorner and it's also available in the Tools menu.

Splunk · 18 Jan 2017, 01:03

Hi,
Where is the download link? I cannot find it in the opening thread post.
Cheers for any help in advance.
Splunk

sirtet · 18 Jan 2017, 11:07

i got it from the sketchukation store in SU...
else' there's a PluginStore link on every Sketchucation page.
http://sketchucation.com/pluginstore?pln=RoundCorner

Dave R · 18 Jan 2017, 11:13

@splunk said:

Hi,
Where is the download link? I cannot find it in the opening thread post.
Cheers for any help in advance.
Splunk

Apparently you didn't read the first post in the thread as it is very clearly indicated.

As sirtet mentioned, Get extensions from the SCF Plugin Store. Install the tool from Resources at the top of the page and automatically install the extensions correctly.

Splunk · 18 Jan 2017, 22:27

@dave r said:

@splunk said:

Hi,
Where is the download link? I cannot find it in the opening thread post.
Cheers for any help in advance.
Splunk

Apparently you didn't read the first post in the thread as it is very clearly indicated.
[attachment=0:ad62yv1w]Screenshot - 1_18_2017 , 5_12_32 AM.png[/attachment:ad62yv1w]

As sirtet mentioned, Get extensions from the SCF Plugin Store. Install the tool from Resources at the top of the page and automatically install the extensions correctly.

Thank you, but 'apparently' I did find the link after I weighed through the lengthly first post again and found that tiny little line you describe while you were moderating my email.

That first post is a visual disaster and needs a clean-up. A myriad of text colors (which you think may be links) and a myriad text thicknesses and sizes. There's no consistency. It looks like Willy Wonka threw up on a Thread post.

We don't need to click on garish colored graphic button links like the 'Overview - Purpose' graphic that serves no purpose and leads nowhere.

Show us image results of the corner plugin in action and that's it.

That main post should have all Black, Regular Type. Black Bold for Small Headings.
ONE up-to-date Download Link Button for the latest LibFredo.
ONE up-to-date Download Link Button for the latest RoundCorner Plugin.

Love the Plug-In....though it already should be in the App....and after nearly 8 years, that first post seriously needs a makeover.

Dave R · 19 Jan 2017, 17:09

Most users are using the Sketchucation Extension Store to automatically install extensions like Round Corner and to keep them updated. They aren't downloading them individually to install them manually. You could do the same.

fredo6 · 19 Jan 2017, 20:23

@splunk said:

That first post is a visual disaster and needs a clean-up. A myriad of text colors (which you think may be links) and a myriad text thicknesses and sizes. There's no consistency. It looks like Willy Wonka threw up on a Thread post.

You are free to have and express an opinion.

The design of the main post is intentional. The big colorful fonts highlight what is important. If you had read them, and just them, I guess you have not even raised your question on installation.

Fredo