Green Toaster's Car Sketches

boofredlay

Using Bruce's method (a bit higher poly) and playing with This Script I generated these.

Fun with curves1.jpg
Fun with curves2.jpg
Fun with curves3.jpg

GreenToaster

%(#000080)[Thanks all! I was able to figure out what I call "bubble shaping" where the sphere is squished, cut, & so forth (see my "bubble" car on or near the first page of this thread) but thanks very much modelhead for sharing that with everyone - a great techinque.

--||-- --||-- --||-- --||-- --||--

ely862me, that's really nice you posted those images and included some explanation. I've never modeled anything before using that technique although today I tried without much success.

@unknownuser said:

There is no doubt that stiching a model together is most accurate but not many of us have that kind of time luxury.
Yes, this looks like a time consuming approach - I'm used to other tools, but I'm not an expert with the cool looking stuff: surfaces! I've been using Pro/E for years and my surfacing capabilities aren't well developed. I'm looking forward to getting this technique down.

@unknownuser said:

u must make the wires after that fit them of cource u must have in mind the desifn of the car else u can t do a car, right?
I'm not very confident I can figure out how to "see" the model first - your words are very true and I believe some people have a natural ability to do this sort of thing where some do not. I clearly am in the latter category. I can "chop & chisel" flat surfaces all day - easy - but creating those beautiful smooth amorphic surfaces - wow, very impressive. Your images and words are very helpful & encouraging. I'm going to try again with something simple later tonight.

--||-- --||-- --||-- --||-- --||--

Boofredlay, that's a very nice script but I'm not sure how I could use it yet - thanks for posting it and showing the very nice examples.

Happy Sketching,

Brad]

boofredlay

Brad, the script is excellent for creating a thickness of an odd shape. Look at the solid one of the two shapes. This could prove very useful in making many car components FWIW.
Cheers.

GreenToaster

Boofredlay, thanks, I'll play with it.

Here is my first "real" attempt at stitching (is that what I'm doing?).

I can see how this is going to be lots of fun - a few questions:

[1] --> Does it look like I may be on the right track?

[2, 3, & 4] --> I have SketchUp Pro - doesn't it have high quality rendering built in? How do I take my very rough hood and make it "nice" and smooth? Do I just add more triangles?

Thanks,

Brad

bw_stitchy_hood_01.skp

GreenToaster

. . . 2nd attempt . . . just playin' around, nothing serious - this has some interesting possibilities for sure.

I wanted to take a circular surface and blend it quickly into two conics . . . I have lots to learn . . . but it's fun.

ely862me

i know and i agree that my tehnique takes time but look what i can do with it,sincerly i can t imagine to make cars helped by spheres or else of cource if u play a lot with it u can do nice things platforma +roti6.jpg platforma +roti7.jpg
u ll see soon this car in warehouse i must finish the interior,front and rear lights and some little things

ely862me

this is not finished but i couldn rezist to not take a picture

Concept car E016 1.jpg

GreenToaster

@unknownuser said:

I think your work is outstanding.
I agree 100% - very inspirational, artistic, and very cool!!!

I'd be very happy to be at your level of modeling & creativity - so, I'm going to press on and learn how.

Thanks ely862me!!!

GreenToaster

Here's a quick attempt at this technique - there is much to learn, like what is smoothing - when should it be used - why can't I see my surface edges anymore?

AND - I just discovered arcs are dimension driven so it's easy to change them quickly!!! Wow, that's a nice feature.

Thanks

Gaieus

Brad,

Until you start "handstitching" an arc (and thus ruining its curve entity), you can always hover over its middle endpoitn and modify its bulge. So just quickly draw the arc in the direction you desire and you can play with its bulging later (often you cannot pull it up enough because of some disturbing inferencing).

GreenToaster

Thank you Gaieus - great to know that, very helpful.

Here's a file (attached) where I'm trying some more new things. I could see with 3 or maybe 400 hours of doing this, I could begin to understand it well. :rolleyes:

Happy Sketching,

Brad

bw_car_0481.skp

ely862me

well done,i see u going in a good direction

GreenToaster

Thanks - coming from you that's very encouraging!

Here's a hood for a car I was working on - again, just trying to master the simple stuff. I couldn't resist creating a quick scoop.

I've also been quickly reminded that making use of layers is very helpful as well as keeping a copy of the pre-smoothed groups of surfaces by using components - I can't figure out how to change surfaces after smoothing is done otherwise.

I'm having trouble moving endpoints of surfaces - when I grab one, the red/green/blue axes don't lock . . . very puzzling . . . so I end up grabbing what I want to stretch, punch, or move and copy it over, create some construction geometry, make the change, then move it back - there's gotta be a better way.

Thanks,

Brad

Gaieus

Brad,

You can always turn on hidden geometry (View menu) and work with your softened/hidden lines as with "normal" ones.

Also when I'm moving endpoints, after clicking on them (but before moving), the axis lock with the arrow keys alwas work.

remus

very nice, i especially like the little 'e' badge.

greentoaster, youve come so far! i really must try and learn some of the things your doing here, maybe then i could start making models that are closer to the quaity of yours.

ely862me

the e badge is coming from my name elisei(elisha-us language,eliseo-spanish language)

solo

Ely that’s an awesome model.

However, as great as your model is and to some extent very relevant to the topic and all you have jacked many threads with your images. Please start a new thread with your fantastic looking cars and maybe an explanation as to how you achieved them.
As just posting images in this thread which is an evolutionary portfolio almost of GT's work kind of kills it.

ely862me

again i make a misstake

GreenToaster

This technique opens up a whole new world . . . somewhat time consuming - figuring it out as I go, never really done this before - even though I'm trying to avoid it, some of the surfaces get complicated quickly.

ely862me

a typ for u, i usually work with a half,only when i make some principal wires i doble it, i draw the lines and after i remove it again, u reduce the work on half,but if i look carefuly i see that u did this already , another type:u make the arches then divide them in how many segments do u want(more segments=more polys=more accurate=more time spent on a car),after dividing clear a segment and replace it with a line(do this with all segments)