[Plugin] Stair Maker

sdmitch

Hi there,
after installing "StairMaker" the plugin shows up under "plugins"
The Dialog box asks for "normal, spiral....." etc
That was it, nothing else happens.
Sorry - what has to be done next ?
Thanks for your comments
Uli

This is what you should see
stair maker.gif

If not, open the Ruby Console window(Windows>Ruby Console) and try the plugin again to see if there are any error messages.

atelierpaar

thanks for your quick response
Here is what i get from the Ruby Console

Error: #<ArgumentError: Cannot convert "7.65748031496063" to Length>
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/Stair Maker.rb:267:in to_l' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/Stair Maker.rb:267:in get_defaults'
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/Stair Maker.rb:77:in reset' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/Stair Hello Maker.rb:68:in initialize'
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/Stair Maker.rb:25:in new' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/Stair Maker.rb:25:in block in <top (required)>'
SketchUp:1:in `call'

sdmitch

@atelierpaar said:

thanks for your quick response
Here is what i get from the Ruby Console

Error: #<ArgumentError: Cannot convert "7.65748031496063" to Length>
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/Stair Maker.rb:267:in to_l' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/Stair Maker.rb:267:in get_defaults'
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/Stair Maker.rb:77:in reset' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/Stair Hello Maker.rb:68:in initialize'
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/Stair Maker.rb:25:in new' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/Stair Maker.rb:25:in block in <top (required)>'
SketchUp:1:in `call'

Do you use ',' instead of '.' between number and fractional part?

atelierpaar

Well, I dont get to type in any value.
the plugin quits right after the first Dialog box

sdmitch

@atelierpaar said:

Well, I dont get to type in any value.
the plugin quits right after the first Dialog box

That doesn't answer my question. If you could enter a number say 1234 mm as meters, would it be 1.234 or 1,234?

p.s.

Please check messages.

filipebonito

hello,

i have the same problem, when i open the plugin, i see the dialogue to chose the stair type, but after that get no options...

i use "," in numbers, lile "12,50"

here is the ruby console:

"Error: #<ArgumentError: Cannot convert "4.921259842519685" to Length>
C:/Users/admin/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Stair Maker.rb:267:in to_l' C:/Users/admin/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Stair Maker.rb:267:in get_defaults'
C:/Users/admin/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Stair Maker.rb:77:in reset' C:/Users/admin/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Stair Maker.rb:68:in initialize'
C:/Users/admin/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Stair Maker.rb:25:in new' C:/Users/admin/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Stair Maker.rb:25:in block in <top (required)>'
SketchUp:1:in `call'"

what can i do?
thanks
filipe bonito

sdmitch

I have sent by Personal Message a version that should work for you.

rabas

Could i have , please, the comma version?

sdmitch

@rabas said:

Could i have , please, the comma version?

I have updated the plugin at the Plugin Store to work with comma or period. Delete the existing Stair Maker.txt file.

MattBram

Hi,

I meet the same result as Filipe does in the console, and the same result in Sketchup, i.e. nothing appears after having completed the tables.

I tried using either "." and "," with the plugin download today, and I also tried working in inches as well as in mm without need of using decimals nor fraction.

What have I been doing wrong?

Thanks,

Matt

sdmitch

Deleting the existing StairMaker.txt file and allow the plugin to recreate it.

johnwmcc

Thanks, SD Mitch, for this very useful plugin.

Just installed this on iMac El Capitan. The input box dialogue is truncating the field names.
InputBox truncates field names.png
This is a known bug in InputBox on Mac, and can be fixed by adding extra spaces in the Prompts line of the call to inputBox.
prompts=["Step Width: ","Tread Depth: ","Riser Height: ","Num of Steps: ","Step Depth:","Rail Height:", "Rail Offset:","Height of Stairs:"]

The text above displays only one extra space added but in reality there are several - HTML is collapsing multiple spaces into one.

Result
InputBox fixed.png

I've incorporated this change into my own copy. Could it be fixed for any future plugin updates?

sdmitch

Since I don't have or have access to a Mac, there is no way for me to address this problem.

Silentip

Hello. I'm trying to launch the Stair Maker plugin in SketchUp 2017. I get this error

Error: #<NameError: uninitialized class variable @@ss_height in SDM::Stair_Maker>
C:/Users/Silent_ip/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/StairMaker/StairMaker.rb:287:in put_defaults' C:/Users/Silent_ip/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/StairMaker/StairMaker.rb:84:in reset'
C:/Users/Silent_ip/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/StairMaker/StairMaker.rb:54:in initialize' C:/Users/Silent_ip/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/StairMaker/StairMaker.rb:9:in new'
C:/Users/Silent_ip/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/StairMaker/StairMaker.rb:9:in block in <top (required)>' SketchUp:1:in call'

Code