Get MAC Address

driven

@gary
couple of changes needed to run on my mac,
got rid of class variables
added windows =
added simplified regex = with .. for grep

def get_mac_address()
windows  = ( ( RUBY_PLATFORM =~ /darwin/i ) == nil )
return mac_address if defined?( mac_address )

mac_addr = []
cmd = windows ? 'ipconfig /all' ; 'ifconfig'

# choose lines that have only six pairs of 2 char hex values separated by either a ; or -
# pattern must start with a space and be at the end of the line
# there can be white space at the end of the line
regex = Regexp.compile("(..[;-]){5}..")
lines = %x[#{cmd}].split("\n").grep( regex )
lines.each{|line| mac_addr << (line.strip[-17,17]).gsub( /-/, ';' ) }

# if windows and we have more than 1 mac address use the second one otherwise use the first
# if not windows then use the first address
index = windows && mac_addr.length > 1 ? 1 ; 0
mac_address = mac_addr[index]

return mac_address
end

> get_mac_address 00:1e:c4:16:08:46

Garry K

Thank-you very much, I appreciate this, since I don't have access to a mac.
I will test on Windows with your simplified regex.

You show the mac_address as lower case - can you confirm that is indeed the output.
Also - off topic - but how do you get the source code to go into the embedded window?

driven

@garry k said:

You show the mac_address as lower case - can you confirm that is indeed the output.

yes it's lower-case, I realised that obscuring it in my other posts was counter productive, so I just adjusted only the number values to show the return this time...
@unknownuser said:

Also - off topic - but how do you get the source code to go into the embedded window?

Garry K

Thanks again. I checked the code for windows and it works fine.
I've added an upcase on the following line

lines.each{|line| mac_addr << (line.strip[-17,17]).upcase().gsub( /-/, ':' ) }

jaimeda

Hello

This works fine in Sketchup 2013 but not in 2014.

Any tips?

tt_su

@jaimeda said:

This works fine in Sketchup 2013 but not in 2014.

Due to the upgrade of the Ruby core this broke. We haven't been able to figure out why. But the workaround is to pipe the result from the command to a temporary file and read it after executing the command.

<span class="syntaxdefault"><br />tempfile&nbsp;</span><span class="syntaxkeyword">=&nbsp;</span><span class="syntaxstring">"C;/Users/Thomas/Desktop/temp.txt"<br /></span><span class="syntaxkeyword">`</span><span class="syntaxstring">ipconfig&nbsp;/all&nbsp;>&nbsp;#{tempfile}</span><span class="syntaxkeyword">`<br /></span><span class="syntaxdefault">puts&nbsp;File</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">read</span><span class="syntaxkeyword">(</span><span class="syntaxdefault">tempfile</span><span class="syntaxkeyword">)<br />&nbsp;</span><span class="syntaxdefault"></span>

jaimeda

Thanks Thomas.

It works perfectly.

Garry K

@tt_su said:

@jaimeda said:

This works fine in Sketchup 2013 but not in 2014.

Due to the upgrade of the Ruby core this broke. We haven't been able to figure out why. But the workaround is to pipe the result from the command to a temporary file and read it after executing the command.

<span class="syntaxdefault"><br />tempfile </span><span class="syntaxkeyword">=</span><span class="syntaxdefault"> </span><span class="syntaxstring">"C;/Users/Thomas/Desktop/temp.txt"<br /></span><span class="syntaxkeyword">`</span><span class="syntaxstring">ipconfig /all > #{tempfile}</span><span class="syntaxkeyword">`<br /></span><span class="syntaxdefault">puts File</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">read</span><span class="syntaxkeyword">(</span><span class="syntaxdefault">tempfile</span><span class="syntaxkeyword">)<br /></span><span class="syntaxdefault"> </span>

In my C++ programming for windows I would create a temp file this way

tempfp = tmpfile();

Is there anything in Sketchup that would do the same for both Windows and Mac?

tt_su

Well,... since we now have the Ruby Standard Library available: http://ruby-doc.org/stdlib-2.0.0/libdoc/tempfile/rdoc/Tempfile.html

So an updated example would be:

<span class="syntaxdefault"><br /></span><span class="syntaxkeyword">require&nbsp;</span><span class="syntaxstring">'tempfile'<br /></span><span class="syntaxdefault">file&nbsp;</span><span class="syntaxkeyword">=&nbsp;</span><span class="syntaxdefault">Tempfile</span><span class="syntaxkeyword">.new(</span><span class="syntaxstring">'my_prefix'</span><span class="syntaxkeyword">)<br /></span><span class="syntaxdefault">file</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">close<br /></span><span class="syntaxkeyword">`</span><span class="syntaxstring">ipconfig&nbsp;/all&nbsp;>&nbsp;#{file.path}</span><span class="syntaxkeyword">`<br /></span><span class="syntaxdefault">puts&nbsp;File</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">read</span><span class="syntaxkeyword">(</span><span class="syntaxdefault">file</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">path</span><span class="syntaxkeyword">)<br /></span><span class="syntaxdefault">file</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">unlink<br /></span>

Dan Rathbun

Weirdly the backquotes, & %x strings which use the ()` method, work on my machine.

And I verified that I do not have the backquote_patch.rb (that I proposed,) loaded.

Chris Fullmer

We have seen that if a user drags a skp model onto their SU icon, then they work. but if they double click on a skp model file, or double click on the SU icon, then it does not work. Are you seeing it work in both scenarios?

Garry K

@tt_su said:

Well,... since we now have the Ruby Standard Library available: http://ruby-doc.org/stdlib-2.0.0/libdoc/tempfile/rdoc/Tempfile.html

So an updated example would be:

<span class="syntaxdefault"><br />require </span><span class="syntaxstring">'tempfile'<br /></span><span class="syntaxdefault">file </span><span class="syntaxkeyword">=</span><span class="syntaxdefault"> Tempfile</span><span class="syntaxkeyword">.new(</span><span class="syntaxstring">'my_prefix'</span><span class="syntaxkeyword">)<br /></span><span class="syntaxdefault">file</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">close<br /></span><span class="syntaxkeyword">`</span><span class="syntaxstring">ipconfig /all > #{file.path}</span><span class="syntaxkeyword">`<br /></span><span class="syntaxdefault">puts File</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">read</span><span class="syntaxkeyword">(</span><span class="syntaxdefault">file</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">path</span><span class="syntaxkeyword">)<br /></span><span class="syntaxdefault">file</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">unlink<br /></span>

This is great for 2014 and forward - but what if you want to support earlier versions.

I guess we have to either use a one size fits all strategy or check the version an branch appropriately.

Dan Rathbun

There are whole topic threads on using the TEMP directory.

No problem on Mac OSX...

The issue on PC is unicode characters in usernames, which cause Ruby 1.8.x to choke.

So some coders create a TEMP subdir of THEIR specific plugin's folder.
(I think this is better than creating any temp folders in the root dir of the system drive.)

Dan Rathbun

@chris fullmer said:

... but if they double click on a skp model file, or double click on the SU icon, then it does not work. Are you seeing it work in both scenarios?

NO neither.

I see now, I either have used a pinned shortcut copy (of the desktop icon,) on the taskbar, or a copy on the StartMenu, or from a popup menu of the Desktop taskbar.
These are all single-click ways of launching SketchUp. I usually start SU this way because the Desktop is covered up.

jaimeda

I think this works in 2014 and earlier

<span class="syntaxdefault">IO</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">popen</span><span class="syntaxkeyword">(</span><span class="syntaxstring">"ipconfig/all >temp.txt"</span><span class="syntaxkeyword">)</span><span class="syntaxdefault"> </span><span class="syntaxkeyword">{|</span><span class="syntaxdefault">fd</span><span class="syntaxkeyword">|</span><span class="syntaxdefault"> fd</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">readlines</span><span class="syntaxkeyword">}<br /></span><span class="syntaxdefault">lines </span><span class="syntaxkeyword">=</span><span class="syntaxdefault"> open</span><span class="syntaxkeyword">(</span><span class="syntaxstring">"temp.txt"</span><span class="syntaxkeyword">).</span><span class="syntaxdefault">readlines<br />puts</span><span class="syntaxkeyword">(</span><span class="syntaxdefault">lines</span><span class="syntaxkeyword">)<br /></span><span class="syntaxdefault"> </span>

Garry K

Does this code work with Mac OS.
With windows the tempfile goes to desktop and gets discarded when finished.
Where does the file go for Mac OS and do we have rights?


      # do this for testing on a mac
      @@windows = false 

      # do this for testing on windows
      # @@windows = false 

      mac_addr = []
      cmd = @@windows ? 'ipconfig /all' ; 'ifconfig'

      # choose lines that have only six pairs of 2 char hex values 
      # separated by either a ; or -
      regex = Regexp.compile('(..[;-]){5}..')

      tempfile = "temp.txt"
      `#{cmd} > #{tempfile}`
      File.open(tempfile, 'r') do |file|
        lines = file.grep(regex)
        lines.each { |line| mac_addr << (line.strip[-17, 17]).upcase().gsub(/-/, ';') }
      end
      File.unlink(tempfile)

      # if windows and we have more than 1 mac address 
      # then use the second one otherwise use the first
      # if not windows then use the first address
      index = @@windows && mac_addr.length > 1 ? 1 ; 0
      @@mac_address = mac_addr[index]

Dan Rathbun

The temp file only goes to the desktop by chance that your current working directory is pointing at the desktop directory.

WIN = RUBY_PLATFORM !~ /darwin/i OSX =( not WIN ) desktop_dir = WIN ? "#{ENV['USERPROFILE']}/Desktop" : "~/Desktop"
Assuming that the name of the directory is not language localized, but it likely IS.

You should not ever assume some other script has not changed the working directory.

All older SketchUp versions attempted to set it to the user's home directory.
SketchUp 2014 (on my machine,) has left me in "#{ENV['SystemRoot']}/System32" (why I do not know, but have asked.)

To see what the current working directory is, use:
Dir::getwd
or, it's alias:
Dir::pwd

To temporarily change the working directory (and have it change back to whatever it was,) use the blockform of the Dir::chdir class method.

Dir;;chdir( RUBY_PLATFORM !~ /darwin/i ? "#{ENV['USERPROFILE']}/Desktop" ; "~/Desktop" ) {
      # do this for testing on a mac
      @@windows = false 

      # do this for testing on windows
      # @@windows = false 

      mac_addr = []
      cmd = @@windows ? 'ipconfig /all' ; 'ifconfig'

      # choose lines that have only six pairs of 2 char hex values 
      # separated by either a ; or -
      regex = Regexp.compile('(..[;-]){5}..')

      tempfile = "temp.txt"
      `#{cmd} > #{tempfile}`
      File.open(tempfile, 'r') do |file|
        lines = file.grep(regex)
        lines.each { |line| mac_addr << (line.strip[-17, 17]).upcase().gsub(/-/, ';') }
      end
      File.unlink(tempfile)

      # if windows and we have more than 1 mac address 
      # then use the second one otherwise use the first
      # if not windows then use the first address
      index = @@windows && mac_addr.length > 1 ? 1 ; 0
      @@mac_address = mac_addr[index]

} # chdir block

To test for access rights:
File::directory?( dirname ) && File::writable?( dirname )

See the File class for other class query methods to determine access info: executable?(), executable_real?(), readable?(), readable_real?(), writable_real?, etc.

Be aware that path strings with unicode characters will not work well under Ruby 1.8.x on PC. (Mac OSX does not have these problems.)

Garry K

Thanks Dan. I should have thought about the whole issue of current working directory. This has been true since the beginning of DOS.

I'm going to put a config folder in my own plugin folder. I can put the temp.txt file there. I can also use the folder to put user custom settings so that updates don't overwrite user settings.

Thanks

tt_su

@garry k said:

I'm going to put a config folder in my own plugin folder. I can put the temp.txt file there. I can also use the folder to put user custom settings so that updates don't overwrite user settings.

For SketchUp versions older than SU2014 that might cause problems if the user doesn't have full permissions to the Plugins folder since Windows locks down Program Files quite tight. Ruby will in many cases not have write access.

Garry K

@tt_su said:

For SketchUp versions older than SU2014 that might cause problems if the user doesn't have full permissions to the Plugins folder since Windows locks down Program Files quite tight. Ruby will in many cases not have write access.

OK - then what do you suggest. I will need to find a location to temporarily write a file. This will be for Windows and Mac.

I suppose I could use one strategy for SU 2014 and another for older versions.