[solved!!]onMouseMove show component instance

Chris Fullmer

(I'm not sure that there is a question in this - its more of me just talking out loud).

I'm trying to do the same, and I'm getting the problem that once I attache the component to the cursor, then the ip point easily grabs onto the component when the mouse moves. And sine the component is closer to the camera, than the center of the component that is attached tot he cursor, then the ip jumps to the closer position, moving the whole component closer. And repeats. So every time I start move the mouse,t he component gets closer and closer to the camera until it clips out of view, and the mouse can reach geometry in the model to reset the ip back to the model.

I have not thought much about this yet, but I was wondering how you guys got it to work? It just doesn't seem to do the trick for me. I was really hoping it would be easy to place a component in the model, and have the component attach to the cursor.

Its not the end of the world if it turns out to not work, I don't truly need to show the component.

thomthom

Do you need a custom tool? Can you not use model.place_component ?

Chris Fullmer

I think I do - I need to know what edge in what group it was placed on so I can break the edge and insert new geometry. I can do all that easy enough if I do it with my own tool. But I'm scared of relying on too many observers. I've had bad luck with them already, and I know you (thom) have had many projects ruined by them.

So I think I need my own tool. Its working ok though, I'm actually drawing lines to the viewport that represent the component I'm placing. I can attach that to the mouse easy enough, and it looks pretty cool.

Dan Rathbun

Hmmm... would have been nice if the method returned a ref to the newly placed instance (instead of the model object itself*****.) Then you might have been able to easily get the instances origin point and go from there.

Just weird that a ref to the placed instance is the obvious preferred return for a method like this. Sometimes I just do not understand how the obvious can be so often overlooked.

***** The API doc is in error when it says it returns nil.

Dan Rathbun

Ok.. you could call:
lastdefn = defn.instances.last
after using model.place_component( defn, false )

Wait... weirdness, the method returns immediately, BEFORE the instance is actually placed. (It spits out a redraw time to $stdout after the instance is placed.) The move component tool does not exit with a false 2nd arg, but remains in the move tool, and the user could inadvertently move the instance again.
It would be nice if this method took a block to be run after the instance was placed.

thomthom

Agree 100% with you Dan.

fatihbarut

I think eventhough the title has "Solved" the last solution is missing

Here is one of them.


model = Sketchup.active_model
ent = model.entities
sel = model.selection

defn = Sketchup.active_model.definitions

def onMouseMove(flags, x, y, view)
  return nil if not @instance ### only works when instance is set
  @ip.pick(view, x, y)
  if @ip != @ip1
    view.invalidate if( @ip.display? or @ip1.display? )
    @ip1.copy!(@ip)
    view.tooltip=@ip1.tooltip
    @instance.transform!(Geom;;Transformation.new(@ip1.position))
  end
end

def onLButtonDown(flags, x, y, view)
  return nil if not @instance
  @ip1.pick(view, x, y)
  if @ip1.valid?
    @instance.transform!(Geom;;Transformation.new(@ip1.position))
    @instance=nil ### un-sets instance
  end
end

lastdefn = defn[0] # ! I had just one definition in my component definition list therefor defn[0] worked well for me
model.place_component( lastdefn , false )

Jim

As has been discovered already in this thread, you probably want to use @instance.move!(..) rather than .transform!(..) so as not to disturb the Undo stack.

Another idea might be to use the opengl draw commands to draw a proxy object instead of actually moving an Instance with the mouse.

Chris Fullmer

@jim said:

Another idea might be to use the opengl draw commands to draw a proxy object instead of actually moving an Instance with the mouse.

That's what I ended up doing, which was disappointing to me, but still looks pretty cool.

kaas

I'm trying out several methods for a plugin-user to define a plane. Picking 3 points works but maybe more easy would be to use a component plane thats glues to the underlying objects.

Using the code from this thread I can attach a component-plane to the mouse pointer.

behavior = @plane_def.behavior behavior.snapto = SnapTo_Arbitrary behavior.is2d = true

Adding this code makes the component-plane glue to objects but only outside the ruby code as it seems. The glue works if the component is picked from the component browser OR if the component is added with model.place_component componentdefinition, repeat. Then I would have to add an observer to have the code pick it up again.

Is there any way around this?

edit: changed 'listener' to 'observer'

tt_su

In addition to changing the behaviour you need to use glued_to= to specify what it should be glued to.

...or maybe I didn't quite understand what you where asking for..?

kaas

@tt_su said:

In addition to changing the behaviour you need to use glued_to= to specify what it should be glued to.

Hello Thomas, Thanks for your reply.

I want the component to glue to any face in the model, just like a normal glue-ing component would do, if inserted from the component browser.

Funny part is: when using the code below the instance doesn't glue. If I manually pick the component afterwards from the component browser and place it, it does glue...??

def activate
	@model = Sketchup.active_model
	@definitions = @model.definitions
	@entities = @model.entities	
        @ip = Sketchup;;InputPoint.new
	@ipP = Sketchup;;InputPoint.new	
		
	size = 20
	pm = Geom;;PolygonMesh.new
	pm.add_point([-size, -size, 0]) # 1
	pm.add_point([-size, size, 0]) # 2
	pm.add_point([size, size, 0]) # 3
	pm.add_point([size, -size, 0]) # 4
	pm.add_polygon(1,3,2,4)
	
	smooth_flags = Geom;;PolygonMesh;;NO_SMOOTH_OR_HIDE
	mb_rundim_plane_def = @definitions.add("mb_runDimPlane");
	dim_plane = mb_rundim_plane_def.entities.add_faces_from_mesh(pm, smooth_flags)
	behavior = mb_rundim_plane_def.behavior
	behavior.snapto = SnapTo_Arbitrary
	behavior.is2d = true
	
	@instance = @entities.add_instance(mb_rundim_plane_def, ORIGIN)
end # def activate

def onMouseMove(flags, x, y, view)
  @ip.pick(view, x, y)
  if @ip != @ipP && @instance
    view.invalidate if( @ip.display? or @ipP.display? )
    @ipP.copy!(@ip)
    view.tooltip=@ipP.tooltip
    @instance.move!(Geom;;Transformation.new(@ipP.position))
  end
end

def onLButtonDown(flags, x, y, view)
  return nil if not @instance
  @ipP.pick(view, x, y)
  if @ipP.valid?
    @instance.move!(Geom;;Transformation.new(@ipP.position))
    @instance=nil
  end
end

TIG

You must tell SketchUp which face to glue it onto.
You could do that by using a ' pickhelper' which is activated 'on button up'... which finds the best face-match http://www.sketchup.com/intl/en/developer/docs/ourdoc/pickhelper#picked_face
And then use:
@instance.glued_to=some_face_that_you_specify_from_pickhelper
See http://www.sketchup.com/intl/en/developer/docs/ourdoc/componentinstance#glued_to=

kaas

Hi TIG,

Thanks for your suggestion. I changed the code, drew a simple rectangle and pushed-pulled it. After picking it throws an error on the 'glue-line':
Error: #<ArgumentError: Can only glue to something in the same component>
Doesn't make sense to me. They should be both in the same context: Sketchup.active_model.entities. Google-ing this error results in another thread you were active in http://sketchucation.com/forums/viewtopic.php?f=180%26amp;t=54813 but no help there. Any suggestions anyone?

def onLButtonUp(flags, x, y, view)
	ph = view.pick_helper
	ph.do_pick(x, y)
	face = ph.picked_face
	@instance.move!(Geom;;Transformation.new(@ipP.position))
	view.invalidate
	if face
		@instance.glued_to=face
	end	
end

TIG

You need to set ents=model.active_entities and add the instance to that entities context.
BUT if the face you pick is inside another context you cannot glue to it.
You can check that by using instance.parent.entities==face.parent.entities

Why not use the way that mimics the native component placer - http://www.sketchup.com/intl/en/developer/docs/ourdoc/model#place_component

You already have the gluing definition, so you can erase the placed instance/code... and there is no need to then find the face at all ?

kaas

@tig said:

..Why not use the way that mimics the native component placer - http://www.sketchup.com/intl/en/developer/docs/ourdoc/model#place_component...

I gave your suggestion a go. Instead of adding the component to the mouse I used @model.place_component ... and have the code pick it up again with an observer.

Problem I now face: the newest added instance doesn't show up if I look for it. My guess is: its returning the definition info instead.

I tried:

@entities.each {|e|
   puts e.to_s
   next unless e.is_a?(Sketchup;;ComponentInstance)
   puts "instance; #{e.to_s}"
   puts "origin; #{e.transformation.origin}"
}

OR

	
   instance = @definitions[instance_def_name]
   puts "instance; #{instance.instances[0].to_s}"
   puts "origin; #{instance.instances[0].transformation.origin}"

Only if I add another (and another) instance, all but the last one are found (see animated gif).

I must be missing something elementary... Any suggestions?

TIG

You already have a reference to the instance called @instance - so, without re-coding [so you make a definition rather than an instance], you can get a reference to the instance's definition thus: @defn=@instance.definition, then immediately erase the instance with @instance.erase!...
And then you NOW use @model.place_component(@defn)

kaas

@tig said:

You already have a reference to the instance called @instance - so, without re-coding [so you make a definition rather than an instance], you can get a reference to the instance's definition thus: @defn=@instance.definition, then immediately erase the instance with @instance.erase!...
And then you NOW use @model.place_component(@defn)

...? I changed the code a bit compared what I posted a few posts above. Now, at the start of model.place_component for the first time there is no instance in the model, only a definition. So I'm not sure what I should delete here.

I ask myself: is the result of Sketchup.active_model.place_componentthe same context as Sketchup.active_model.entities?

kaas

Still trying to figure it out. Tested it by putting the code directly into the Ruby Console and putting it into a rb-file.

Try with a freshly started Sketchup 2014 and delete 'Sophie' (but leave her in the component definitions). First I executed in the Ruby Console:


@model = Sketchup.active_model
@ents = @model.entities
@defs = @model.definitions
inst = @defs["Sophie"]
@model.place_component inst,false

Place her anywhere but not on the origin 0,0,0

Second run this:


@ents.each {|e|
next unless e.is_a?(Sketchup;;ComponentInstance)
puts e.transformation.origin
}

You get the proper coordinates of Sophie.

Now I delete all Sophies but leave her in the component definitions.
I wrap the above code into a plugin. I need to add an observer so the code can pick it up again (place_component breaks the code). I load it and start it with: MB_place_instance.activate

The first placed instance always returns 0,0,0 as the origin. Add another one (activate again) and it returns the origin of the first added instance etc... Looks like its returning the definition and not the placed instance.

There must be some logic in it but I fail to see it...


require 'sketchup.rb'
module MB_place_instance

	class MyDefObserver < Sketchup;;DefinitionObserver ### create an observer (place_component breaks the code and returns to SU) ###
	   def onComponentInstanceAdded(definition, instance)
		 puts "observer has fired; " + instance.to_s
		 MB_place_instance.refire(instance) # go back to the tool
	   end
	end

	def self.activate
		@model = Sketchup.active_model
		@ents = @model.entities
		@defs = @model.definitions
		inst = @defs["Sophie"]
		@observer = MyDefObserver.new
		@model.definitions[0].add_observer(@observer)
		@model.place_component inst,false
	end #def
	
	def self.refire(instance)
		@defs[0].remove_observer(@observer) # delete the observer
		@observer = nil # delete the observer in case previous method fails
		GC.start # collect garbage
		@ents.each {|e|
			next unless e.is_a?(Sketchup;;ComponentInstance)
			puts "looking with each; #{e.transformation.origin}"
		}	
		puts "directly adressing passed instance; #{instance.transformation.origin}"
	end #def
	
end #module

### start in RubyConsole with; MB_place_instance.activate