Web dialog on a Mac

jeff hammond

just tried it on Lion (os x 10.7.5) with su2013 and su8.. i'm getting the http error & cannot reach web service error..

i'm on the same wifi network as my mavericks laptop using the same 1.0.6 rbz.. i checked and double checked my username & pword were edited properly in the txt file..

the mavericks computer connects and the lion macpro doesn't.

[just in case, i had some OS updates which needed install on lion.. a security update and a java update.. installed those, repaired permissions, rebooted... same problem.. but at least i got that computer up to date ..or as up to date as 1,1 macpro can be without hacking it ]

slbaumgartner

@jeff hammond said:

@slbaumgartner said:

I registered on your site, edited the info into the defaults.txt, and voila, got this:

hmm.. strange.. a few of us are testing in the stairMaker thread and not getting that far.. we're using mavericks and 2013make or su8.. what OS / SU are you testing on?

[EDIT] just tried it on su8pro / mavericks and i'm still getting a window with all blank fields/menus.. i'll try it on my other computer running lion in an hour or so.

That was on SU 8 Free, MBPr, Mavericks.
Steve

slbaumgartner

@jeff hammond said:

@slbaumgartner said:

I registered on your site, edited the info into the defaults.txt, and voila, got this:

hmm.. strange.. a few of us are testing in the stairMaker thread and not getting that far.. we're using mavericks and 2013make or su8.. what OS / SU are you testing on?

[EDIT] just tried it on su8pro / mavericks and i'm still getting a window with all blank fields/menus.. i'll try it on my other computer running lion in an hour or so.

I just tried using SU 2013 Make (still on Pro trial period) on MBPr, Mavericks, and that worked too. This was a clean (no other plugins) install of 2013 Make, but for my previous test on SU8 Free I hadn't disabled anything.

For me, 1.0.6 was the first installation of the stair maker. Any chance previous installs left something behind that is interfering on your computer?

Another thought - could this be a race condition? My MBPr is relatively fast, and once before driven and I got different results on another script evidently because his machine was slower than mine...

driven

'that' error with updated txt file
then
deleted all and reinstall...

show 1
loaded 1
cb1 complete
closed 1
Error; #<NoMethodError; undefined method `join' for #<Enumerator; ["Housed", "Sawtooth", "None"];collect>>
/users/johns_imac/library/application support/sketchup

driven

@slbaumgartner said:

Another thought - could this be a race condition? My MBPr is relatively fast, and once before driven and I got different results on another script evidently because his machine was slower than mine...

and, another...

could the server being a lot further away from London UK have an effect?...

or are we all on the same WebKit version?

navigator.userAgent

< "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_9_1) AppleWebKit/537.73.11 (KHTML, like Gecko) SketchUp/13.0 (Mac; Safari)"

john

jeff hammond

@slbaumgartner said:

I just tried using SU 2013 Make (still on Pro trial period) on MBPr, Mavericks, and that worked too. This was a clean (no other plugins) install of 2013 Make, but for my previous test on SU8 Free I hadn't disabled anything.

For me, 1.0.6 was the first installation of the stair maker. Any chance previous installs left something behind that is interfering on your computer?

Another thought - could this be a race condition? My MBPr is relatively fast, and once before driven and I got different results on another script evidently because his machine was slower than mine...

probably not a race.. i've mostly been trying it on my mbp.. 2.66GHz i7.. i don't think apple makes a faster one.
(albeit mine is arrandale and i guess i can't straight compare clock speed to ,say, 2.6 haswell but still...)

also, when i tried 1.0.6 on lion last night, it was the first time i put stairmaker on that computer.

driven

@Jeff,

It's making the spiral here, after I manually deleted [ file and folder ] and then re-installed [ .rbz ] into v2013 and re-edited the text file...

john

jeff hammond

@driven said:

@Jeff,

It's making the spiral here, after I manually deleted [ file and folder ] and then re-installed [ .rbz ] into v2013 and re-edited the text file...

tried all that (manual deletion etc.) even made my own txt file from scratch (well- copy/paste) just to make sure no versioning info was sticking during the overwrites i'd done previously (and also realized by doing that, i could quit going to my emails to find my password for each new version )

just tried something else on a whim.. switched my model units to decimal-meters instead of architectural-inches:

Screen Shot 2014-02-07 at 11.05.11 AM.png

switched the units back and tried again.. nothing.

so i'm pretty sure the problem lies in this realm.. has all this testing been because of a typo of sorts?
sigh

driven

maybe the test to change units is failing on Ruby other than 1.8.7, macs use 1.8.5

Garry K

I use decimal millimeters with 3 decimals of precision or greater
I have tested with decimal inches with 3 decimals of precision or greater
I have also tested with fractional inches at 1/64" precision.

But I haven't tested using all the different choices.
The defaults.txt file supports mm and decimal inches for defaults.
Sketchup should convert these values to the appropriate units.

There is a sketchup bug that will have trouble with fractions in inches.
This problem also exists with the built in inputbox.

Garry K

Also - Stair Maker doesn't support unit switching after you have used it in the session. However it should honor switching units prior to running the stair maker.

jeff hammond

@garry k said:

Also - Stair Maker doesn't support unit switching after you have used it in the session. However it should honor switching units prior to running the stair maker.

all i know is this.

i open a fresh model with Beginning Template - Feet and Inches
stairMaker doesn't work

i open a fresh model with Beginning Template - Meters
stairMaker does work

slbaumgartner

@jeff hammond said:

@garry k said:

Also - Stair Maker doesn't support unit switching after you have used it in the session. However it should honor switching units prior to running the stair maker.

all i know is this.

i open a fresh model with Beginning Template - Feet and Inches
stairMaker doesn't work

i open a fresh model with Beginning Template - Meters
stairMaker does work

Confirm that feet+inches does not work, mm does, meters does, fractional inches does. However, after returning to fractional inches from the others without restarting Sketchup, parts of the staircase don't get drawn (is that what you meant by "doesn't support after you have used it in the session"?):

Screen Shot 2014-02-07 at 12.16.23 PM.png

Screen Shot 2014-02-07 at 12.16.40 PM.png

driven

I think @Jeff has found the issue... [ 10 points to you, good sir ]

Engineering Feet Template
2014-02-07 05.23.33 pm.png

slbaumgartner

This raises an interesting question: does feet&inches also fail on Windows? In other words, is this really a Mac issue at all, or did we just get unlucky (or, if you are trying to eliminate bugs, lucky)?

jeff hammond

@driven said:

I think @Jeff has found the issue... [ 10 points to you, good sir ]

lucky find based around me thinking steve was british.. as in- what could be different on their computers compared to mine? units!

Garry K

Thanks guys

I have now tested with Decimal Feet, Engineering Feet and Architectural Feet.
All of the 3 models that are feet create an error.

All the rest of the models work.
This holds true for SU 7, SU 8 and 2013 for Windows.

The error is a bit misleading as it appears as a script error on line 1 char 416
The interesting part is that the html script doesn't have that many characters on line 1

This may be where I pass in a big string, and need to parse it. If that is the case then the defaults.txt file has a value that does not translate over to feet.

driven

@garry k said:

The error is a bit misleading as it appears as a script error on line 1 char 416
The interesting part is that the html script doesn't have that many characters on line 1.

I thought .rbs files where a single line?

Garry K

this is a redirect from source to html.
When you view source - the html looks properly formatted.

It appears to be a script error for the web dialog.

Regardless - I'll work on narrowing it down.

driven

@Steve found the problem, days ago, but we didn't know what it was...

with the Eng Feet template the [ " ] designator is attached to the body tag in 'view source' and I get a js error

if I close the dlg, switch to metric [still same session ] I get no errors in the js and the body tag is normal...

john