OFFICEBLOK - Prefab office pod
-
Looking good. Have you thought of using a shower base type roof setup for collecting rainwater? It would of course depend on where the install was to be located of course.
-
Your models and presentation are always top-notch! Good work. I hope this project suceeds for you. Can these typically be installed without permits or planning approval(or maybe an electrical permit)in Aus. cities?
-
I love the style of your models (and I don't need to see the text to recocnize them as your work
-
@mike amos said:
Looking good. Have you thought of using a shower base type roof setup for collecting rainwater? It would of course depend on where the install was to be located of course.
Thanks as always Mike! Mate the roof is to be done akin to a shower base, as a one piece vacuum molded insert, roof water collection though wont likely be installed as it's such a small volume of runoff that could be collected.
Here is a shot of the proposed insert, the form was proposed as being able to rotate through 180deg to drain either to the front left or rear right so if install near the boundary, drainage isn't directed toward the neighbour. After install the tub / wall meeting at the top is capped with an aluminium channel.
-
@pbacot said:
Your models and presentation are always top-notch! Good work. I hope this project suceeds for you. Can these typically be installed without permits or planning approval(or maybe an electrical permit)in Aus. cities?
To you too mate again thanks as always!
In some states here it may be installed without planning approval and in others with just the minimum as complying development. Part of the challenge is ensuring it is within a $20k budget so as to not require a building permit, warranty insurance, and that it can be installed by a tradesman without a builder's license. An electrical permit isn't required but MUST be connected by a licensed electrician.
-
@cotty said:
I love the style of your models (and I don't need to see the text to recocnize them as your work
Thanks mate!!! As always I reckon cleanliness in next to godliness!
-
Cool project, great presentation! Prefabricated, modular homes have always fascinated me. I wonder why they're not more prevalent. You'd think people would prefer housing that didn't lead to significant indebtedness and without that burden, allowed them to build over time as their family or needs grow. Perhaps it's just inconvenient, or a red-tape-hindered kind of thing?
-
Sorry Richard I failed to get across the point as usual. The runoff would be logical and I did not mean to suggest you had not thought of it, as usual your projects are extremely well thought out. The point I failed to make was that if there was a method of having a small amount of residual water in that area, it could be useful to reduce the temperature inside the unit by cooling air at ceiling height. It would need to have some sort of lip on the drain side to keep a low level of water in place.
-
Richard, I'm finally living back in Sydney, let me know if you need any local assistance.
-
@mike amos said:
to keep a low level of water in place.
Not a good idea Mike, perfect incubation for mosquito larvae. In any case one would assume high spec insulation everywhere.
-
It's a fair cop, I should have thought of that point at least.
-
Wow Richard
Always in awe at how you manage to translate simple ideas into straightforward, clean, appealing concept while still being able to keep them ..... well so damned simple.
Cudo's -
You are really a master. I like your clean renderings.
-
@mike amos said:
Sorry Richard I failed to get across the point as usual. The runoff would be logical and I did not mean to suggest you had not thought of it, as usual your projects are extremely well thought out. The point I failed to make was that if there was a method of having a small amount of residual water in that area, it could be useful to reduce the temperature inside the unit by cooling air at ceiling height. It would need to have some sort of lip on the drain side to keep a low level of water in place.
Got ya! Although I agree with Baz about the Mozzie issue, and my own concerns about getting water away quickly so as to reduce any longer term issues, there is something there to consider about natural cooling!!! Although the space is small, add a body and a few electrical devices and the space could heat up! Considering some passive way to cool through the use of collected water is worthy of some thought!
Thanks mate!
-
@box said:
Richard, I'm finally living back in Sydney, let me know if you need any local assistance.
Very cool mate! At the least BEER sounds in order!
-
@baz said:
@mike amos said:
to keep a low level of water in place.
Not a good idea Mike, perfect incubation for mosquito larvae. In any case one would assume high spec insulation everywhere.
I'm not sure Mike's ideal is all that bad, certainly something to consider though mozzies are a huge issue.
Baz you're right, there is to be 100mm EPS insulation to the walls, 200mm to the floor and roof. Certainly the floor / roof insulation may seem massive overkill but more about achieving dimensions to simplify the build and create desired proportions. The roof thinkness is to reduce the draw depth of the plastic roof tub so the medium doesn't thin out too much on molding.
The overall structural build makes use of simple sandwich panel (cold store panel) as it's quick to assemble, just pop riveted together. The lining and cladding is then simply glued on for a fixing free finish.
The sliding door is proposed as double glazed with venetian blind in the cavity.
-
@gubermensch said:
Cool project, great presentation! Prefabricated, modular homes have always fascinated me. I wonder why they're not more prevalent. You'd think people would prefer housing that didn't lead to significant indebtedness and without that burden, allowed them to build over time as their family or needs grow. Perhaps it's just inconvenient, or a red-tape-hindered kind of thing?
Mate we are on the same page there, I love prefab as a method. For the most though it seems the final build / delivery and install price (here at least) tends to be higher than site built projects. I may well be missing the obvious but I cant see why! Except for the delivery, install and maybe the overhead on the factory, EVERYTHING else seems to be in favor.
Mind you, HYBRID is where I think progress is to be made!
-
@dale said:
Wow Richard
Always in awe at how you manage to translate simple ideas into straightforward, clean, appealing concept while still being able to keep them ..... well so damned simple.
Cudo'sThanks Dale! Mate the nice thing with this project, it itself is so simple it almost forces simplicity. Would be hard to make it anything else!
-
-
Very cool. Great idea!
Advertisement