sketchucation logo sketchucation
    • Login
    โ„น๏ธ Licensed Extensions | FredoBatch, ElevationProfile, FredoSketch, LayOps, MatSim and Pic2Shape will require license from Sept 1st More Info

    Re: [Plugin] Quick Lathe v1.2.0 31mar2013

    Scheduled Pinned Locked Moved Plugins
    58 Posts 23 Posters 59.3k Views 23 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • pilouP Offline
      pilou
      last edited by

      @unknownuser said:

      This can be done reversing the selected face(s)

      Tricky... but that oblige to reverse again the result for have a consistant volume ๐Ÿ˜„

      And as you have several volumes the orient face just work for ONE volume! ๐Ÿ˜ฎ

      So very, very tiedous when have thousand of volumes!!! ๐Ÿ’š

      Else very funny when the successive selection will be made! Some sinuous volumes will be made! โ˜€
      (in mode Geometry enable) And think to erase the internal faces! ๐Ÿค“
      Bravo for Trogluddite! ๐Ÿ˜Ž

      And it's a little pity that the axe must be coplanar and not with any orientation! ๐Ÿค“
      I don't see not very big differences on the calculation! ๐Ÿ˜’

      Happy easter Eggs! โ˜€
      tiedous.jpg
      tiedous1.jpg

      Frenchy Pilou
      Is beautiful that please without concept!
      My Little site :)

      1 Reply Last reply Reply Quote 0
      • kenK Offline
        ken
        last edited by

        Just a quick note. If the version number in the plugin forum is V1.1.1 than the version number in the rb file should be the same. The version number in the download is V1.1.0. This just makes it easier for multiple upgrades, one can be sure he is operating with the newest version.

        And this from a very grateful user of your plugin who is incapable of writing one line of code.

        Again thank you for this plugin. Since I model from ACAD/DXF files, I find this a very useful plugin.

        Ken

        Fight like your the third monkey on Noah's Ark gangway.

        1 Reply Last reply Reply Quote 0
        • T Offline
          Trogluddite
          last edited by

          v1.2.0 now available in the top post.
          New Stuff...

          • Negative angles now supported, so you don't need to keep reversing faces.
          • Faces don't need to be co-planar - though take care, it means the faces must be triangulated, so much more geometry!
          • Face orientation improved - 'inside out' forms should happen much less often.

          @unknownuser said:

          version number in the rb file should be the same.

          Oops, yes, that was a bit naughty. v1.1.1 was a bit of a rush job after I realised that I broke the previous upload by leaving in some de-bugging code.

          @Pilou
          Your funny shapes are very inspiring! May have to re-name the tool though - it's some funny kind of lathe that could do those shapes! ๐Ÿ˜‰

          This will probably be the last v1.x update - I'm now working on a whole new user interface to make the settings more visual and easier to work with, and enable a few of the other cool features that people have requested.
          Here's a little sneak preview of where I'm at so far...

          COMING SOON(ISH)!
          Features which will almost certainly be included...

          • Ability to select faces from other contexts (e.g. inside multiple groups/components)
          • Axis and angle setting by drawing them with inferences from other geometry.
          • On screen direction arrows and colour coding, so you can visualise the settings more easily.
          • Quick VCB input of values, and help/hints in the status bar.

          Dammit, this Ruby thing is addictive... ๐Ÿค“

          1 Reply Last reply Reply Quote 0
          • pilouP Offline
            pilou
            last edited by

            Very cool effort! ๐Ÿ‘
            Test as soon as possible! โ˜€

            Works fine except unexpected oriente face

            Missing automatic Updated Selection between new axis ๐Ÿ˜‰
            Must be not a "face" but a profil until the last end face!
            So result will be a real "solid"!

            Suggestion : run the script with only a list of axis in one pass

            tiedous2.jpg

            tiedous3.jpg

            Frenchy Pilou
            Is beautiful that please without concept!
            My Little site :)

            1 Reply Last reply Reply Quote 0
            • S Offline
              smicha
              last edited by

              Great plugin. Thanks a lot.

              I find it similar to TIG's "extrude edges by lathe" - I like both of them.

              My question is - is it possible to add an extra option to "follow me" around a square?

              1 Reply Last reply Reply Quote 0
              • charly2008C Offline
                charly2008
                last edited by

                Hi,

                again a great tool. Right now I have not any specific application but it is fun to experiment with it.


                1.png


                2.png


                3.png


                4.png


                5.png


                6.png


                7.png

                He who makes no mistakes, makes nothing

                1 Reply Last reply Reply Quote 0
                • T Offline
                  Trogluddite
                  last edited by

                  @unknownuser said:

                  Works fine except unexpected oriente face

                  Hmm, I'll have to have another look at that - seems that the shapes in Charly's pictures also show some 'inside out'.
                  First, I will check my 'testing' schematic - somehow the shapes I'm using are not showing this problem when I test, so I need to identify some definite problem ones.

                  'Face moving' should come soon - this will be part of a new feature I am making to allow holes in the faces - for making pipes etc.

                  @smicha said:

                  I find it similar to TIG's "extrude edges by lathe"

                  Aha, I wondered when someone would discover my 'inspiration' for my plugin! Indeed, TIG's tools are an indispensable part of my toolbox - in fact, used so often that I made this plugin just to save a few seconds every day doing curve selections...
                  ...and for some practice using Ruby - it will be a long time before I could ever get as good as TIG, ThomThom, Fredo, Dan etc., but I hope to extend this tool for many other types of automatic 'shape creation' eventually.

                  @charly2008 said:

                  but it is fun to experiment with it

                  Thanks - and apologies for those inside out sections; they really shouldn't be like that, as Pilou already spotted.

                  The reactions so far to my first proper 'geometry' Ruby has been amazing - that people can see so much to do with what began life as a tool for knobs and table legs really inspires me to see how far I can push the code...

                  ...but first, I really must get that 'inside out' problem dealt with once and for all!! ๐Ÿค“

                  1 Reply Last reply Reply Quote 0
                  • gillesG Offline
                    gilles
                    last edited by

                    Believe me this one will be a Ruby.

                    " c'est curieux chez les marins ce besoin de faire des phrases "

                    1 Reply Last reply Reply Quote 0
                    • pilouP Offline
                      pilou
                      last edited by

                      @unknownuser said:

                      I'm using are not showing this problem when I test, so I need to identify some definite problem ones.

                      About the oriente face selection (blue / White)
                      I believe it's just that the face's selection becomes Out/ In at each apply!
                      (look the Charly's image above)

                      Frenchy Pilou
                      Is beautiful that please without concept!
                      My Little site :)

                      1 Reply Last reply Reply Quote 0
                      • L Offline
                        lapx
                        last edited by

                        Is this tool ideal for this? Can it also be done with "Edge by Rail" ruby?


                        stone_towers_zaha_hadid_architects_cairo-2.jpg

                        1 Reply Last reply Reply Quote 0
                        • pilouP Offline
                          pilou
                          last edited by

                          Extrude Edges by Rail by Tig ?

                          Extrude Edges by Rail works with 2, 3, or 4 curves maxi and has not the same concept!

                          And can't have a closed profile!

                          here 2 curves, blue is the profile, Violet is the rail

                          quickla.jpg

                          Must be like this for have similar than a lathe ๐Ÿ˜‰

                          quickla1.jpg

                          @unknownuser said:

                          Is this tool ideal for this? Can it also be done with "Edge by Rail" ruby?

                          All can be make that but will be not easy with the Extrude by Rails ๐Ÿ˜‰

                          Frenchy Pilou
                          Is beautiful that please without concept!
                          My Little site :)

                          1 Reply Last reply Reply Quote 0
                          • pilouP Offline
                            pilou
                            last edited by

                            Very funny! ๐Ÿ˜Ž

                            You can select the face after the fonction and Scale or move it(with Alt)! ๐Ÿ’ญ

                            quicklathe1e.jpg

                            here Color by Slope by Chris Fullmer
                            quicklathe.jpg

                            Frenchy Pilou
                            Is beautiful that please without concept!
                            My Little site :)

                            1 Reply Last reply Reply Quote 0
                            • T Offline
                              Trogluddite
                              last edited by

                              @unknownuser said:

                              You can select the face after the fonction and Scale or move it(with Alt)!

                              He he! ๐Ÿ˜ฒ
                              Wow, Pilou, you discovered a function that I didn't even know was there!
                              ๐Ÿ˜

                              This is a side effect of the "keep the hoops intact" function - if you show hidden edges, and try selecting once of the "ribs", you will see that they are all 'welded' - proper arc's with centre and radius.
                              For a 360deg turned shape (e.g. chair leg), you can use this to play with the diameters of the hoops for easy re-shaping...

                              ...but it never occurred to me that it would do this "tapering" effect, I had never even tested it to see what scale would do for an 'extrusion'.

                              I must, of course, now check all the new code I'm working on for the next version - to make sure that I haven't broken this, because those shapes you're making are great!

                              Hopefully will have the next update ready in a week or two - learning to make a decent GUI has been harder than the geometry, and more lines of code too!!
                              I already have several of your suggestions working. For 'loose geometry' it will work much more like an 'arc push/pull', with no internal faces, and respecting the soft/smooth of the geometry that it joins on to - and with the 'pushed' face selected for easy 'follow on'.

                              1 Reply Last reply Reply Quote 0
                              • X Offline
                                xEme77
                                last edited by

                                a GREAT rbz

                                1 Reply Last reply Reply Quote 0
                                • S Offline
                                  SpookyChick1013
                                  last edited by

                                  Apparently I'm missing something here. How do you install a .rbz when there is no "install" option in your plugins menu? I'd very much like to use QuickLathe, but there seems to be no way to install it on my system. WinXP, SU7.1

                                  https://kuromatsudriveyards.com

                                  Fo-su to tomo ni aran koto o...

                                  1 Reply Last reply Reply Quote 0
                                  • BoxB Offline
                                    Box
                                    last edited by

                                    You can change the file extension from .rbz to .zip then extract the contents and install in the usual way.

                                    1 Reply Last reply Reply Quote 0
                                    • Dave RD Offline
                                      Dave R
                                      last edited by

                                      @spookychick1013 said:

                                      Apparently I'm missing something here. How do you install a .rbz when there is no "install" option in your plugins menu? I'd very much like to use QuickLathe, but there seems to be no way to install it on my system. WinXP, SU7.1

                                      You could update to SU8 and then you'd be able to install the RBZ file normally, too.

                                      Etaoin Shrdlu

                                      %

                                      (THERE'S NO PLACE LIKE)

                                      G28 X0.0 Y0.0 Z0.0

                                      M30

                                      %

                                      1 Reply Last reply Reply Quote 0
                                      • mitcorbM Offline
                                        mitcorb
                                        last edited by

                                        In case it is unclear how to rename the file, look at this procedure:
                                        http://www.mediacollege.com/microsoft/windows/extension-change.html

                                        Keep in mind that the author may not have tested his script in earlier versions. Whether he did or did not would be nice to have this spelled out. So, proceed with caution, even though maybe nothing will happen, and the worst case may be that you will just need to uninstall.

                                        I take the slow, deliberate approach in my aimless wandering.

                                        1 Reply Last reply Reply Quote 0
                                        • Dave RD Offline
                                          Dave R
                                          last edited by

                                          What's not to like? And you can keep 7.1 if you want even with 8 installed.

                                          Etaoin Shrdlu

                                          %

                                          (THERE'S NO PLACE LIKE)

                                          G28 X0.0 Y0.0 Z0.0

                                          M30

                                          %

                                          1 Reply Last reply Reply Quote 0
                                          • S Offline
                                            SpookyChick1013
                                            last edited by

                                            Wow, Thank you, gentlemen. Quicker replies than I expected.

                                            @ Box: That was my first instinct, but I guess I psyched myself out and decided it couldn't be that simple, so I didn't even think to try.

                                            @Dave R: Yeah, I suppose I could do that. Except that I didn't just plain didn't like SU8 when it came out.

                                            Anyway, thanks, both of you.

                                            Edit: Thanks Mitcorb. Looks like we cross-posted there. I'll report back on whether it works with 7.1

                                            Just to clarify; I may finally switch over to SU 8 when I finally get the new machine I've been trying to get for over a year. Right now, this thing is a delicate balance in order to even keep the machine running, and it's not worth it to muck about with SU 8 when I'm sooner or later going to be redoing everything anyway.

                                            Thanks, all

                                            https://kuromatsudriveyards.com

                                            Fo-su to tomo ni aran koto o...

                                            1 Reply Last reply Reply Quote 0
                                            • 1
                                            • 2
                                            • 3
                                            • 2 / 3
                                            • First post
                                              Last post
                                            Buy SketchPlus
                                            Buy SUbD
                                            Buy WrapR
                                            Buy eBook
                                            Buy Modelur
                                            Buy Vertex Tools
                                            Buy SketchCuisine
                                            Buy FormFonts

                                            Advertisement