WIP Zeppelin

charly2008

Hi,

I just wanted to introduce my new project. Unfortunately, it is difficult to find detailed plans. I love to make detailed designs. Let's see how far I get.

Karlheinz

Zeppelin Kopie 1.jpg

Zeppelin Kopie 11.jpg

Zeppelin Kopie 111.jpg

Zeppelin Kopie 1 Details.jpg

watkins

Are these of help?

http://www.zeppelinmuseum.de/

http://www.airships.net/lz127-graf-zeppelin/design-technology

http://www.airships.net/lz127-graf-zeppelin

Youtube Video

http://wapedia.mobi/en/LZ_127_Graf_Zeppelin

http://www.zeppelinfan.de/html-seiten/englisch/luftschiff_zeppelin.htm

http://leeds2.emeraldinsight.com/Insight/viewContentItem.do;jsessionid=C8175AEE4DE9D9FB3D9576B4AB937364?contentType=Article&hdAction=lnkpdf&contentId=1677353&history=false

charly2008

Thank you James and Watkins.

The pages are interesting especially Airship.net, many interesting details. I will change a few details and need to add. Especially the horizontal frame I would like to pose as a tubular structure. But I do not yet know how i will do that.

It will take some time until it is finished.

Karlheinz

dolphus

Great start i will follow your progress looks to be an interesting project ....good luck

pilou

Bon courage!

Sekta

Very Impressive I wouldn't know where to start.

Stan

Patrick.H

There are some detailed plans here http://www.highriskadventures.com/airships/lz129/ They certainly helped me with my own Zeppelin project

david_h

Good luck with that one.

I have always loved Zepplins and Dirigibles. slow, lumbering, gentle, full of gas, Tendancy to blow up in people's faces. . . .

They remind me of me.

Here is one I did a while back on a "Zpeed" Modeling challenge. This took about 15 minutes. yours obviously taking a bit longer. IT's Pretty down and dirty, but hey . . .

charly2008

Hi David,

the model looks fine.

I like very detailed constructions, but i must say it is very hard work somtimes. Now i have the Problem how do I make the outer skin? I could redraw each field individually to get a face but this will be a boring job for the whole model.

Karlheinz

michaliszissiou

Nice model.
I'm afraid you have to redraw the outer skin. (select what you need, copy-past in place? make faces then?). I had some very boring time once, a boat model.

charly2008

I would like to upload the model to bring it to disposal to the community but I do not know what free file hosting services to take. Can someone give me some advice. Which is best known?

Karlheinz

charly2008

Hi modelhead,

thanks for your advise. Sometimes we forget the simplest techniques. But now I have a new question. Since I have taken for the skin the diameter of the longitudinal ridge they now are visible in the skin. I would like to enlarge the diameter of the whole skin of an amount of approximately 0.03 meters to make it invisible.

I have tried it with the scale tool but it was not successfull. When I try the values, separated by a semicolon to enter into the VCB they jump back to the old values.

How can I determine exactly to increase the diameter to 34,26 Meters. I would be very grateful for some advice.

Karlheinz

KXI System

@charly2008 said:

I would like to upload the model to bring it to disposal to the community but I do not know what free file hosting services to take. Can someone give me some advice. Which is best known?

Karlheinz

I'm not sure if you already know this but you can upload files if they are not big enough (I'm unsure of the limit), right below your posting window there is this upload tab.
Remus has given a full tutorial on how to upload file (pictures in this case) here
Hope it helps!

charly2008

Thanks KXI system,

the model skp file size is 12MB. The limit for uploading to SCF is about 2MB if i think.

Karlheinz

michaliszissiou

@charly2008 said:

I would like to enlarge the diameter of the whole skin of an amount of approximately 0.03 meters to make it invisible.

Just write 0.03, its working here, in this case just 0.01, it should work.

michaliszissiou

For so many years, I use anglo-american standards on all OSs I'm using (except metric). I've learned this lesson by the hard way.

charly2008

Hi michaliszissiou,

If i use a Point i get the message: invalid scale. The comma works but the semicolon as the delimiter does not work. If i press shift after inserting the first value it jumps back.

I used now caps lock instead of shift and i can input a semicolon. But no matter what values i insert, the diameter jumps from 34,23 to 34.74.

I can not get them to bring value from 34.23 to 34.26.

Karlheinz

Zeppelin Skin.JPG

Zeppelin Skin.skp

charly2008

I used now the tape measure tool for resizing, it works but only with Integers and tenth of a part.
Is there a possibility to work with one hundredth of a part?

charly2008

Hi,

here the finalized model. Those interested can download the model here:

Download-Url: http://www.speedshare.org/download.php?id=55B5E3F711

david_h

oh the humanity! Very Nice~!