WebDialog encoding bug found!

driven

In Windows 7 p(params) returns non utf-8
"lid1,\xC3\xA9lan"..

ON mac p(params)
"lid1,\xE2\x88\x9A\xC2\xA9lan"

why?

slbaumgartner

@juantxo said:

In Windows 7 p(params) returns non utf-8
"lid1,\xC3\xA9lan"..

ON mac p(params)
"lid1,\xE2\x88\x9A\xC2\xA9lan"

why?

We are seeing the raw 8-bit byte sequences of the string representations and the chaos that results when Ruby and SU try to convert character encodings without knowing for sure what they had.

Aerilius

I didn't know the ASCII-8BIT encoding issue before, but it's only the cherry on the cake.

Along with the issues we have found in the other webdialog discussions (url encoding, url length limit, dropped backslashes), I recommend not to transfer user input or arbitrary text through action callbacks, only simple method names/indentifiers with a limited character range. Then one can use get_element_value to fetch user input of any arbitrary character range.

driven

@aerilius said:

...Then one can use get_element_value to fetch user input of any arbitrary character range.

except, get_element_value fails pre v2013 and get_element_value works.

I got a few old scripts I was trying to update, and was unable to figure out the issue...

I think this shows it was broken to begin and got broken 'differently' with a fix...

I'm more inclined, to look at using 'unicodeEscape' in the js... before retrieving by either method...

john

slbaumgartner

@driven said:

@aerilius said:

...Then one can use get_element_value to fetch user input of any arbitrary character range.

except, get_element_value fails pre v2013 and get_element_value works.

I got a few old scripts I was trying to update, and was unable to figure out the issue...

I think this shows it was broken to begin and got broken 'differently' with a fix...

I'm more inclined, to look at using 'unicodeEscape' in the js... before retrieving by either method...

john

It's possible to get deeply confused trying to sort this out
Here's what I have observed:

The UTF-8 byte sequence for élan is \xC3\xA9lan (that is, UTF-8 encodes é as the two-byte sequence \xC3\xA9).

On Mac, get_element_value returns this byte sequence exactly in both SU8 and 2014. However, because Ruby 8 thinks it is a 5-character string in ASCII-8BIT, it treats \xC3 as Ã and \xA9 as , the extended ASCII interpretations of these bytes. Ruby 2.0 happily assumes it is UTF-8 and gets it correct.

The action callback parameters are handled differently and inconsistently between Windows and Mac.

On the Mac, in SU8 the action callback also returns the original UTF-8 5-byte sequence, but somehow when Ruby prints it as a string, it gets it right Further, it believes this string and the one from get_element_value (that prints as Ãlan) are equal. This makes no sense to me...

But in 2014, the original 5-byte UTF-8 string is somehow transmuted into the 8-byte string \xE2\x88\x9A\xC2\xA9lan. Note that \xE2\x88\x9A is the UTF-8 for the square-root sign √ and \xC2\xA9 is UTF-8 for . So it appears the translation of the copyright is an attempt to handle misreading of the UTF-8 as ASCII-8BIT, but I don't know where that square root sign byte-sequence came from since as I mentioned above, \xC3 is Ã in ASCII-8BIT, which is \xC3\x83 in UTF-8. It's as if the callback processing code has an incorrect implementation of the transcoding.

And then, as juantx0 reports, SU8 on Windows 7 returns the 5 UTF-8 bytes unconverted yet again somehow manages to make sense of it in both cases .

driven

@slbaumgartner said:

... Further, it believes this string and the one from get_element_value (that prints as Ãlan) are equal. This makes no sense to me...

I create this confusion... I don't check for equality it's a 'puts', it should be

    @dlg2.execute_script("translation3.textContent='#{param_val}' + ' == ' + '#{elm_val}' + ' is ' + '#{param_val == elm_val}'")

which returns
√©lan == élan is false

sorry I'll get my coat...

john

Juantxo

Sorry, I didn't update my profile.
In Windows SketchUp 2013 p(params) returns
"lid1,élan"
so works fine. (I think in SU8 also)
Problem is in Windows SU2014 that returns non utf string.

driven

@juantxo said:

Sorry, I didn't update my profile.

I suspected that...

which locale do you use Sketchup.get_locale en-US?, it may have a bearing?

john

Juantxo

Yes, en-Us.

slbaumgartner

@driven said:

@slbaumgartner said:

... Further, it believes this string and the one from get_element_value (that prints as Ãlan) are equal. This makes no sense to me...

I create this confusion... I don't check for equality it's a 'puts', it should be

    @dlg2.execute_script("translation3.textContent='#{param_val}' + ' == ' + '#{elm_val}' + ' is ' + '#{param_val == elm_val}'")
>

which returns
√©lan == élan is false

sorry I'll get my coat...

john

Nah, I should know enough to check your code . With a real test, equality fails in all cases (as it should!).

driven

@slbaumgartner said:

Nah, I should know enough to check your code :oops: . With a real test, equality fails in all cases (as it should!).

it's the tangents that count...

now you can write a proper test...

john

Dan Rathbun

The text that displays in your test, says UFT-8 in many places. It is UTF-8.
(The word format is at the end, of Unicode Transformation Format.)

(nag, nag)

Dan Rathbun

@slbaumgartner said:

But in 2014, the original 5-byte UTF-8 string is somehow transmuted into the 8-byte string \xE2\x88\x9A\xC2\xA9lan. ... It's as if the callback processing code has an incorrect implementation of the transcoding.

YES, agree.

To me it looks like it IS UTF-8, but Ruby thinks it is some other encoding, and doubly transcodes* it into UTF-8 AGAIN.

P.S. - isn't transmute a math term ?

tt_su

@driven said:

except, get_element_value fails pre v2013 and get_element_value works.

? It does? Are you sure?

tt_su

@dan rathbun said:

To me it looks like it IS UTF-8, but Ruby thinks it is some other encoding, and doubly transcodes* it into UTF-8 AGAIN.

That's a similar problem we have with FILE $LOAD_PATH, $LOADED_FEATURES and ENV. UTF-8 byte sequences isn't labeled with the correct encoding.

slbaumgartner

@dan rathbun said:

@slbaumgartner said:

But in 2014, the original 5-byte UTF-8 string is somehow transmuted into the 8-byte string \xE2\x88\x9A\xC2\xA9lan. ... It's as if the callback processing code has an incorrect implementation of the transcoding.

YES, agree.

To me it looks like it IS UTF-8, but Ruby thinks it is some other encoding, and doubly transcodes* it into UTF-8 AGAIN.

P.S. - isn't transmute a math term ?

I was thinking more of alchemy

driven

@tt_su said:

? It does? Are you sure?

It certainly looks like it...

I cleaned up my initial code an per the Nanny and the Professors prodding...

and these are the new images... v13 v14
and the new script

# encoding; UTF-8
def show_problem

  @lang_hash = {'lid1'=>"élan"}  # I'm using a hash because it's what I use in my plugin...

  @dlg2 = UI;;WebDialog.new("Problem_Main", false,"main_prob", 700, 500, 600, 0, false)


  html = %Q(
  <!DOCTYPE html>
  <html>
  <head>
  <title>Problem_Main</title>
  <meta content="text/html; charset=utf-8" http-equiv="Content-Type">
  </head>
  <body>
    <p>Tested using Sketchup.version #{Sketchup.version}</p>

    <p>Tested on #{RUBY_PLATFORM =~ /(darwin)/ ? ((%x(sw_vers).sub(/ProductName;/,'').sub(/ProductVersion;/,'').sub(/BuildVersion;/,'_'))) ; 'windows'}</p>

    <p>click into the box and hit return or change to use another non ASCII-8BIT string...</p>

    <input id="#{@lang_hash.keys[0]}" value="#{@lang_hash.values[0]}" type="text" onkeydown="if (event.keyCode == 13) trans_L8();" title="type text and then 'Enter'">

    <p>below is the return using 'get_element_value'</p>

    <h4 id="translation1"><!-- return appears here --></h4>

    <p>below is the return using 'add_action_callback' </p>

    <h4 id="translation2"><!-- return appears here --></h4>

    <p>below is the return of the query  'add_action_callback'  == 'get_element_value'</p>

    <h4 id="translation3"><!-- return appears here --></h4>

    <script type="text/javascript" charset="UTF-8">

      function trans_L8() {

        window.location = 'skp;trans_L8@'+#{@lang_hash.keys[0]}.id+','+(#{@lang_hash.keys[0]}.value);
      }

    </script>
  </body>
</html>
)

  @dlg2.set_html html

  RUBY_PLATFORM =~ /(darwin)/ ? @dlg2.show_modal() ; @dlg2.show()

  @dlg2.add_action_callback("trans_L8") {|dialog, params|

    param_id = params.split(',')[0].to_s
    param_val = params.split(',')[1].to_s

    callback = 'return using add_action_callback ' # + param_id.to_s + ' = ' + param_val.to_s # commented out to avoid the error
    puts callback
    p(params)

    elm_val = (@dlg2.get_element_value(param_id)).to_s
    element_value = 'return using get_element_value => ' + elm_val
    puts element_value

    @dlg2.execute_script("translation1.textContent='#{(elm_val)}'")

    @dlg2.execute_script("translation2.textContent='#{param_val}'")

    @dlg2.execute_script("translation3.textContent='#{elm_val == param_val}'")
}
end
show_problem

# load("/Users/johns_iMac/Library/Application Support/SketchUp 2014/SketchUp/Plugins/jcb_ViewPortResize/dev/show_encoding_issue.rb")
# load("[add your path]/show_encoding_issue.rb")

and a question? Is there code to get the Windows operating system details?

john

driven

a CLUE perhaps...

Using js codepoints for my input, 'get_element_value' has switched all the separators...

return using add_action_callback "lid1,/uD83D/uDC7D/u20AC/u00A3/u0061/u0009"
return using get_element_value => \uD83D\uDC7D\u20AC\u00A3\u0061\u0009

so I modified my code

  @dlg2.add_action_callback("trans_L8") {|dialog, params|

    param_id = params.split(',')[0].to_s
    param_val = params.split(',')[1].to_s
    param_val_sub = params.split(',')[1].gsub('/','\\').to_s
p param_val_sub
    callback = 'return using add_action_callback ' # + param_id.to_s + ' = ' + param_val.to_s # commented out to avoid the error
    puts callback
    p(params)

    elm_val = (@dlg2.get_element_value(param_id)).to_s
    element_value = 'return using get_element_value => ' + elm_val
    puts element_value

    @dlg2.execute_script("translation1.textContent='#{elm_val}'")

    @dlg2.execute_script("translation2.textContent='#{param_val}'")

    @dlg2.execute_script("translation3.textContent='#{param_val_sub}'")
}

and this is the result
using js codepoints
john

driven

So it seems there are in-fact two issues...

1: return having separators reversed

2: encoding being mis-read

I added the .gsub('/','\\') to both types of return, so it works on v8 or v13/v14

I added js to convert the string to UNICODE on keydown, before it retrieved by SU...

and the full workaround... v8 fixed get_element_value and encoding v14 fixed action_callback and encoding

# encoding; UTF-8
def show_problem

  @lang_hash = {'lid1'=> %Q(élan  ümlet)}  # I'm using a hash because it's what I use in my plugin...

  @dlg2 = UI;;WebDialog.new("Problem_Main", false,"main_prob", 700, 500, 600, 0, false)


  html = %Q(
  <!DOCTYPE html>
  <html>
  <head>
  <title>Problem_Main</title>
  <meta content="text/html; charset=utf-8" http-equiv="Content-Type">
  </head>
  <body>
    <p>Tested using Sketchup.version #{Sketchup.version}</p>

    <p>Tested on #{RUBY_PLATFORM =~ /(darwin)/ ? ((%x(sw_vers).sub(/ProductName;/,'').sub(/ProductVersion;/,'').sub(/BuildVersion;/,'_'))) ; 'windows'}</p>

    <p>click into the box and hit return or change to use another non ASCII-8BIT string...</p>

    <input id="#{@lang_hash.keys[0]}" value="#{@lang_hash.values[0]}" type="text" onkeydown=" if (event.keyCode == 13) this.value=unicodeLiteral(this.value);trans_L8();"  title="type text and then 'Enter'">

    <p>below is the return using 'get_element_value'</p>

    <h4 id="translation1"><!-- return appears here --></h4>

    <p>below is the return using 'add_action_callback' </p>

    <h4 id="translation2"><!-- return appears here --></h4>


    <h4 id="translation3"><!-- return appears here --></h4>

    <script type="text/javascript" charset="UTF-8">

      function trans_L8() {

        window.location = 'skp;trans_L8@'+#{@lang_hash.keys[0]}.id+','+(#{@lang_hash.keys[0]}.value);
      }

      /* Creates a uppercase hex number with at least length digits from a given number */
function fixedHex(number, length){
    var str = number.toString(16).toUpperCase();
    while(str.length < length)
        str = "0" + str;
    return str;
}

      /* Creates a unicode literal based on the string */
function unicodeLiteral(str){
    var i;
    var result = "";
    for( i = 0; i < str.length; ++i){
        /* You should probably replace this by an isASCII test */
        if(str.charCodeAt(i) > 126 || str.charCodeAt(i) < 32)
            result += "\\\\" + "u" + fixedHex(str.charCodeAt(i),4);
        else
            result += str[i];
    }

    return result;
}

    </script>
  </body>
</html>
)

  @dlg2.set_html html

  RUBY_PLATFORM =~ /(darwin)/ ? @dlg2.show_modal() ; @dlg2.show()

  @dlg2.add_action_callback("trans_L8") {|dialog, params|

    param_id = params.split(',')[0].to_s
    param_val = params.split(',')[1].gsub('/',"\\").to_s
    callback = 'return using add_action_callback ' # + param_id.to_s + ' = ' + param_val.to_s # commented out to avoid the error
    puts callback
    p(params)

    elm_val = (@dlg2.get_element_value(param_id)).gsub('/',"\\").to_s
    element_value = 'return using get_element_value => ' + elm_val
    puts element_value

    @dlg2.execute_script("translation1.textContent='#{elm_val}'")

    @dlg2.execute_script("translation2.textContent='#{param_val}'")

}
end
show_problem

# load("/Users/johns_iMac/Library/Application Support/SketchUp 2014/SketchUp/Plugins/jcb_ViewPortResize/dev/show_encoding_issue.rb")
# load("[add your path]/show_encoding_issue.rb")

BIG question is will this work on other PC's, or would I need a platform conditional?

In review,
I think the http header has the incorrect encoding and as SU is the server it must come from there...
The internal 'separator' variations is still a mystery...

john

Dan Rathbun

@driven said:

... and a question? Is there code to get the Windows operating system details?

Get the default system Encoding:
Encoding::find("filesystem")
or
Encoding::find("locale")

(On my machine it returns the #<Encoding:Windows-1252> object reference.)

If you want the Windows version:
%x[ver]

On my machine it returns: "Microsoft Windows [Version 6.1.7601]"
XP is 5.1
Vista is 6.0
Win7 is 6.1

What else do you want to know ?