Arrange component names

[slbaumgartner]

@tt_su said:

Why do you need to rename all the other components to place a new component?

I'd bet that the numeric prefix has external ordering significance (like number 053 has some relation to 054) so the existing higher numbered parts have to be pushed up when a new one is inserted into the list.

[siim11s]

@tt_su said:

The order is in no guarantied order. It doesn't change when definitions are modified.

Ok, thanks.

@tt_su said:

I'm afraid it's a bit unclear to me.
Are you trying to rename all definitions?

Not exactly, I'm trying to insert a new component in the middle of a name-sorted list, while keeping the numbering sequence.

@tt_su said:

What is the expected result?

List of components where the first 3 characters of the component name determine the component's position in the list.

@tt_su said:

Why do you need to rename all the other components to place a new component?

I want to place a component in position 52 in the list, so I name it "052 - ...", but there already is a component which name starts with "052" so I need all existing component names to increase their 'index' by 1.

Further:

I'm working on a wooden house frame and I need a way to get the components exported in a certain order. I have numbered the 'parts' in order of 'appearance'.

• e.g. the part you need first would be "001 - Bottom plate part - 45x95x6000". Where the "001" is the 'index' for the part and the rest is a description of it.

So, If I at some point realise that I need to insert another piece of timber, I would create a new component. But I need to place it in a certain position in the components list (which is sorted by name). If part number 052 would be a wall stud of a certain dimension and I needed to insert a new stud of another dimension next to it I want the part to be number 051 or 053 - doesn't really matter which as long as they are close.

If the component count at that point is 200, I'd need to increase the 'index' number for all components 053-200 by one.

Is this any clearer?

[siim11s]

@slbaumgartner said:

I'd bet that the numeric prefix has external ordering significance (like number 053 has some relation to 054) so the existing higher numbered parts have to be pushed up when a new one is inserted into the list.

Exactly : )

[slbaumgartner]

The core issue here is to realize that there is a difference between the ordering in which items are stored in a Ruby container as they are added (which may be seemingly random - e.g. in a hash - or may be based on some optimization of the internal structure) vs the order in which they are presented by some UI or processed by code. If the order matters for the latter purposes, you should create an Array using #to_a and then sort the Array using whatever ordering rule you like.

[sdmitch]

@siim11s said:

@slbaumgartner said:

I'd bet that the numeric prefix has external ordering significance (like number 053 has some relation to 054) so the existing higher numbered parts have to be pushed up when a new one is inserted into the list.

Exactly : )

Here is some code for you to test. It seems to do what I understand you want.

mod = Sketchup.active_model
ent = mod.active_entities
sel = mod.selection
cds = mod.definitions.reject{|cd|cd.group?||cd.image?}
prefix=('%03d' % cds.length)
new=sel.first;new_name=prefix+' - '+new.definition.name
inp=UI.inputbox(["New Name;"],[new_name],"Rename #{new.definition.name}")
if inp
 prefix,name=inp[0].split(' - ')
 cds.each{|cd|
  if cd.name.index(' - ')
   p,n=cd.name.split(' - ')
   if p.to_i >= prefix.to_i
    cd.name=p.next+' - '+n
   end
  end
 }
 new.definition.name=inp[0]
end

[siim11s]

@sdmitch said:

Here is some code for you to test. It seems to do what I understand you want.

Yes.. almost. Not quite the way I imagined it though.
It also seems to add "#1" at the end of some(?!) of the changed names.

I'd prefer it wasn't dependent on the " - " in the name, rather that the first 3 characters are numbers. And I'd like to be able to sort through the whole list of numbered components in the model.. looking for consistency errors and correct them if needed. But I'll try to understand it better. Thanks!

@slbaumgartner said:

The core issue here is to realize that there is a difference between the ordering in which items are stored in a Ruby container as they are added (which may be seemingly random - e.g. in a hash - or may be based on some optimization of the internal structure) vs the order in which they are presented by some UI or processed by code. If the order matters for the latter purposes, you should create an Array using #to_a and then sort the Array using whatever ordering rule you like.

Yes, that's where I first got stuck. I have a few Ideas I can try now, thanks for the help so far.

[sdmitch]

@siim11s said:

Yes.. almost. Not quite the way I imagined it though.
It also seems to add "#1" at the end of some(?!) of the changed names.

I'd prefer it wasn't dependent on the " - " in the name, rather that the first 3 characters are numbers. And I'd like to be able to sort through the whole list of numbered components in the model.. looking for consistency errors and correct them if needed. But I'll try to understand it better. Thanks!

The "#1" usually only occurs when you give the same name to two definitions which is why I don't name the selected component until the end.

Using the " - " seemed to be the safest option given your naming sample.

cdn = mod.definitions.map{|cd| cd.name}.sort

will give you a sorted array of the definition names.

[MSP_Greg]

Try the following (based on SDMitch's code)

mod = Sketchup.active_model
ent = mod.active_entities
sel = mod.selection
cds = mod.definitions.reject{|cd|cd.group?||cd.image?}
prefix=('%03d' % cds.length)
new=sel.first;new_name=prefix+' - '+new.definition.name
inp=UI.inputbox(["New Name;"],[new_name],"Rename #{new.definition.name}")
reInc = /^(\d{3})(.+)/
if (reInc.match(inp[0]))
  new.definition.name = inp[0]
  iPre = $1.to_i
  iCD = 0
  cds.each { |cd|
    if (reInc.match(cd))
      iCD = $1.to_i + 1
      cd.name = "%03d#{$2}" %iCD if iCD > iPre
    end
  }
end

As long as the cd name begins with three numbers...

Note - no testing for prefixes greater than 999, and no testing for duplicate names after the increment.

Greg

[sdmitch]

@msp_greg said:

Try the following (based on SDMitch's code)

> mod = Sketchup.active_model
> ent = mod.active_entities
> sel = mod.selection
> cds = mod.definitions.reject{|cd|cd.group?||cd.image?}
> prefix=('%03d' % cds.length)
> new=sel.first;new_name=prefix+' - '+new.definition.name
> inp=UI.inputbox(["New Name;"],[new_name],"Rename #{new.definition.name}")
> reInc = /^(\d{3})(.+)/
> if (reInc.match(inp[0]))
>   new.definition.name = inp[0]
>   iPre = $1.to_i
>   iCD = 0
>   cds.each { |cd|
>     if (reInc.match(cd))
>       iCD = $1.to_i + 1
>       cd.name = "%03d#{$2}" %iCD if iCD > iPre
>     end
>   }
> end
> 

As long as the cd name begins with three numbers...

Note - no testing for prefixes greater than 999, and no testing for duplicate names after the increment.

Greg

Greg,

Tried your code and found two problems.

1. if(reInc.match(cd)) needs to be if(reInc.match(cd.name))

2. the prefix of the new name entered gets incremented as well. the new.definition.name = inp[0] statement needs to be the last thing done in the if (reInc.match(inp[0])) section.

[MSP_Greg]

siim11s,

The previous code I posted didn't allow for name collisions. Below code should allow for it. Also added a few comments...

# reInc checks for match of three digits at beginning of string,
# loads digits into $1, rest of name into $2
reInc = /^(\d{3})(.+)/

if (reInc.match(inp[0]))
  # sort reverse so name colisions won't occur
  cds.sort! { |a,b| b.name <=> a.name }

  # initialize loop variables
  iPre = $1.to_i
  iCD = 0

  cds.each { |cd|
    if (reInc.match(cd.name))
      iCD = $1.to_i + 1
      # since we're reverse sorted, break when we reach low numbers
      break if iCD <= iPre
      cd.name = "%03d#{$2}" %iCD
    end
  }
  new.definition.name = inp[0]
end

# for testing, use below to resort & output new names
cds.sort! { |a,b| a.name <=> b.name }
cds.each { |cd| puts cd.name }

Greg

[MSP_Greg]

SDMitch (Mitch?),

@sdmitch said:

Tried your code and found two problems.

1. if(reInc.match(cd)) needs to be if(reInc.match(cd.name))

Thanks for the catches. I edited & corrected the second post. I tested mine with a string array, not an array of cd's. Hence, no name prop.

@sdmitch said:

2. the prefix of the new name entered gets incremented as well.

That's why you had the new cd name assign at the end of the loop. That's why I shouldn't change code after I've tested it...

Thanks,

Greg