Dart Board
-
A bit of fun while watching the darts... cant say i even like darts but with a pint in hand this came out not to bad, let me know your thoughts
kev
-
Nice image!! One thing that stands out is the board needs more segments. It is too faceted for a close shot like this.
The materials look really nice!
Scott
-
might want to add a few more details if there isnt a concern on size...
- staples to hold the wire mesh onto the board
- connect the numbers to the outer ring so they aren't floating 9,14
my thought... the blur is nice, but overkill in the distance. might want your focal point to be where the dart points have entered the board. they are a bit blurry now, so the most in focus portion is the number 9 and green portion of the board next to 9. just doesnt flow well and makes me want to look away after a few seconds.
i agree with the earlier comment of the board being 2d ish. give it some depth with maybe a metal ring. around 9/16" should be close.
hope it helps
chris<pixelmonkey>:D -
hey
thanks all to the feedback, and sure the depth and focus can be changed from the depth map i used , and agreed on the outer ring, i hadnt noticed that, must be from looking at it for so long. The wire is all piped using pipe along path , i had used a thicker pipe but seemed to give an unrealistic result, but shall work on another image, i enjoy this sort of stuff.
The textures had all been created in PS and based from eye watching the darts on the tv.
thanks for the feedback once more, shall update when the next images are ready
kev
Advertisement