This is some of my works
-
hybrid diesel-electro truck GOLIATH-ED
-
chopper concept
-
Very refreshings models!
-
thanks
-
-
hotroad buggy (alot of small details)
-
LED Lamp "Flower Power", the lamp not only change the brightness but also hide behind the petals ... lamp equipped with a clock, alarm and has 3 modes:
- Manual (adjust themselves what light you need and enable, disable) manipulations performed by touching the touch-mound at the base of the lamp,
- automatic time (ask what time the lamp is switched on and off in what, as well as the intensity of light) button on the left of the clock
- Automatic on sensitivity (the base is a light sensor, if the lamp goes dark, the darker the brighter the lamp lights and acc. vice-versa) button on the left of the clock
-
BLUESKY chopper
-
Here are a couple of robot (complete sets of furniture, "Hills" was made of 10 pieces, after the crisis ceased to be ordered, as expensive in production)
Roulette "WilderWestern"(to make when he was the height of the gambling business in Ukraine for a chain of casinos, only 5 tables were produced
-
LED Park Lamp "Lily"
completely autonomous because powered by solar elements, the body is made of fiberglass, painted in green color is not obtrusive than it does not emit light from the composition of the park, ceiling made of reinforced plastic, inside a LED elements
Rod with a metal frame. Lamp height (an element) 3,5 m and 1,1 m. rod removal Destination: lighting fittings, sidewalks, pedestrian zones.
-
"Jerboa"
the vehicle for movement on Mars
-
very cool "vehicle for movement on mars"
-
Jerrycans? What fuel does that Mars vehicle use?
Seriously, interesting concept. Looks like you have paid more attention to curved parts - they look quite segmented on your previous models. -
in cans no fuel (fuel - nuclear generator) in their water! Something without which it simply can not survive on Mars (and elsewhere)
-
The rover "TUSHKAN"
Fuel: in the back of the rover is electric generator at a nuclear fuel, the rotation of the wheels is a chain mechanism with independent motors.
Type the passengers: the rover descends to a height of 50 cm between the hull and the surface of B, then the door gets up and moves forward allowing access to passengers and the driver to board the transport "A".
Features: transport has 4 legs (each of which can be operated independently, which allows him to overcome even the steepest mountain surface) radius of the variability of foot 80 degrees "C". Wheels with tires of low pressure for maximum grip with the ground, equipped with spiked steel inserts. Changing the wheels is made in 3 steps: prepare a spare tire and lift the injured leg of transport, unhook the damaged wheel (turning off the hydraulic lock in the mechanism near the wheels), insert a spare tire in the grooves and re-enable the hydraulic clamps (mounting), thereby fixing the wheel. The wheels have ball bearings at the bottom of the foot, which adds increased maneuverability.
Transportation is also equipped with two 40 liter jerry cans with water (so to speak NC)
Designed for movement on the surface of Mars during its colonization (or rather for the mountain and crater surfaces), requires the presence of gravity)). Used as a scout the territory.
-
Aaah..water jerrycans. Hope they´re properly insulated
Very imaginative work! -
thanks
-
Nice concepts you got there...keep it up..
-
a couple of my works
toy cars
-
moonwalker for tourists "crater Turtle"
panoramic roof and sides - for better viewing
Advertisement