[Plugin] BoolTools just released!

Gus R

David,

Here's the tutorial in Version 6.

I recommend using drawhelix13.rb for the helix and lines2tubes.rb for the tube. Follow me will distort the tube too much in this case -- even though it will still work.

Your 12 segment drill bit looks pretty good. As far as SU hanging consider that it might take some time depending on your CPU capacity. It might take 5 minutes. In my case, certain complicated functions will lead to the appearance of SU locking up when in fact it hasn't. This will happen even when I'm rendering. Sometimes I have to let SU work and not touch a thing or move the mouse away from the SU screen otherwise it will cause SU to crash. Try it again with 24 segments only this time give it a good solid 5 minutes or more without doing any other computer tasks.

Gus

david_h

Thanks for the TUT. it was the DH13 rb that I did use. I think I have the L2Tube rb as well, although I didn't use that one.

Thx,

D

david_h

As per your Tut. Thanks much.

David

Click Draw

I'm not sure why, but I still get some missing faces when I try to do a drill bit. I match the segments in the helix and the cylinder. I build it large so I can scale down....same result. Very frustrating. Could there be any issues with other rubies effecting the ones I use for this process? The gray hair just keeps coming as I keep trying to figure it out. HELPPPPPP!

Frustrated, Jeff

Gus R

Jeff,

I've had the same situation occur as well. So far it seems as though you have to try these at random at a larger scale. Anytime you get an intersetion that is around 1/16 inch or 1 mm it will corrupt the subtraction. At the same time, if you scale it too much it will corrupt the subtraction. I tried it once at 1,000,000X and the corruption was even worse.

So far my computer has survived the trip out the window and down 6 floors. It's been almost 7 years now. I have been tempted.

Gus

Whaat

@gus r said:

Jeff,

I've had the same situation occur as well. So far it seems as though you have to try these at random at a larger scale. Anytime you get an intersetion that is around 1/16 inch or 1 mm it will corrupt the subtraction. At the same time, if you scale it too much it will corrupt the subtraction. I tried it once at 1,000,000X and the corruption was even worse.

So far my computer has survived the trip out the window and down 6 floors. It's been almost 7 years now. I have been tempted.

Gus

BoolTools uses the intersection method from the SketchUp API which is the exact same function as the 'intersect' context click function that can be accessed from the UI. Sometimes, the intersect method fails (likely due to precision errors). For complex operations (such as a helical subtraction, the chances of these precision errors are greater. If the intersection method fails to execute properly, you will get strange results with BoolTools.

ClickDraw: If you could post your SKP file, I can take a look just to make sure that your problems are not being caused by some other issue.

Dale

plot-paris

using a modifier key to keep the difference-object is a great idea. so we will see that in the next version? (along with nested grouping support )

ps: I use 'Ctrl + Shift + V' for 'Paste in place' as too. soon Google will integrate it as a default shortcut...

sjtunba

why i can't see it

xrok1

@plot-paris said:

using a modifier key to keep the difference-object is a great idea. so we will see that in the next version? (along with nested grouping support )

ps: I use 'Ctrl + Shift + V' for 'Paste in place' as too. soon Google will integrate it as a default shortcut...

just bought it awesome ,but +1 on this option.

NewOne

@whaat said:

@unknownuser said:

A request. When performing a Cut - it is sometimes desirable to KEEP the geometry that is acting as the edge for the cut. eg Trimming Steel Beams 1 and 2 with Wall 1.
Sometimes I'd like to keep Wall 1 after the operation.
Could this be built in - eg with an option dialog ??? Would be very handy.

I anticipated this request and tried hard to get this to work for this version but it was too buggy. My idea was that you could hold down the CNTL modifier key while selecting if you want to keep the cutting geometry. Hopefully, I can get it to work for the next version. There is a fairly easy workaround though:

Select the 'cutting' group and press CNTL+C to copy. You can actually select the group by hovering your mouse over the cutting group while you have the 'Difference' tool active.

Perform the cut with BoolTools

Choose 'paste-in-place' to get the cutting group back. (a shortcut-key would come in handy here...)

Hope this helps!

Can you make that just the intersection to be deleted when cutting? Just the part of steel beam/or wall that is common to be deleted ?In AutoCAD the substracted object is deleted. It lets behind a gap in the other one. This tool can be better

Coronel

Great tutorial, thanks
drillsB&D.jpg

blah238

Does this work in SketchUp 8?

Gaieus

@blah238 said:

Does this work in SketchUp 8?

Yes, although for SU 8 Pro, with the introduction of Solid tools, it has become sort of obsolete.
Yet for those with SU Free, it is still cheaper than buying Pro of course.

tfdesign

If you can get it to work that is. I couldn't get mine to work.

thomthom

This plugin or SU8?

Gaieus

Or the solid tools?

Whaat

BoolTools relies on the model.raytest method which is buggy in SU8. Therefore, I would not recommend using it with SU8 until that bug is fixed.

tfdesign

@thomthom said:

This plugin or SU8?

The former.

FelixPQ

Hi,
I just got your tool and though it work fine for most of the tests I've done, there seem to be a problem with subtraction when my second group is made of compound curves (see file below), the face of the first group remains untouched. I made it work by first doing an intersect and subtracting again and still I have to remove one face that remain but at east I get what I want. I have a similar problem with a tube that I try to "cut" at an angle, the inner cylinder is there (x-ray) but a face hides it, again I have to do it in a few steps to get the result I want.

Maybe this will help you resolve this kind of problem with a later revision.

Thanks for a still great tool, the alternative is far worst.
Felix

Sample

thomthom

@felixpq said:

Maybe this will help you resolve this kind of problem with a later revision.

I see you have notied in your profile that you have SU8 - have you tried your model with SU's own Solid Tools?