[Plugin] GKWare Cabinet Maker

Garry K

I am doing a fairly thorough testing of the Tall Cabinets. So many permutations and combinations that it is taking longer than I originally anticipated.

There are 7 section combinations Times 6 constructions Times 3 for uppers, base integrated and base non integrated.

That's 142 combinations and doesn't even begin to deal with different types of interiors.

Here is a model containing 24 different tall cabinets. The 3 rows on the right are uppers, integrated base, and non integrated base. The six columns on the right represent 6 constructions.
The six cabainets on the left (2 rows of 3) represent 1 construction for base cabinets with integrated kick

These tests have uncovered a few Face Frame bugs that you can visually see. The cabinets with 1 and with 2 sections show correct top gap but only the cabinets that have the bottom section have correct bottom gap. Additionally one cabinet has rendered incorrectly.

So ... testing continues.

cabmaker testing.PNG

Garry K

Version 1.0.39 is now ready to download.

Available from my web site or from Sketchucation.

Garry K

If you want to have a shared location for templates and library files there is a way. I created a shared location on a different drive and then set up a batch file to point to that location.

One reason to do this is if you have several licensed computers and you want to have 1 set of templates. Another reason is you want to make sure your templates don't get over written during an update.

From the command prompt
subst x: e:\library\gkware_cabmaker

Then copy the following files into the shared area

library location.png

Next from the main menu choose
Extensions\GKWare_CabMaker\Cab Maker - Edit Config
And set the library location to x:

edit config.png

Finally restart sketchup for the changes to take effect.

Garry K

I spent another 2 days testing and found a few more errors in the tall cabinets.

Now pretty happy with the test suite. The skp test file is 7 megs and contains 90 tall cabinets of various constructions and configurations.

Version 1.0.40

some configurations for frame less overlay construction for tall cabinets had the doors in the bottom section incorrect heights. fixed
the auto drawer size feature was not properly updating the drawer height. fixed
when using auto drawer size the drawer box height was inconsistent. fixed
For Overlay doors only the top Gap can be now be eliminated by setting the value to negative door gap.

top gap gone.PNG

Here are the 90 tall cabinets

cabmaker testing.PNG

Garry K

Version 1.0.40 now ready for download

Garry K

1.0.41 ready for download

Version 1.0.41 - Mar 30, 2016

Side dado's incorrect for Base cabinets with Integrated Kick with a 0 notch and side dadoes. Fixed
Sink cabinets with side dado and rule to omit top had top dado. Top dado should be skipped. Fixed
Parts report sometimes missing a part. Fixed
Added new parts report for Gold. *_full_part_list.csv
Added configuration setting for 'Silent Permissions'
Update manual and added lines to translation files

Garry K

I am working on a new way to choose a cabinet from the library for those of you who want to work with libraries.

The idea is to add a find button, then pop up a new window that contains pictures of your cabinets. There would be a bit of work on your part.

What does everyone think?

abdalmalki

Garry,
I think it will consume a lot of your time without big advantage to the software.
That's my two cents.

Garry K

Version 1.0.42

Added Confirm Save Configuration and a confirm popup to Web Dialog.
Added context sensitive help for cabinet templates. If 320 X 240 png image exists in library folder
Added version number to web dialog title
Side by Side drawers now work for frameless construction and stretchers set to at least 1
You now have option for edging upper cabinet ends of the sides if not skinning the top and or bottom
Corner cabinet adjustable shelving had edging along the back where the shelf butts up against the corner brace. Fixed
Sides, Top and Bottom front edges had edging with face frame construction. Fixed
You can override shelf spacing for up to 3 shelves
You can now set pullout spacing for up to 3 pullouts or use the default rule
Cabinets with 1 door set to pullout now works with more than 1 pullout

Garry K

You can set the openings (space between shelves) and (space between pullouts) here

Shelf Openings.png

You can have different shelf width adjustments for Uppers and Base cabinets and have 2 widths for shelves for base cabinets. Also you can edge the ends of sides - bottom, top, none or both.
Set the new values to -1 to disable

Shelf Adjustments.png

Here is the change for multiple pullouts with a door.

multiple pullouts.png

Here are split sink shelves - you set the length - set to -1 to disable.

Sink shelves.png

Garry K

Version 1.0.42 is now ready for download

Garry K

Added pigeon hole capability using vertical dividers and horizontal dividers. Works with frameless or face frame construction and for uppers or base cabinets.

This can work as a wine rack.

wine racks.png

utiler

Looks like my wine rack, Garry...

Always empty.

Garry K

Andrew - mine too. Someone suggested that I have to buy it faster than I drink it!

In actuality one of my hobbies is making wine. We live in wine country in British Columbia Canada. I do have a cool dark cellar and a metal wine rack that stores bottles 30 per shelf. Each shelf holds 8 bottles on the first row, 7 on the second row etc.

Wine ages best in a cool dark place. The advantage of having the bottles touch each other in this way is that it is suppose to reduce the effect of small temperature fluctuations.

wine pyramid.png

Garry K

Version 1.0.43 will be ready today for download

Added horizontal grid along with vertical dividers. Can use as a wine rack.
Modified the web dialog materials tab. Colors now show on a empty label just to the left of the color pulldown.
Modified web dialog. When Mac users use arrow keys in a closed drop down the graphics now update like it does for Windows users.

Garry K

Version 1.0.43 ready for download

Next I am looking at adding a right and left angled cabinet. This style of cabinet is for finishing a run of cabinets.

Garry K

Version 1.0.44 fixes a number of bugs that where version specific

Ready for download - those running sketchup 2016 do not need to upgrade.

Older versions of sketchup that used Ruby 1.8 and did not support round(decimals). fixed
Older versions of sketchup 7, 8 and 2013 do not support adding linear dimensions programatically. CabMaker now detects sketchup version and only attempts dimensions for version 14.0 and greater
The way I was grabbing images for cabinet templates only worked on recent versions of sketchup. Fixed