I invite for acquaintance with Russian plug-in

[yad2000]

Who shares the standards DIN / EN / ISO / API / ASTM / ASME?
For further development of the plugin. Interest standards for all items, not just on the tube. At least to start with 2 pcs. You can share the standard is not complete, but only the image and style options.

Google Translator gives terrible translations)))

In Russia, the translation is: "Your - my not understand"))))

[ken]

Hello

I have tried and tried to get this program to work. I keep getting the attached error. I have the file, iconv.so in the correct directory as shown.

So what is wrong, and can it be fixed? I deal with pipes diagrams and would like for this to work.

So thanks in advance for your help.

Ken

---

[driven]

@unknownuser said:

Hello

I have tried and tried to get this program to work. I keep getting the attached error. I have the file, iconv.so in the correct directory as shown.

So what is wrong, and can it be fixed? I deal with pipes diagrams and would like for this to work.

So thanks in advance for your help.

Ken

Start.rb is not finding iconv.so is what your message says, and it needs it so it reports an error....

I'm on mac, but it looks like you need to put the missing file into your plugins folder >>> iconv.so

john

[Frederik]

Looks like a very interesting plugin...
Unfortunately I seem to share the same issue as Ken...
I've never had any issue installing a plugin - before now...
I even tried to copy the iconv.so to the plugins folder, but to no avail...

---

---

---

[Frederik]

OK... Tried to see if I could see something in the coolpipe_Start.rb
(yep - it's dangerous when having a very limited knowledge when it comes to coding... )

The original code looked like this:

#encoding; utf-8
##################################################################################################
##################################################################################################
# Cool Pipe Engine 2011-2012
# Cool Pipe Engine 2011-2012 to the SketchUp interface
# version 1.2
# Software Author;     Borisov Denis Vladimirovich (yad2000@rambler.ru)
# Design;              Borisov Denis Vladimirovich (yad2000@rambler.ru)
# ©2012 by Borisov Denis Vladimirovich (yad2000@rambler.ru)
#История версий
#-v1.2.1
#-Мультиязычность проекта (русский,английский,французский,итальянский,испанский,немецкий), возможность выбора языка в процессе работы с плагином
#-Расчет массы отвода (стального), расчитыватеся по геометрическим параметрам (может не соответствовать с заводским изделиям)
#-Структура кода измененена; отсутствует изменение стандартных классов, весь код объединен в классы и модули
#-внесено исправление по загрузке iconv.so; на MAC не загружать, только на Windows
#-редактирование элементов вынесено за пределы Observer при выделении на отдельную командную кнопку
#-исправлен принцип сортировки элементов спецификации на стандартный .sort (для избежания утечки памяти в процессе подсчета и зависаний SketchUP)

#-v1.2
#-Изменение структуры работы с базой данных элементов
#-Рисование и редактирование трубопроводов
#-Рисование и редактирование отводов
#-Рисование и редактирование переходов
#-Рисование и редактирование тройников
#-Рисование заглушек
#-Рисование фланцев
#-Создание спецификации
#-Функция копирования свойств (слой+материал) для объектов CoolPipe и групп
#v1.1
#-Следующие публикации по адресу; http://coolpipe.ru/load
#-Кардинально изменен дизайн диалога с пользователем
#-Дополнена база ГОСТов трубопроводов
#-Рисование трубопроводов мышью
#-Накладывание слоев, собственный редактор "быстрых" слоев
#-Накладывание материалов (боевая раскраска трубопроводов)
#-Накладывание теплоизоляции + редактор стандартных толщин изоляции
#-Функция "Прилепить отвод"
#-Функции редактирования трубопроводов (задание уклона или отметок трубопровода)
#-Функции редактирования отводов при выделении самих отводов мышью (экранное меню)
#-Функция "Составление спецификации"
#--разработка прервана 
#v1.0
#Пробный плагин (в виде тулбара) рисующий трубы, отводы, переходы, тройники, заглушки, фланцы по известным ГОСТам
#Первая публикация по адресу; http://forum.abok.ru/index.php?&showtopic=30806&st=160
##################################################################################################
##################################################################################################
require 'sketchup.rb'
require 'CoolPipe/cp_Lang.rb'
require 'CoolPipe/Service_proc.rb'
require 'CoolPipe/PipeTool.rb'
require 'CoolPipe/ElbowTool.rb'
require 'CoolPipe/ReducerTool.rb'
require 'CoolPipe/TeeTool.rb'
require 'CoolPipe/CapTool.rb'
require 'CoolPipe/FlangeTool.rb'
require 'CoolPipe/cpCSVBase.rb'
require 'CoolPipe/CopyOptionsTool.rb'

pform = (Object;;RUBY_PLATFORM =~ /mswin/i) ? ;windows ; ((Object;;RUBY_PLATFORM =~ /darwin/i) ? ;mac ; ;other)
platform = pform.to_s
if platform == "windows"
  require 'CoolPipe/iconv.so' #  применяем iconv
elsif platform == "mac"
   #  не применяем
end
CoolPipe_number_version = "1.2.1" # Текущая версия плагина
##################################################################################################
coolpipe_plugin = CoolPipePluginApp.new
coolpipe_plugin.run

So I deleted the two spaces in line 62 in front of "require"

if platform == "windows"
require 'CoolPipe/iconv.so' #  применяем iconv

Now I get this Load Error message:

---

[yorik1984]

Copy iconv.co to C:\Windows\system32

[Dan Rathbun]

@yorik1984 said:

Copy iconv.so to C:\Windows\system32

NO.. DO NOT !

It does not belong in the OS system directory !

[yorik1984]

if platform == "windows"
  require 'CoolPipe/iconv.so' #  применяем iconv
elsif platform == "mac"
   #  не применяем
end

Frederik has WINDOWS!

[driven]

@yorik1984 said:

Frederik has WINDOWS!

and Dan is saying "DON'T" move the file into the C:\Windows\system32 system path, it won't be found and doesn't belong there...

@ Fredrick if you suspect the require is not working test it in 'Ruby Console'. e.g.

pform = (Object;;RUBY_PLATFORM =~ /mswin/i) ? ;windows ; ((Object;;RUBY_PLATFORM =~ /darwin/i) ? ;mac ; ;other)
platform = pform.to_s

should return windows
then try

if platform == "windows"
  require 'CoolPipe/iconv.so' #  применяем iconv
elsif platform == "mac"
   #  не применяем
end

should return true
if it does it's not the problem, if it doesn't, check permissions on that file... 'CoolPipe/iconv.so' in that Directory, don't move it...
john

[Frederik]

Thanks for the heads up...
Much appreciated...

I don't dare to copy any files into the C:\Windows\System32 folder...
It seem strange that I would need to copy a file to a OS system folder...

From the videos this plugin looks very interesting...
I'm working as Project Manager and my job is to make 2D and 3D drawings, mechanical design, building design, surface calculation, volume calculation, walk through in buildings, equipment layout in control/engineering rooms, piping design, piping and equipment support design, of the cooling systems we're going to be working on...

On a daily basis I'm using the 3skeng plugin, which suits my needs well...
Since this is also related to the piping industry I wanted to check it out, but as long as I can't get it to work, I will stick to the 3skeng plugin...

[Frederik]

@driven said:

@ Fredrick if you suspect the require is not working test it in 'Ruby Console'. e.g.

> pform = (Object;;RUBY_PLATFORM =~ /mswin/i) ? ;windows ; ((Object;;RUBY_PLATFORM =~ /darwin/i) ? ;mac ; ;other)
> platform = pform.to_s

should return windows

It sure does...

@driven said:

then try

if platform == "windows"
>   require 'CoolPipe/iconv.so' #  применяем iconv
> elsif platform == "mac"
>    #  не применяем
> end

should return true

if it does it's not the problem, if it doesn't, check permissions on that file... 'CoolPipe/iconv.so' in that Directory, don't move it...
john

A bit strange...
It seem to only allow me to write

if platform == "windows"

I don't seem to be able to insert the remaining text...

[driven]

@frederik said:

I don't seem to be able to insert the remaining text... :?

I think that's the windows single line 'Ruby Console' thing... mac is multiline, and mines actually full page as well, sorry..

just use the require and see if it returns true

require 'CoolPipe/iconv.so'

might need the rest of path if nothing else has loaded..
john

[driven]

I think single line looks like this

if platform == "windows"; require 'CoolPipe/iconv.so'; elsif platform == "mac";  end

but I never need it so... john

[Frederik]

Cheers, John...!

I believe I will just leave it as is for the time being...
Like I wrote I don't like to copy anything to any system folder, so until they come up with an alternative plugin, I will stick to 3skeng...

[ken]

I have tried each and every suggestion trying to get this plugin to work. The error is the same, can not find iconv.so.

Is there anyone that has this plugin working on a Windows machine?

And if you do have it working on a Windows machine, what size is your iconv.so. My iconv.so file is 24661 Date 2008-08-12-14:18.

I can't believe it is so hard to get this plugin to work.

Anyway thanks in advance. I am surprised the author doesn't offer any help.

Ken

[driven]

@Ken & @Fredrick,

I had a look on the russian forum the authors reply to your issue is

@unknownuser said:

Has already been written about it many times. Find the folder with the plugin file iconv.dll and throw it in the folder \ Windows \ System32 without this dll can not run so .... and no magic

I don't know windows at all, but he is saying to move the iconv.dll not the iconv.so as suggested in this thread.

I don't know if adding .dll is wise, maybe dan will comment...

john

[Dan Rathbun]

@unknownuser said:

Is there anyone that has this plugin working on a Windows machine? ... I can't believe it is so hard to get this plugin to work.

This plugin (in it's current state,) needs to go on the Plugins Quarantine list !

It needs a major overhaul.

@unknownuser said:

The error is the same, can not find iconv.so.
...
And if you do have it working on a Windows machine, what size is your iconv.so.

ANY compiled Ruby binary file used, should match the Ruby version and platform of the currently loaded Ruby interpreter.

So.. it is a BAD IDEA to distribute so ("shared object",) dll ("dynamic linked library",) or any binary files WITH PLUGINS.

Users should just install the PROPER full Ruby edition, and use a load path script to push the paths to the standard Ruby library directories, into the global array $LOAD_PATH, which is used by the global methods load() and require() to find external files.

On SketchUp v 8.x PC this is Ruby v1.8.6-p287
Ruby v1.8.6-p287 Windows One-Click Installer

THEN ... after the above is done, the call to load the PROPER iconv.so file, from the platform specific sub-dir ("/i386-mswin32"), of the standard Ruby lib dir, .. is simply:
require("iconv")
(The line " Sketchup::require 'CoolPipe/iconv.so'" about 13th in "coolpipe_Start.rb" needs to change.)

@unknownuser said:

I am surprised the author doesn't offer any help.
He is Russian and does not speak English.

He likely does not read English, and cannot read the Programming Ruby book, because his code violates many rules and corrupts the SketchUp Ruby environment.

Sorry .. avoid using this plugin until it is fixed.

[ken]

Dan

Thank you. There for awhile I just assumed I was the only one having trouble.

So thanks for taking the time to answer my request.

Ken

[Stephlez]

I am trying to use this plugin, i followed the 3 steps installation on their site:

1. unzip the file to a folder Plugins installed SketchUp
2. Copy the file iconv.dll to the System32 folder or SysWoW64
3. Reboot
   It loads without errors. However it seems i am not getting any pipe models from the database (database looks empty)

[Se7ven]

From his site it seems that he will very soon be releasing version 2.0.