Sketchup CNC

d12dozr

That plugin sounds like the cat's meow for makerspaces. I recently got access to a Shopbot via a local makerspace, so I'd be interested. I bet many makerspaces/hackerspaces would be interested in it. Here's a list of them throughout the world: http://hackerspaces.org/wiki/List_of_Hacker_Spaces

EscapeArtist

1 on the Makerspaces. If I ever get some extra $$, my number one purchases are a DIY CNC router kit and/or a Makerbot.

noelwarr

Brilliant!

I've had a look at these shopbots and they are quite simple machines compared to the ones we have at my workplace. This means the postprocessor (This is the part that converts the toolpaths into the text file the CNC machine uses) I have made is a little overkill. On the positive side, it's always easier to downscale that upscale.

SOME GOOD POINTS:

Because the plugin uses attributes to tell the parser "Hey, I'm a toolpath" or "Hey, I'm a hole", it is also posible to have other plugins run ontop of it. You could have one that automatically generates the toolpaths for complex mesh surfaces. Wouldn't that be nice!

The plugin is divided into a few seperate ruby files. One is "postprocessor.rb". I hope this makes it easier for people to edit, modify and make their own.

SOME BAD POINTS:

I am not a professional programmer. The code has no documentation or comments at present. It is not an extension (yet). I'm sure it is full of unorthodox practices. I haven't even designed icons for the buttons (I know which one is which off by heart.)

But then that's why I'm making it open source. So YOU do the work for me How cheeky can you get? The point is it works. Still in beta but check out the stool and chair I made, all from within Sketchup.
https://plus.google.com/u/0/106243199685455140135/posts/X95aEM2G3b1
https://plus.google.com/u/0/106243199685455140135/posts/94dAHb1utfW

OK, please bear in mind I am new to this so I need some help from you guys. I'm usually quite chaotic but I would like to do this right. First off, liscense and sharing.

GPL, BSD...
GIT, google projects, just email...

Any preferences or recomendation? My defaults would be GPL and goole projects.

noelwarr

Hmm... Interest seems to have died down a bit.

Dave R

@noelwarr said:

Hmm... Interest seems to have died down a bit.

Not on my part. I've been on the road for a week with very limited access to the Internet. (Chills, shakes, dry heaves. Maybe I'm addicted.) I came back to a huge pile of work, too. Still, I'd like to see what can be done with this.

voljanko

@noelwarr said:

Hmm... Interest seems to have died down a bit.

Just throw us a bone and the interest will be much bigger

Jim

Noel,

You may also want to check out http://www.phlatforum.com - the owners designed and sell a 3-axis machine and software specifically made for SketchUp. (It looks like they are now designing a 3d printer since the last time I visited.)

prismcnd

I am also keeping a keen eye on this thread

noelwarr

Drum roll please.

I'll be uploading my code this comming weekend (In whatever state its in).

@voljanko: A bone you say. How about a little reflective code. I started out as a kid with pascal and Qbasic. I still find it mind boggling to call functions from themselves. You've just gotta love that OOP style. What a break through.


def gather(target, bundle = self, transformation = Geom;;Transformation.new)
  result = []
  entity = bundle.entity
  if (entity.is_a? Sketchup;;Group) ||
    (entity.is_a? Sketchup;;ComponentInstance) ||
    (entity.is_a? Sketchup;;Model)
    transformation = (bundle.entity.transformation * transformation) if bundle != self
    if target == bundle["type"].to_s + bundle["execution"].to_s
      result.push [bundle, transformation]
    end
    bundle.entities.to_a.each{|ent|
      gathered = gather(target, Bundle.open(ent), transformation)
      if gathered != nil
	result += gathered
      end
    }
  end
  return result
end

voljanko

@noelwarr said:

I started out as a kid with pascal and Qbasic.

I started with the Basic commands written on the rubber buttons of ZX Spectrum

Anyway,we have a Roland cnc router in the office so I can make some tests of your plugin.
Hope it will not cut itself

noelwarr

DISCLAIMER> The following code will not work for you "out of the box". First, you need to edit minivistii.rb to refference the other files correctly. Then you need to know how the four buttons work (see the readme file). Then edit the postprocessor.rb to suit your machine.

If you want to contribute, let me know. There are a few things I should explain about the approach I've taken. The Bundle class also needs to be explained.

If you don't know Ruby I sugest you wait a couple of months for me to improve the script.

Well, as promissed http://code.google.com/p/minivistii/source/browse/#git%2FMiniVistii

Use at your peril.

Mike Lucey

Thanks Noel for putting up your efforts so far. I hope that other programmers will be able to row in and help to get this open source ruby developed to a level that will render it useful.

Mike

noelwarr

Thanks for the encouragement Mike. It's already useful to me . As I mentioned before, Sketchup isn't really meant for CAM. Precisely because of this you can do things with it I have never seen a CAM application do...

With the plugin I can draw a few connected edges, declare it as a toolpath and then copy and paste this operation around my workpiece, stretching, scaling and rotating it as I wish. Very flexible.

Mike Lucey

Yep, I've been using SU since v1 and hardly a week goes by that I don't see some new use it has been adapted for. Maybe not ideally doing the job but still doing the job in some manner.

I wish I could offer actual productive help on this project but my programming skills are 0! Hopefully others will row in and get involved

voljanko

Hello Noel,
I tried to have some g-code from your plugin.
After selecting the 2 vertexes with the 2nd button (the model must be edited to select vertex),all the edges has been colored black.
Then with the 4th button (for generating code) I get this error in the console:
Error: #<NoMethodError: undefined method each' for nil:NilClass> C:/Program Files/Sketchup8/Plugins/minivistii/concepts.rb:191:in initialize'
What goes wrong?
I would like to test the g-code on the simple xyz router to engrave something.What tool and procedure should I select?
Congratulations for the plugin,the code seems to be very well structured.
Hope your plugin will be useful also for others.

noelwarr

Hi there voljanko.
I'm really pleased you're giving it a go. Don't worry, we'll get it up and running in no time. I've had a look at where the error is coming from and I think there is something strange about the way you have declared your toolpath. Hardly surprising considering the fact there are no instructions, no icons and no nothing. I have written a little article in the wiki of the project. Try following those instructions. If you think you've done it right and it's still giving the same error send me your skp file and I'll take a look.

From your error I guess the following is the case. You have a group with a bunch of edges that represent your toolpath. The toolpath however is actually defined by the vertices. If there is a vertex in the group that isn't part of the toolpath the method fails. There are a number of reasons this might happen.

Engraving should be easy enough. Check out this 6 month old post. I think it was about 50 lines of ruby code. It was just an experiment but ever since this project has been bubbling away in my mind. In the photos you can see a sketchup model, the gcode generated from a small script and the finished product.

https://plus.google.com/u/0/106243199685455140135/posts/3rq4Zep9V5b

Thanks again for giving it some time voljanko

voljanko

Jeee,it's working now,I have some g-code!
First I have misunderstood the concept of the toolpath.Your plugin is only accepting lines for toolpath.If I want to declare anything else (shape or body) is giving me that error.
It's a good start.Now I have to check if the commands and coordinates in the code are compatible with the router.
Thank you again for your plugin.
I think it is a good start platform for a standard Sketchup to CNC plugin.

noelwarr

Brilliant!

There is a good chance it won't be compatible with your CNC router. But don't worry, if it isn't, I'll write a simple postprocessor for your machine. A simple postprocessor is what this plugin needs to get others to start tinkering around with it. Let me know how you get on

errror404

I made my own CNC machine using a x2 mini mill... unfortunately, I moved and the machine is still siting at my parent's basement.

I'll keep an eye, but can't contribute testing right now

noelwarr

Oops...

Just realised a problem with the plugin. Workpieces seem to be taking their origin from the model's origin. Should be an easy fix. Don't know why that's happening. Probably a last minute change before I committed and pushed my code. I'll look into it this weekend. Meanwhile, for testing purposes please position your workpiece origins on the model origin. Thanks.