[Plugin] Stair Maker

utiler

@tig said:

@utiler said:

The single most important thing currently missing is I think the 'nosing' - tread 'overlaps', required in all stairs...

True... Although for quick modelling purposes a basic stair would suffice unless of course you are doing Construction Docs.

rv1974

@tig said:

@rv1974 said:

There must be ability to set up the net gap between railing posts .
But that's a 'balustrade' tool not a stair tool ?
The 4"/100mm sphere gap rule will then apply too...

This plug-in generates some kind of primitive railing&posts system doesn't it?
My local safety regulations demand <= 10cm net gap between posts so getting it automatically (not through additional plugins) would be really great.

sdmitch

Yes, the railing and post system is premitive but I never intended it to be more and my intentions have not changed.

utiler

@utiler said:

Ok, the last post was sent at 2am this morning on my iPad so I didn't have the option to run the plugin....

Sam, I wasn't aware you weren't in the industry so here's a quick glossary of terms which I expect is pretty universal.

I've chosen to make an example of the U-shape in-situ stair as it covers most terms.
[attachment=0:263t8gtv]Stairmaker.png[/attachment:263t8gtv]

My crude attempt at a Dialogue Box

Stair Width: 2600
Stair Height: 3900
Flight 1 Width: 1200
Flight 2 Width: 1200
Tread Depth: 275
Total No. or Risers: 24
Riser Height: 162.5 [I expect this is a system variable that changes as No. of Riser input is changed. This gives the user a visual guide as to their final stair ratio...]
No. risers to Landing: 12 [this locates the landing in the overall flight...]
Rail Height: 900
Rail Offset: 50

Sam, Any chance of looking into this I posted a while back...?

Many thanks, Andrew

derei

Please explain each input element, for who has no specialized terms knowledge
For example, what is Risers2Landing? or Gap Run2Run, Step Depth, Riser Height,Tread Depth and so on...
Thank you very much.

sdmitch

@unknownuser said:

Please explain each input element, for who has no specialized terms knowledge
For example, what is Risers2Landing? or Gap Run2Run, Step Depth, Riser Height,Tread Depth and so on...
Thank you very much.

Risers2Landing is the number of steps or risers going up to the landing of a U-shape stair.
Gap Run2Run is the space between the sets of stairs in a U-shape stair.
Step Depth is the front to back dimension of each step.
Riser Height is the vertical distance between each step.
Tread Depth is the thickness of the individual steps.

utiler

@utiler said:

@utiler said:

Ok, the last post was sent at 2am this morning on my iPad so I didn't have the option to run the plugin....

Sam, I wasn't aware you weren't in the industry so here's a quick glossary of terms which I expect is pretty universal.

I've chosen to make an example of the U-shape in-situ stair as it covers most terms.
[attachment=0:2etuiebv]Stairmaker.png[/attachment:2etuiebv]

My crude attempt at a Dialogue Box

Stair Width: 2600
Stair Height: 3900
Flight 1 Width: 1200
Flight 2 Width: 1200
Tread Depth: 275
Total No. or Risers: 24
Riser Height: 162.5 [I expect this is a system variable that changes as No. of Riser input is changed. This gives the user a visual guide as to their final stair ratio...]
No. risers to Landing: 12 [this locates the landing in the overall flight...]
Rail Height: 900
Rail Offset: 50

Sam, Any chance of looking into this I posted a while back...?

Many thanks, Andrew

Sam?

sdmitch

U, it is a little more than just changing the labels in the inputbox. Allowing a variable number of steps to/from the landing of U-shape stairs would require extensive re-write.

utiler

Thanks Sam, thought it was worth asking anyway....

AlainBo

Hello,
It could be interesting to be able to create L shape also.

Regards,
Alain

sdmitch

@unknownuser said:

Hello,
It could be interesting to be able to create L shape also.

Regards,
Alain

That might be a simple add. I'll give it some thought.

sdmitch

@unknownuser said:

Hello,
It could be interesting to be able to create L shape also.

Regards,
Alain

Alain, The L shape option has been added.

guanjin

未命名.jpg
sdmitch：Hello
What is the above parameters, why no change。
L-shaped and U-shaped running very slow。
The previous version，Normal。
The ladder can not be changed to a pipe or a rectangle, the only line.

AlainBo

Cool,
thanks sdmitch

charly2008

Hi sdmitch,

thanks for the extension.

Charly

luhrzeznik

Hi, I'm having a bit of trouble here!

I used the plugin once and it worked fine. But when I tried to use it again, it doesn't get past the Stair Type. I click my option and the screen just disappear and then nothing. Do you have any idea why that could be happening?

sdmitch

@luhrzeznik said:

Hi, I'm having a bit of trouble here!

I used the plugin once and it worked fine. But when I tried to use it again, it doesn't get past the Stair Type. I click my option and the screen just disappear and then nothing. Do you have any idea why that could be happening?

I assume this happens regardless of which stair option is selected?

Locate and delete the Stair Maker.txt file and try the plugin again.

What Units system are you using, 1.00 or 1,00?

lexje

Thanks for the tool!
I've been looking around for stair plug ins but could not find many. (1001bit but it does not contain L-shaped or quarter-turn stairs)
TIG,would you mind posting some links to the plug-ins you referenced?

Thanks a lot!

Erwin

TIG

A simple SCF Search http://sketchucation.com/forums/searchgoogle.php?keyword=stair+plugin returns 430 hits!

This thread is ~1 year old...
There are new stair tools on the block...
Look at...
http://www.youtube.com/watch?v=PMWwlmsmNAs
http://sketchucation.com/forums/viewtopic.php?p=509033#p509033 [links off to http://cabmaker32.com/?s=stair%26amp;submit=Go ]

hajasulthan

its not working in sketchup 2013