Help with table legs needed.
-
Hi G/ and welcome!
You can draw single lines (or use arcs to draw curved ones) then use the Follow me tool to shape the legs to thin "wires".
-
Hi Gaieus,
Thanks for the welcome.
I tried your suggestion and drew a single arc. Once I understood that the face must be pendular to the path I was able to start building. I'll put some more effort into it, and get back with more questions (or hopefully a finished leg).
Thanks again for the hint!
/Greg
-
Two things to take care of:
- make sure that any curved path (arc) has a bigger radius than your circle that follows this path (otherwise it will "twist" into itself)
- When you experience that some faces are not created, the reason will probably be that they are too small (SU won't create faces whose edges are as small as ~1/16" or ~1mm). In such a case, scale your model up by (say) 10 and when finished, scale it back by 0.1
-
If u divide the circle in 3 and draw an arc and use follow me on it, should be easy .. like this..
-
Excellent. Thanks. I'll give it a (newbie) shot.
-
-
Hi all,
I have made a quick model to try some of your suggestions. It seems to work out ok for a mockup.
Frederik -> Thanks for your model. I believe your version is more true to the original.
You have all been very helpful, so thanks a lot for sharing!
/Greg
-
@frederik said:
@ely862me said:
If u divide the circle in 3 and draw an arc and use follow me on it, should be easy ..
That wouldn't be the right way of doing it, since the legs on the Piet Hein Superellipse table is four single tubes...
Didn t saw exactly how they look like..sorry for that.
Anyway--seems like u re getting there
. Great job! -
@ely862me said:
Didn t saw exactly how they look like..sorry for that.
Didn't mean to pick on you, Ely... Sorry if you felt that...
-
@frederik said:
Didn't mean to pick on you, Ely... Sorry if you felt that...
Hey..no problem(i didn t felt like that)- i should have watch better .. now i know how they look like.
Take care!
Advertisement