? [Question] - A Ruby Calculator ?

Gruff

Turns out I don't need much persuading.

Attached is an Windows equation editor I slapped together.
It pumps the value into Sketchup via keyboard strokes.
Unzip and run the 'Setup.exe'. Create a shortcut to your Desktop.

It is setup to be a 'Top Most' window so it should float over SU.
It can handle a number of math functions and has a history dropdown. Values from history will be pasted into the equation when selected.

To use make sure your Measurement tool bar is ready to accept a value.
Press <ENTER> Once to resolve the equation. Press <ENTER> again to send the value to SU.

If you have problems running the calculator check the following.

Make sure the tools|options|Target Application is set for '- SketchUp'
Set the number of decimal places to 3. (Not sure why that affects things.) (Also under the tools menu.)

Let me know how it goes.

Windows Calculator for SU

Chris Fullmer

Excellent Gruff

What language is it that you code in?

Chris

xrok1

thats just awsome, thankyou! now you could pretty it up a bit

xrok1

oops! draw a line type 22*2 (or any equation) enter enter runtime error 5 invalid....

Gruff

Chris:
This one was coded in VB6. I find it best for quick development.
If you want to look at the Source code I could post it for you.

Rather than write my own equation parser I made use of the MS Scripting Control to evaluate text expressions. While this supports a wide range of functionality it also opens the door to user input errors. It is extensible. In fact for this implementation I swapped out the Trig functions so that they work with Decimal Degrees instead of Radians. i.e. SIN(30) = 0.50

This means conversion functions as the original poster asked about could be added fairly easily.
I suppose I could write it such that it imports a text file that contains user defined conversion procedures. (Of course they would have to be written in VBScript.)

This brings up a possiblity that this might be written as a Web form.
As I see it the only missing elements for you would be the VB Sendkeys() command and some way of setting the focus to SU while Sendkeys does the job. Hey! I believe there is a Win32API equivalent.
I'll root around for it.

xrok1:
The App was compiled under WinXP. I suspect you are using some other OS.
This might also account for how it looks on your system.

Run-Time Error 5 (Invalid Procedure Call or Argument) can be attributed to an out of range floating point error or more likely an incompatible OS.

Just downloaded the zip from the forum and installed it on my other WinXP box.
Runs fine here.

As far as how it looks. Could you post a screen shot? I was concerned about size so I made it as compact as possible.

Gruff

Hmmm there is a User32.dll sendkeys function but why not use ruby entirely.

I tried this code but it fails on the: require 'win32ole'
I downloaded and installed full ruby but it doesn't seem to make a difference.

Perhaps you can get this to work?


require 'Sketchup'
require 'win32ole'
#---

def drive_vcb  
  wsh = WIN32OLE.new('Wscript.Shell')

  # Do not know if we need to put the focus on SU since we are in SU.
  if wsh.AppActivate('- SketchUp')
    sleep(1)

    # Push Test keystrokes into SU
    wsh.SendKeys('100.00{ENTER}')

  end
end
if( not file_loaded?("test_me.rb") )
    add_separator_to_menu("Draw")    
    UI.menu("Draw").add_item($exStrings.GetString("test_me")) { drive_vcb }
end
#---

file_loaded("test_me.rb")

a4chitect

perhaps this thread might help
http://forums.sketchucation.com/viewtopic.php?f=180&t=21281

put the attached file into plugins folder, no more load errors

win32ole.zip

this script sends "20" into sketchup - when vcb is active - this gets put in

Gruff

A4chitect:
Thanks! It works on my PC now as well.

Chris:
There you go. You can write a calculator with a Web page front end that uses code like that in 'test_me.rb' to drive the VCB. That would be a better solution as it would be native to SketchUp for Windows. Much much better than my Compiled app.

ktkoh

This looks like a great tool for me as I need a calculator quite often. The way it seems to work best for me is.

Put the formula in the calculator and press enter once.
Back in SU select the tool ie Move and the handle point then click on the TG Cal and return the mouse to show the move direction and then press Enter.

Thanks
Keith

xrok1

running windows7 here.

Gruff

Ah! that would be the problem then. Definite version issue.
Since I do not have Windows7 I cannot say that it will ever work for you.

Are there modifications you can do to get it to run as though it were launched from WinXP? XP has tools to run older OS products through it's shortcut options.

Looks nice though.

xrok1

tried it in XP compatibility mode. still crashed,

xrok1

arrrrg!

Gruff

Tell you what xrok1,

Here is a small Ruby script Calculator that binds to the Tools menu.
Bind it to a shortcut key and your in business.

[Edit]
See the attached zip file two posts down...
[/Edit]

JClements

Thanks, Gruff!

Jim

A minor thing - require 'Sketchup' causes sketchup.rb to load a second time. Loading sketchup.rb again doesn't really break anything, but it does create a duplicate Ruby Console entry in the Window menu.

It should be - require 'sketchup' (small s)

Gruff

You are really having a bad day, Huh. Sorry for any confusion.

Attached is a zip file that contains both ruby_calc.rb and win32old.so.

Unzip and place them both in your plugins folder under sketchup.

I found it handy to bind the menu 'Tool/Ruby Calc' to a shortcut key. (I use Alt+Q)

This calculator doesn't have a history, but it will take any Ruby formatted Math equation and use it to drive the VCB.

Latest Ruby_Calc. (This is not TG_Calc)

Gruff

Thanks for the advice Jim.

I updated the Ruby_Calc Zip attachment with your change. For any who get this far there are two calculators in this thread.

TG_Calc.exe which is a Compiled Windows program. It has a number of features.
Ruby_Calc.rb which is just a simple calc with no features.

Both only work with Windows and require the win32ole.so file.
both work by pumping keystrokes into the SU environment.

JClements

I thought this worked. I tried the zip file contents in both SU2013 and SU2014.
I also tried installing via the SketchUcation Plugin Store.

ruby_calc load error.JPG

TIG

The script hasn't got require 'langhandler'
Add that after the require 'sketchup'
If an earlier loading script has already required it it might mask the lack of it.
However the line:
UI.menu("Tools").add_item($exStrings.GetString("Ruby Calc")) { rubycalc }
will also fail if $exStrings is undefined as it loads - as that might get setup by another script too.
Frankly I'd forget about the langhandler completely, and change it to read:
UI.menu("Tools").add_item("Ruby Calc"){rubycalc}