Script to bring all components from library into SU model

[TIG]

` skpfolderpath='C:/temp/my_compos'

OR wherever the SKPs are...

model=Sketchup.active_model
ents=model.active_entities
defs=model.definitions
pt=Geom::Point3d.new(0,0,0)
skps=[]
Dir.foreach(skpfolderpath){|f|skps << File.join(skpfolderpath, f) if File.extname(f).downcase==".skp"}
then load from the list of SKPs...
skps.each{|skp|defn=defs.load(skp);###} This *should* load the defns from the folder. Does it ? If you want to place instances use the extra code on ' defn', inserted into the {} block at ' ###`'

[samyell77]

Thanks again TIG

@unknownuser said:

skpfolderpath='C:\Users\sam.morris\Documents\TEST COMPS'

OR wherever the SKPs are...

model=Sketchup.active_model
ents=model.active_entities
defs=model.definitions
pt=Geom::Point3d.new(0,0,0)
skps=[]
Dir.foreach(skpfolderpath){|f|skps << File.join(skpfolderpath, f) if File.extname(f).downcase==".skp"}
then load from the list of SKPs...
skps.each{|skp|defn=defs.load(skp);###}

Pasted all this in in one go and still get a Nil result - . Thought I'd try with a small, local component folder so copied some SKPs onto into a folder in my documents folder and pasted the path into your script. Have tried this with '/' and '' separators cos I remember there was an issue with that previously on another script you looked at for me.
I had been working through the script in sections previously but this time pasted it all in - is this correct or do I still need to iterate down (manually) through the components in the components library before running

@unknownuser said:

skps=[]
Dir.foreach(skpfolderpath){|f|skps << File.join(skpfolderpath, f) if File.extname(f).downcase==".skp"}
then load from the list of SKPs...
skps.each{|skp|defn=defs.load(skp);###}

Sorry to keep coming back . . . with a nil result
Hope this makes sense

[TIG]

Try a simple test first
skpfolderpath='C:/Users/sam.morris/Documents/TEST COMPS' Dir.foreach(skpfolderpath){|f|puts f}
Do you get a list of the folder's contents printed, include '.', '..' and all files ?
If so try this
skps=[];Dir.foreach(skpfolderpath){|f|skps << File.join(skpfolderpath, f) if File.extname(f).downcase==".skp"}
Do you get a list of just the SKP files when you then type skps?
If so we have got the list and just need to 'load' the SKPs...

[samyell77]

Hi TIG,
Getting somewhere now - Im getting the list! Just to let you know Im using the plugin Ruby Console Editor to run your scripts and am now viewing the results in the (built in) Ruby Console - I hope this isn't causing any of the issues.
I ran the first part of your test and got the following

@unknownuser said:

.
..
PLAT Carpet Amber FULL Diagonal A.skp
PLAT Carpet Amber FULL Diagonal B.skp
PLAT Carpet Amber FULL Diagonal C.skp
PLAT Carpet Amber FULL Diagonal D.skp
"Nil result (no result returned or run failed)"

Then I ran the second part and got

@unknownuser said:

.
..
PLAT Carpet Amber FULL Diagonal A.skp
PLAT Carpet Amber FULL Diagonal B.skp
PLAT Carpet Amber FULL Diagonal C.skp
PLAT Carpet Amber FULL Diagonal D.skp
"Nil result (no result returned or run failed)"

When I type 'skps' i get this

@unknownuser said:

.
..
PLAT Carpet Amber FULL Diagonal A.skp
PLAT Carpet Amber FULL Diagonal B.skp
PLAT Carpet Amber FULL Diagonal C.skp
PLAT Carpet Amber FULL Diagonal D.skp
"C:/Users/sam.morris/Documents/TEST COMPS/PLAT Carpet Amber FULL Diagonal A.skpC:/Users/sam.morris/Documents/TEST COMPS/PLAT Carpet Amber FULL Diagonal B.skpC:/Users/sam.morris/Documents/TEST COMPS/PLAT Carpet Amber FULL Diagonal C.skpC:/Users/sam.morris/Documents/TEST COMPS/PLAT Carpet Amber FULL Diagonal D.skp"

So Im getting somewhere - the (plugin) Ruby Console Editor wasn't showing me the list so didn't look like anything was happening.
I tried copying and pasting some of your code to load the skps but Im a serious Ruby novice so keep getting syntax error messages! Im guessing what I need to do next is run this piece of code

@unknownuser said:

skps.each{|skp|defn=defs.load(skp)

But couldn't work out whether in needs to be in any kind of container '{}' or '[]'?
Once I have loaded the skps, do I need to past the following into the console at ###

@unknownuser said:

tr=Geom::Transformation.new(pt)
inst=defs.add_instance(defn, tr)
pt.x=pt.x+1.m

Thanks again

[TIG]

skps.each{ |skp|defn=defs.load(skp) ****}****
Loads the SKPs into the model.
The other part is only if you want to add an instance to the model's entities too...

[samyell77]

Hi TIG,
Managed to have another look at this today - afraid Im falling at the last hurdle tho. Have run the code an managed to get them to load into the components browser but can't seem to get the components to place into the model. Once I have run this part of code;

skpfolderpath='C:\Users\sam.morris\Documents\TEST COMPS'
model=Sketchup.active_model
ents=model.active_entities
defs=model.definitions
pt=Geom::Point3d.new(0,0,0)
skps=[]
Dir.foreach(skpfolderpath){|f|skps << File.join(skpfolderpath, f) if File.extname(f).downcase==".skp"}
skps.each{|skp|defn=defs.load(skp);}

the components load into the component browser. Can I just check that nothing should be loading into the model window at this point. Not sure whether

pt=Geom::Point3d.new(0,0,0)

should actually put each newly loaded component into the model at 0,0,0?

I have tried pasting the next piece of code in so that it reads as follows;

skpfolderpath='C:\Users\sam.morris\Documents\TEST COMPS'
model=Sketchup.active_model
ents=model.active_entities
defs=model.definitions
pt=Geom::Point3d.new(0,0,0)
skps=[]
Dir.foreach(skpfolderpath){|f|skps << File.join(skpfolderpath, f) if File.extname(f).downcase==".skp"}
skps.each{|skp|defn=defs.load(skp);tr=Geom::Transformation.new
(pt)inst=defs.add_instance(defn, tr)pt.x=pt.x+1.m}

When I run this in the (plugin) Ruby Code Editor I get the following from the Ruby Console;

"Nil result (no result returned or run failed)"
Error: #<SyntaxError: (eval):9:in initialize': compile error (eval):9: syntax error, unexpected tIDENTIFIER, expecting '}' (pt)inst=defs.add_instance(defn, tr)pt.x=pt.x+1.m} ^ (eval):9: syntax error, unexpected tIDENTIFIER, expecting '}' (pt)inst=defs.add_instance(defn, tr)pt.x=pt.x+1.m} ^> C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/as_plugins/as_rubyeditor/as_rubyeditor.rb:178:in initialize'
C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/as_plugins/as_rubyeditor/as_rubyeditor.rb:199:in eval' C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/as_plugins/as_rubyeditor/as_rubyeditor.rb:178:in initialize'
C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/as_plugins/as_rubyeditor/as_rubyeditor.rb:199:in `call'
C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/as_plugins/as_rubyeditor/as_rubyeditor.rb:199

Ive tried moving '}' to various different points and have put various bits of code on new lines but still cant seem to find out why this isn't working. Really sorry to trouble you with this again but Im sooo close to getting this working - any chance you can help me get the last bit sorted? Ive attached a screen grab showing the components in the browser but not in the model and also to show how the code is formatted in the Ruby Code Editor. Just want to get the loaded components from the browser into the model starting at 0,0,0 and spaced at 1m increments along the x plane - and am tantalizingly close!

Thanks again for all your help ...

Sam

---

[TIG]

Use a simple
skps.each{|skp|defs.load(skp)}
which loads the skps into the definitions-list.
If you want to place instances of the definitions into the model you need to decide where the go.
Piling them all at the origin seems a bit silly?
How will you decide where they go ?
Let's assume they are added in a line from the origin incrementing in the x by 1m...
pt = Geom::Point3d.new(0,0,0)
You've just added the definitions and we know how many were added (skps.length), therefore we can get the new ones thus:
newdefs = defs.to_a[(defs.length - skps.length)..-1]
Now we add the instances to the model.
newdefs.each{|defn| tr=Geom::Transformation.new(pt) model.entities.add_instance(defn, tr) pt.x=pt.x+1.m }
This shifts 'pt' to the right 1m each time...

[samyell77]

Hi TIG
Im still getting a syntax error on this Im afraid. Below is everything that is listed in the console when i copy and paste the lines of code.

skpfolderpath='C:\Users\sam.morris\Documents\TEST COMPS'
C:\Users\sam.morris\Documents\TEST COMPS
model=Sketchup.active_model
#Sketchup::Model:0xcec7dfc
ents=model.active_entities
#Sketchup::Entities:0xecc7c58
defs=model.definitions
#Sketchup::DefinitionList:0xebaa640
skps=[]
[]
Dir.foreach(skpfolderpath){|f|skps << File.join(skpfolderpath, f) if File.extname(f).downcase==".skp"}
nil
skps.each{|skp|defn=defs.load(skp)}
["C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal A.skp", "C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal B.skp", "C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal C.skp", "C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal D.skp"]
pt = Geom::Point3d.new(0,0,0)
Point3d(0, 0, 0)
newdefs = defs.to_a[(defs.length - skps.length)..-1]
[#Sketchup::ComponentDefinition:0xed92f20, #Sketchup::ComponentDefinition:0xed92e1c, #Sketchup::ComponentDefinition:0xed92dcc, #Sketchup::ComponentDefinition:0xed8aab4]
newdefs.each{|defn|tr=Geom::transformation.new(pt)model.entities.add_instance(defn, tr)pt.x=pt.x+1.m}
%(#FF0000)[Error: #<SyntaxError: (eval):178: compile error
(eval):178: syntax error, unexpected tIDENTIFIER, expecting '}'
...m::transformation.new(pt)model.entities.add_instance(defn, t...
^
(eval):178: syntax error, unexpected tIDENTIFIER, expecting '}'
...ities.add_instance(defn, tr)pt.x=pt.x+1.m}
^>
(eval):178]

Ive copied and pasted every line of code in one by one in the ruby console but keep getting a syntax error when i put this line in

newdefs.each{|defn|tr=Geom::transformation.new(pt)model.entities.add_instance(defn, tr)pt.x=pt.x+1.m}

All the definitions are have been added, just cant seem to get any instances into the model?
Can you shed any light for me - sorry this keeps coming back to you.
Thanks
Sam

[TIG]

You can't have multi-line blocks in the Ruby Console [expect perhaps on a MAC?].
Making it as one line you need ' ;' where the newline would be... so

newdefs.each{|defn|tr=Geom;;transformation.new(pt)model.entities.add_instance(defn, tr)pt.x=pt.x+1.m}

should become

newdefs.each{|defn|tr=Geom;;transformation.new(pt);model.entities.add_instance(defn, tr);pt.x=pt.x+1.m}

NOTE this is all in one line but the code-pane 'wraps' it...
Then it should work...

[samyell77]

Hi TIG,

Still no dice Im afraid!

%(#FF0000)[skpfolderpath='C:\Users\sam.morris\Documents\TEST COMPS'
C:\Users\sam.morris\Documents\TEST COMPS
model=Sketchup.active_model
#Sketchup::Model:0xca07ab0
ents=model.active_entities
#Sketchup::Entities:0xe967bbc
defs=model.definitions
#Sketchup::DefinitionList:0xe84a5a4
skps=[]
[]
Dir.foreach(skpfolderpath){|f|skps << File.join(skpfolderpath, f) if File.extname(f).downcase==".skp"}
nil
skps.each{|skp|defn=defs.load(skp)}
["C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal A.skp", "C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal B.skp", "C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal C.skp", "C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal D.skp"]
pt = Geom::Point3d.new(0,0,0)
Point3d(0, 0, 0)
newdefs = defs.to_a[(defs.length - skps.length)..-1]
[#Sketchup::ComponentDefinition:0xe6e0704, #Sketchup::ComponentDefinition:0xe6e0614, #Sketchup::ComponentDefinition:0xe6e05d8, #Sketchup::ComponentDefinition:0xe6d9634]
newdefs.each{|defn|tr=Geom::transformation.new(pt);model.entities.add_instance(defn, tr)pt.x=pt.x+1.m}
Error: #<SyntaxError: (eval):178: compile error
(eval):178: syntax error, unexpected tIDENTIFIER, expecting '}'
...ities.add_instance(defn, tr)pt.x=pt.x+1.m}
^>
(eval):178]

Am I missing a step - am working on PC and am pasting each line into ruby console one at a time... but still get this unexpected tIDENTIFIER error? Im afraid I can't troubleshoot this at all with my very limited ruby knowledge. Any ideas?

[samyell77]

[hr]just spotted that I was missing the ';' in this line just before 'pt.x' but have added it in, re-run and am now getting a different error (have highlighted the code in red this time and the result from the ruby console in blue...)

skpfolderpath='C:\Users\sam.morris\Documents\TEST COMPS';model=Sketchup.active_model;ents=model.active_entities;defs=model.definitions;skps=[;Dir.foreach(skpfolderpath){|f|skps << File.join(skpfolderpath, f) if File.extname(f).downcase==".skp"};skps.each{|skp|defn=defs.load(skp)}]
["C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal A.skp", "C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal B.skp", "C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal C.skp", "C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal D.skp"]

pt = Geom::Point3d.new(0,0,0)
Point3d(0, 0, 0)

newdefs = defs.to_a[(defs.length - skps.length)..-1]
[#Sketchup::ComponentDefinition:0xeb0e344, #Sketchup::ComponentDefinition:0xeb0e254, #Sketchup::ComponentDefinition:0xeb0e218, #Sketchup::ComponentDefinition:0xeb06270]

newdefs.each{|defn|tr=Geom::transformation.new(pt);model.entities.add_instance(defn, tr);pt.x=pt.x+1.m}
%(#0000BF)[Error: #<NoMethodError: undefined method transformation' for Geom:Module> (eval):181 (eval):181:in each'
(eval):181]

[samyell77]

Also added ';' to all the lines of code to make complete blocks so I could paste a whole block in in one go rather than line by line - hope this is ok...

[Dan Rathbun]

Another cap error on the same line:

newdefs.each{|defn|tr=Geom;;transformation.new(pt);model.entities.add_instance(defn, tr);pt.x=pt.x+1.m}

should be:

newdefs.each{|defn|tr=Geom;;Transformation.new(pt);model.entities.add_instance(defn, tr);pt.x=pt.x+1.m}

class (and module,) identifiers are actually constants so start with a capital character.

[TIG]

Thanks Dan, I missed the [tT]ransformation typo in his code I copy/pasted.....
The error messages are pretty good at telling you what is wrong

[samyell77]

TIG, Dan,
Yee haaa! It works! Thank you both so much - TIG, thanks for being patient with a ruby luddite and Dan, thanks for finding the final missing piece of the puzzle. You have both been a huge help.

[samyell77]

Grrr - curses, they load in but something is going wrong Im afraid.

Copied and pasted code below - no error messages appearing but the components aren't all there and some of them are broken up / exploded it seems. I have 4 components that Im loading in this case (PLAT Carpet Amber FULL Diagonal A, B, C & D) but when I run the code I only get C and D as complete components and then I get two groups of objects that are broken up?

Ive attached a screen grab - the bottom row is the components as they appear after running the lines of code. The top row is the components loaded from the components pallet.

Ive also pasted the code from the console below...

skpfolderpath='C:\Users\sam.morris\Documents\TEST COMPS';model=Sketchup.active_model;ents=model.active_entities;defs=model.definitions;skps=[];Dir.foreach(skpfolderpath){|f|skps << File.join(skpfolderpath, f) if File.extname(f).downcase==".skp"};skps.each{|skp|defn=defs.load(skp)}
["C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal A.skp", "C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal B.skp", "C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal C.skp", "C:\Users\sam.morris\Documents\TEST COMPS/PLAT Carpet Amber FULL Diagonal D.skp"]
pt = Geom::Point3d.new(0,0,0)
Point3d(0, 0, 0)
newdefs = defs.to_a[(defs.length - skps.length)..-1]
[#Sketchup::ComponentDefinition:0xe60a9d8, #Sketchup::ComponentDefinition:0xe60a8e8, #Sketchup::ComponentDefinition:0xe60a8ac, #Sketchup::ComponentDefinition:0xe603908]
newdefs.each{|defn|tr=Geom::Transformation.new(pt);model.entities.add_instance(defn, tr);pt.x=pt.x+1.m}
[#Sketchup::ComponentDefinition:0xe60a9d8, #Sketchup::ComponentDefinition:0xe60a8e8, #Sketchup::ComponentDefinition:0xe60a8ac, #Sketchup::ComponentDefinition:0xe603908]

Any further thoughts or help with this much appreciated.
Thanks

[TIG]

Your imported components contain subcomponents or groups - these have definitions.
The current code simply takes the definitions list, and because definitions are added onto the end it it assumes the last 4 [say] are the 4 components you loaded, but of course there are more than that because the subcomponent/groups are all extra definitions too - so you only get the first few and not all.
We can recode so that we make an array of the definitions before the import and then an array after an find the difference, skipping groups... that way you only get new components added as instances... I've also added a sorting routine to add them in order...

model=Sketchup.active_model;
defs=model.definitions;
olddefs=defs.to_a;
skpfolderpath='C;\Users\sam.morris\Documents\TEST COMPS';model=Sketchup.active_model;ents=model.active_entities;
skps=[];
Dir.foreach(skpfolderpath){|f|skps << File.join(skpfolderpath, f) if File.extname(f).downcase==".skp"};
skps.each{|skp|defn=defs.load(skp)};
newdefs = defs.to_a - olddefs;
newdefsnames=[];
newdefs.each{|defn|next if defn.group? or defn.image?; newdefsnames << defn.name};
newdefsnames.sort!;
pt = Geom;;Point3d.new(0,0,0);
newdefsnames.each{|name|tr=Geom;;Transformation.new(pt); model.entities.add_instance(defs[name], tr); pt.x=pt.x+1.m};

Hope this helps [untested...]

[samyell77]

As we say in the west country "Thats the badger mi babber!!"

Works a treat now TIG - brilliant!

Thanks again for ALL your help with this and you patience