Using an observer to delete a screen note

Jim

The ShadowInfo is part of the model, so when you open an existing model or start a new model, you need to attach your observer to the new ShadowInfo.

You can automate this by using an AppObserver to notify the script when a model is opened or created, and attach the ShadowInfoObserver at that time.

Note on Macs, you can have more than a single Model open. Not so on Windows where there is always only a single Model available.

Dan Rathbun

Wouldn't this be a perfect job for the FrameChangeObserver ??

Jim

I don't think the FrameChangeObserver works either when exporting an animation.

Chris Fullmer

That's interesting. I've never noticed that observer (I tend to stay away form them after hearing all of Thom's problems with them). That seems like it would be a great one to use here if only it worked during animation export.

Chris

pvbuero

Hello,

it's a pity that I read this post just now, when I finished my little plugin using the shadowinfo_observer to achieve exactly what danbig described. Display the Shadowtime for different shading situations.
My Plugin works perfectly. I was proud of it until I tried an animation export
Is this problem solved by now?
It seems not very sophisticated to me, to write notes on every page which are hidden when another page is displayed...
is there no other way ?

Matthias

Dan Rathbun

@chris fullmer said:

That's interesting. I've never noticed that [FrameChangeObserver observer] ...

Yes that is because is one of the API missing class boo-boos. It IS mentioned within the API, in passing.
Pages.add_frame_change_observer
Pages.remove_frame_change_observer

It was featured (documented) in the Sketchup API BlogSpot:
Dynamic Components that react to scene (aka page) changes

('scenes.rb') Code properly formatted (by Todd Burch) at:
http://www.smustard.com/forum/viewtopic.php?f=9&t=25

It basically only has one event callback:
frameChange( fromPage, toPage, percent_done ),
the intialize method, plus any custom method(s) you need inside to keep your code readable and organized.

@chris fullmer said:

That seems like it would be a great one to use here if only it worked during animation export.

I guess the animation export is a manual 'built-in' C++ side plugin? And as such all Ruby processing stops? (..similar to what happens when the App Modal 'Preferences' dialog opens.)
.. or is it a special way of running an Animation object?

danbig

I, for one, have decided that I have a knack for attempting the most complicated tasks as my "test project" in a new area.

Matthias: I'm sorry that you got so far before realizing the issue with the shadowinfo_observer. This is a lesson that I've learned too many times: test code at the smallest possible snippets, and verify it's functionality individually before putting it all together into a larger code block.

pvbuero

@danbig said:

I, for one, have decided that I have a knack for attempting the most complicated tasks as my "test project" in a new area.

danbig,
It's dawning on me that this might be true for me too

I try the approach with one note per page. Hopefully this will be more successful

Matthias

Chris Fullmer

It really is not all that difficult to make your script export a series of jpgs that can then turned into a movie (its more dificult for the user though ). But if you feel that is an option, you could try writing your own export method and then you can update the screen text for each frame easily that way.

Chris

pvbuero

@chris fullmer said:

It really is not all that difficult to make your script export a series of jpgs
Chris

Chris,

can I also export directly into an avi file somehow ?
To make it a bit easier for the user ...

Matthias

danbig

@chris fullmer said:

It really is not all that difficult to make your script export a series of jpgs that can then turned into a movie (its more dificult for the user though ). But if you feel that is an option, you could try writing your own export method and then you can update the screen text for each frame easily that way.

Chris

"Difficult" being a relative term here.

Chris Fullmer

Oh I agree. But really exporting an image is not that hard. For me, the hardest part BY FAR was getting it recognize the location I was trying to save it. I really struggle with ruby and files/paths. Its is remarkably painful. But you might be able to use the save dialog box and let the user supply the path easier than hard coding like I think I did.

Chris

Dan Rathbun

@pvbuero said:

@chris fullmer said:

It really is not all that difficult to make your script export a series of jpgs

can I also export directly into an avi file somehow ?
To make it a bit easier for the user

A thot...

.. I wonder if MS MediaPlayer or MovieMaker or PhotoStory could be run in batch mode, to stitch a collection of image files (in a folder,) into a AVI, by calling the exe with command line parameters.

Many of the old SlideShow executables would do similar for a slideshow. (Which is now built into XP.)

If not, perhaps out there somewhere, is a command line "AVI maker" executable that would do the job.

danbig

Call me unambitious, but I'm back to the strategy of placing the screen note on each scene, and hiding it on all the others. It would work for my workflow, and it seems digestible for me.

I could then use the standard "export to animation" function to either jpg or avi, and (I think) it would come out as expected.

Chris Fullmer

I really don't blame you, that is a sensible way to do it I think.

@Dan R., there is a free command line encoder called mencoder that will take a series of still images and turn it into any video format. It is Win, Mac, Linus capable too. I have thought to write a ruby to test out its capabilities half a dozeon times, and jhust never fully sat down and done it. If anyone ever does look at it, it would be awesomw if they posted their code snippet that interacts with that command line encoder.

Chris

pvbuero

@danbig said:

Call me unambitious, but I'm back to the strategy of placing the screen note on each scene, and hiding it on all the others. It would work for my workflow, and it seems digestible for me.
I could then use the standard "export to animation" function to either jpg or avi, and (I think) it would come out as expected.

I made it that way and it works:

 
shadowtime_on_screen = [sunrise..sunset]

 for hour in sunrise..sunset
  time = Time.gm(2010,month,day,hour,minute,00)
  shadowinfo["ShadowTime"]= time
  shadowinfo["DisplayShadows"]= true 
  shadowtime_on_screen[hour] = Sketchup.active_model.add_note (shadInf.shadowtimetxt,0.1,0.2)
  shadowtime_on_screen[hour].hidden = true
 end
  for hour in sunrise..sunset
   time = Time.gm(2010,month,day,hour,minute,00)
   shadowinfo["ShadowTime"]= time
   shadowtime_on_screen[hour].hidden = false
   page = Sketchup.active_model.pages.add time.strftime("%d %b %H;%M Uhr")
   shadowtime_on_screen[hour].hidden = true
   page.delay_time= 0
   page.transition_time= 3
 end

First I create all the notes on the screen and hide them, then I unhide one by one and create the corresponding pages.

My next step will be to allow steps which are different from one hour... and as I learnd here I have to deal with jquery (sigh) to enter the start and the end time...

Matthias

danbig

@unknownuser said:

I made it that way and it works:

 
shadowtime_on_screen = [sunrise..sunset]

 for hour in sunrise..sunset
  time = Time.gm(2010,month,day,hour,minute,00)
  shadowinfo["ShadowTime"]= time
  shadowinfo["DisplayShadows"]= true 
  shadowtime_on_screen[hour] = Sketchup.active_model.add_note (shadInf.shadowtimetxt,0.1,0.2)
  shadowtime_on_screen[hour].hidden = true
 end
  for hour in sunrise..sunset
   time = Time.gm(2010,month,day,hour,minute,00)
   shadowinfo["ShadowTime"]= time
   shadowtime_on_screen[hour].hidden = false
   page = Sketchup.active_model.pages.add time.strftime("%d %b %H;%M Uhr")
   shadowtime_on_screen[hour].hidden = true
   page.delay_time= 0
   page.transition_time= 3
 end

Is this code ready to execute through the console or webconsole? I get an "undefined local variable" error for sunrise when I evaluate it.

What I'd like to do is merge your code, above, with this script (Chris essentially wrote this, and I have simply tweeked it to suit my needs):
I'm not as concerned with sunrise and sunset, if those values are used in your script. I prefer to set the start and stop times myself, and create the screen notes associated with the times and intervals I have chosen.

model = Sketchup.active_model
si = model.shadow_info
ps = model.pages
si["DisplayShadows"]= true
#set the year, month, day, and time of first shading scene as follows; (year,month,day,hour,min,sec)
t = Time.gm(2010,"dec",1,9,0,0).to_i


#set number of days to repeat
31.times do |day|
si["ShadowTime_time_t"]=t
page = ps.add
#set scenes to save camera position (true or false)
status = page.use_camera=false
#set scene transition time to 0 from PM of previous day to AM of next day
page.transition_time = 0.0
#set hours from first scene for day until second scene for the same day (sec*min*hours)
t= t+(60 * 60 * 6)
si["ShadowTime_time_t"]=t
page = ps.add
status = page.use_camera=false
page.transition_time = -1
#set hours from second scene for day, until first scene of next day (sec*min*hours)
t= t+(60 * 60 * 18)
end

Dan Rathbun

@danbig said:

Is this code ready to execute through the console or webconsole?
NO.. because it is NOT wrapped in a module. When you run code like this in the console (or webconsole,) it runs INSIDE class Object. EVERYTHING in Ruby is a subclass of class Object, and inherits all of it's methods, constants and most important, it's local variables. (Say "Reference clashes, boys and girls!")
When you declare a sunrise var (or any other var using a common word like start and stop,) in the console (ie, in Object,) you run the risk of clashing (overwriting,) a var of the same name, by another script (if it is also not module wrapped.)

@danbig said:

I get an "undefined local variable" error for sunrise when I evaluate it.
You'd get the same for sunset.
It's obviously a snippet from a larger script, where these local vars are predefined, most likely grabbing them from the model's ShadowInfo settings.

Stay within YOUR namespace, YOUR namespace is your friend. It protects your code from the rest of the world, and visa versa.
Don't have a namespace?
Let's invent one, how about Danbig ?? (..you can chose another, but for example's sake..)

In EACH and EVERYONE of your Ruby script files, all your code will be wrapped inside a Danbig module block, like:
` module Danbig

code goes here.

end # Danbig`
Then for each separate plugin, you create a submodule inside YOUR Danbig namespace, so that YOUR plugins do not clash with each other. Like:

module Danbig
  module ShadowAnim
    #
    # code goes here.
    #
  end # ShadowAnim
end # Danbig

The beauty is that module and class definitions can span across multiple files (but method defs cannot, a method def will totally redefine any method that is already defined***.)

*** This is why you should NOT define methods in the console (inside Object,) as they will often end up redefining someone else's method, or worse (and it's happened,) one of the important Ruby methods of Object or Kernel [which is mixed-into Object,] causing problems for EVERYONE.)

Anyhow.. you'd refer to your animation start method as:
Danbig::ShadowAnim.start
using the **::** scope operator.

Now you don't need $global vars to share settings or info among your plugins. Just create either CONSTANTS, @@class vars or @attributes inside the Danbig module.
Constants can be refered to (in individual plugin submodules,) as Danbig::CONSTANTNAME
For @@ or @ vars you'd make getter and setter methods inside Danbig. It's easy to make @vars with the attr_accessor method.
` module Danbig

setup common @vars for ALL my plugins

attr_accessor(:time,:starttime,:endtime,:danbigmenu) #etc.
endcreates attribute vars: @time @starttime @endtime @danbigmenuand methods: Danbig.time Danbig.starttime Danbig.endtime Danbig.danbigmenu Danbig.time= Danbig.starttime= Danbig.endtime= Danbig.danbigmenu=After attr_accessorthe @vars will all be nil, but you can (below that in code,) set them to an initial value inside the Danbig initialize` method.

Oh! There I go again.. ranting on Namespaces. For more info from some of my other rants...
http://forums.sketchucation.com/viewtopic.php?f=180&t=24356&p=255792#p254458
and beginning post 4 at:
http://groups.google.com/group/sketchupruby/browse_frm/thread/4f22a3ac2c3a8603/4d538051fc7cbf75?lnk=gst&q=File+spanning#4d538051fc7cbf75

pvbuero

it 's just an extract of the script with the part where the notes are added and where the pages are added with the corresponding note unhidden...
My script is far from perfect therefore I'didn't want to post it here.

If you keep in mind, that it's the work of a beginner you can see it here complete:

require 'sketchup'

Sketchup.send_action "showRubyPanel;"

class ShadowInformation
 @@shadowinfo = Sketchup.active_model.shadow_info
 def sunrisetxt
   @sunrisetext = @@shadowinfo["SunRise"].gmtime.strftime("Sonnenaufgang;  %H;%M Uhr")
 end

 def sunsettxt
   @sunsettext = @@shadowinfo["SunSet"].gmtime.strftime("Sonnenuntergang;  %H;%M Uhr")
 end
 def shadowdatetxt
  @shadowdatetxt = @@shadowinfo["ShadowTime"].gmtime.strftime("Tag des Jahres;  %d.%b")
 end

def shadowtimetxt
  @shadowtimetxt = @@shadowinfo["ShadowTime"].gmtime.strftime("Uhrzeit;  %H;%M")
 end
end


UI.menu("Plugins").add_item("Shadowanimation"){create_scenes}

def create_scenes

 shadInf = ShadowInformation.new
 #UI.messagebox shadInf.shadowtimetxt
 @xpos_shadowtime = 0.1
 @ypos_shadowtime = 0.2

 shadowinfo = Sketchup.active_model.shadow_info
 #Stunde des Sonnenauf- und Untergang ermitteln
 von_Stunde = (shadowinfo["SunRise"].gmtime.hour.to_s)
 bis_Stunde = ((shadowinfo["SunSet"].gmtime.hour + 1).to_s)


 # Hier werden die Parameter für die Verschattungsanimation abgefragt
 prompts = ["von-Stunde", "bis-Stunde"]
 defaults = [von_Stunde,bis_Stunde]
 list = ["1|2|3|4|5|6|7|8|9|10|11|12|","12|13|14|15|16|17|18|19|20|21|22|23|24"]
 input = UI.inputbox prompts, defaults, list, "Verschattungsanimation Voreinstellungen"

 sunrise = input[0].to_i
 sunset = input[1].to_i
 minute = 00
 day = shadowinfo["ShadowTime"].gmtime.day
 month = shadowinfo["ShadowTime"].gmtime.month

 shadowtime_on_screen = [sunrise..sunset]

 for hour in sunrise..sunset
  time = Time.gm(2010,month,day,hour,minute,00)
  shadowinfo["ShadowTime"]= time
  shadowinfo["DisplayShadows"]= true 
  shadowtime_on_screen[hour] = Sketchup.active_model.add_note (shadInf.shadowtimetxt,0.1,0.2)
  shadowtime_on_screen[hour].hidden = true
 end
  for hour in sunrise..sunset
  time = Time.gm(2010,month,day,hour,minute,00)
  shadowinfo["ShadowTime"]= time
  shadowtime_on_screen[hour].hidden = false
  page = Sketchup.active_model.pages.add time.strftime("%d %b %H;%M Uhr")
  shadowtime_on_screen[hour].hidden = true
  page.delay_time= 0
  page.transition_time= 3
 end
Sketchup.active_model.add_note (shadInf.sunrisetxt,0.1,0.05)
Sketchup.active_model.add_note (shadInf.sunsettxt,0.1,0.1)
Sketchup.active_model.add_note (shadInf.shadowdatetxt,0.1,0.15)
end

The idea is, that you can choose the starting- and the end-hour and that sunrise-hour and sunset-hour are the default values...

The next step would be the input of a start- and a end-time (instead of only the hour) and a that the time between the scenes could be choosen free. (instead of one hour steps).

Matthias

Dan Rathbun

@pvbuero said:

If you keep in mind, that it's the work of a beginner you can see it here complete:

A few issues I see at first glance:

It's NOT wrapped in a module with YOUR namespace name.

ONLY Ruby base classes should ever be defined at the top level. "Base class" means a generic global class used by the entire Ruby world (not just the Sketchup scripting realm.)

If you only need one copy of the code, it should probably be a module.
But if say (on a Mac where there can be more than 1 model open,) if each model needs it's own 'copy' (called an instance,) then a class is the thing to write (probably within a module that tracks and controls the instances of your class.)
ie:


module Pvbuero
  module ShadowAnimManager
    class ShadowInformation
      # instance methods
    end #class
    # menu setup code
    # other run once code
    def create_scenes
      # code here
    end #def
  end #mod
end #mod

call it as: Pvbuero::ShadowAnimManager.create_scenes
(you can name your submodules whatever you wish, it's YOUR namespace.)