New computer
-
This looks nice...yes?:
They took off an additional $200 just today...how low can you go?!?
Boo...I bet there would be some financial benefit to one of us naming the other if we both bought :`)
-
@unknownuser said:
I would prefer to buy something, plug it in and be done with it. If I have to spend a few extra dollars for that piece of mind I will.
eric,
even if you do not know it, what you want is a mac! your description belies your secret desires. just to whet your appetite i am enclosing 2 mac options. look at the specs.if you want more you can change them before shipping. and the imac price is fantastic.
regards.
![macbook pro 15"](/uploads/imported_attachments/V2q2_macbookpro.png "macbook pro 15"")
![imac 20"](/uploads/imported_attachments/fYuC_imac20quot.png "imac 20"")
-
Edson I agree the mac is a very good alternative and something I personally have been wanting to move across to for quite a while. The thing that always puts me off is that I use Autocad which is not available on Mac. I realise you can run in Bootcamp but I often have Autocad open while using things like PS and SU at the same time.
-
One day you love it, the other you hate it...Moore's law! when shelling out $2000.00 on a "new" rig that will pretty much be redundant in two years.
-
if you think like that solo, you'll never get anywhere though, as long as you dont fork out for an absolute top of the range machine you sould be ok.
All the machines so far look pretty good, so i'd just go for the one that provides your prefered balance between cost and performance.
good luck!
-
I am delighted by new technology, I even eagerly await the singularity...My point is the price one pays to stay ahead of the curve. Personally I build my own rigs, and even though over a period of time the costs pretty much even out, I firstly enjoy the challenge and I get to keep up in smaller bite sizes and more consistantly stay ahead of the curve by upgrading in bits and pieces. The other advantage is when you need to upgrade mobo's and chipsets you normally also get the new RAM standards required for optimal speeds, this leaves you with a bunch of odds and sods that can be used to assemble a less than 'cutting edge' rig for a family member that does not require a 'Mean machine'.
-
@unknownuser said:
Edson I agree the mac is a very good alternative and something I personally have been wanting to move across to for quite a while. The thing that always puts me off is that I use Autocad which is not available on Mac. I realise you can run in Bootcamp but I often have Autocad open while using things like PS and SU at the same time.
dylan,
i agree with you about bootcamp but there are other apps (parallels, for one) that allow you to run both OS without having to reboot to move from mac to windows.
-
Thank you all for the advice so far. Keep it comin'
-
Boofredlay,
Balance your RAM, CPU, Videocard for your needs.The 'CAD expert' at work - who wants mainly AutoCAD, some games (if at home), and other little stuff - and myself - who want SU, Photoshop, maybe some future rendering, and other little stuff - settle on some similar specs.
Keep all the primary hardware manufactured by the same company so it plays together nicely into the future: motherboard, CPU by the same company, like Intel.
2.13 - 3 GHz Dual core Intel Processor
2 GB RAM
8600 GTS (or GT) 512 MB videocard, EVGA is a good brand (note the 8000 series nVidia cards are ready for DirectX 10, but DirectX 10 drivers for things like SU are not. Make sure you direct the videocard software to let the application control the graphics acceleration and/or install DirectX 9 for the time being to make SU happy).
XP Pro (Dell and Nobilis still sell rigs with XP)The guy at work price out a nice Dell machine with those specs and a 20.1 Dell Ultrasharp LCD monitor for less than 1500 USD recently.
I got a refurbished 20.1 Dell Ultrasharp widescreen LCD monitor for 300 USD from the Dell outlet store. That's 100 dollars less than new, but with the same 3 year warranty. Buying a Dell computer creeps me out because I don't like proprietary hardware - I like to control my hardware destiny. But the Dell Ultrasharp monitors are reeallly nice and pretty too.
-
So speaking of computer upgrades
My wife's schedule for classes is closer than she or I thought. She registers next week and is off and running...There is a place in Huntsville where my father had a computer built for him.
Here is their pricing guides:
http://www.northalabamacomputers.com/download.ivnuAnd here is the custom system price sheet:
http://bellsouthpwp.net/n/a/nacahsv/System.pdfI will probably talk with them this week so any additional help would be great, thanks.
P.S. to quote myself from above..."PC with XP.
I want a simple machine with great speed and graphics for SketchUp, SU Podium, Photoshop, Autocad and maybe Revit (which I use at work) also some cool games. And all the basics as well... email, Office..." -
Ok, here are the specs on the computer I just ordered. It should be done Monday. I am having it locally built.Cheers and thanks for all the help, especially you Pete.
-
I am ordering a similar setup (but with 4gb RAM, 500GB Hdd, Geforce 8600GT).
what was the price on your setup ? also if it is ready Monday, can you post some tests/experience ? -
Just under $2300. A hair more than I originally wanted to spend but I have the cash.
I would be happy to do some tests, that is if I have the time. It is about to get hectic at work and I have my Form Fonts obligations as well.
But I will do what I can. -
Seriously, go for a Mac for two simple reasons! It is extremely
reliable and secondly, in 24 months time when you want to upgrade
the Dealer (if you pick the right one) will offer you a decent
trade-in price against a newer shiny Mac! It will be difficult
to get the price of a drink for a 24 month old Dell etc
Dylan, as regards running ACad on the Mac. There are other options
available, Parallels etc. I have not tried ACad on Parallels but
imagine it should work okay. Check this out, http://forum.parallels.com/showthread.php?t=2867Mike
-
Good specs on that machine Boo, let us know how it performs. BTW, make sure the RAM is running in dual channel mode when the machine is up and running. If you got 3x 1GB modules then I don't think it will run in dual channel mode, maybe some other memory config gives yo 3GB and have it run in dual channel mode.
Having the RAM run in dual channel mode speeds things up a little. Use an app like CPU-Z to check this.
-
so, how is the new computer ?
-
I set it up the other night but have not had much time to work with it. Also, as soon as I hooked it up either my router or modem died. I am waiting for the cable company to come out today to fix my internet connection... I am at work now.
-
Ok TBD you wanted an update... the computer is lightning fast, that is until you apply a transparency to a material or go to xray mode. I have tried turning off fast feedback and even turning off hardware acceleration with no success. It appears to be slower than my old machine when in xray mode, however I have not done a side by side yet (my wife is working too).
Any ideas?
-
@unknownuser said:
Ok TBD you wanted an update... the computer is lightning fast, that is until you apply a transparency to a material or go to xray mode. I have tried turning off fast feedback and even turning off hardware acceleration with no success. It appears to be slower than my old machine when in xray mode, however I have not done a side by side yet (my wife is working too).
Any ideas?
Perhaps some nvidia driver issue? 8800GT is fairly fast, but I think whole 8x00 series OpenGL support is ...what to say... a bit lacking. I wonder if the reason is to support Quadro FX sales.
-
I did some trials and tests to see if that phenomenon would happen to me, even in the most minimal way.
I just could not get that result.
In fact I accelerated on x-ray (at least it felt faster, maybe if I used an enormous model I would be able to get a more definite result) and stayed the same on transparency (again with bigger model a clearer result would be possible)
I used an AMD dual core for this test with one 8800 GTX on single display mode. I am not sure if the fact that this rig has force-ware drivers and direct X 10 helps, I cannot mimic your rig as all my machines including my Intel Quads use the new force-ware drivers and DX 10.
Advertisement