JSON in Ruby

[OricAtmos]

@myhand said:

Hi OricAtmos, I tried to get this to work but keep getting errors when trying to include the library:
[...]

How did you install the library?

I think it might have to do with the library search paths or something. I'll get back to you tomorrow with the details.

[Dan Rathbun]

@myhand said:

I tried to get this to work but keep getting errors when trying to include the library:
require 'yajl'
If you do not specify some kind of filepath, then the file must be in one of the directories listed in the $LOAD_PATH array.

Ruby's require() first checks to see if the argument resolves to an absolute path, and if so, checks to see if the file exists, and if true, attempts to load it.

Secondly, it checks to see if the argument is a relative path (incl. no path at all,) and if so, require() then iterates the $LOAD_PATH array prepending the base paths in front of your relative path. If it finds match, it loads the file, IF such a path is NOT ALREADY present in the $LOADED_FEATURES (aka $") array.

What does the following LoadError exception message tell you?
Error: #<LoadError: c:/temp/yajl.rb:1:inrequire': no such file to load -- yajl/yajl>`

Answer: That "c:/temp/yajl.rb" on line 1, is calling require("yajl/yajl"), but no file named "yajl.rb", "yalj.so ", "yalj.dll", etc., can be found, because it's a relative path, and there is no path containing a "yalj" SUB-directory in the $LOAD_PATH array, containing a file (of any valid extension that require() can load,) named "yalj".

IF you simply copied the "yalj" directory into the SketchUp "plugins" directory, and typed require("yajl/yajl") in the SketchUp Ruby Console, it would be found. (Not to say that it would work, because it itself may have other file dependencies, such as Standard Ruby library files, which requires you to have a full Ruby installation, AND push it's library paths into the $LOAD_PATH array.)

Understanding require() and load(), and how they use (or not,) the $LOAD_PATH (aka $:) and $LOADED_FEATURES (aka $") arrays, is Ruby 101 week 1.

Click on the link in my signature, and follow the advice to collect docs. And just below my Newbie Guide, I posted the old "Pick-Axe" book. Required reading.

[Dan Rathbun]

@myhand said:

I can also not call them as you would call a static method, i.e. JSON.escape().

OK Example:

Assume your "plugins" dir, has sub-dir "myhand", which has a sub-dir "lib", which contains a file "json.rb"

I recommend having your nested dir names match your nested namespaces, so you can remember the relative paths when it comes time to type a require expression.

module MyHand
  module Lib
    module JSON # mixin module

      def escape(value)
        ret = ""
        value.split("").each do |c|
          if (/["\\\/\b\f\n\r\t]/.match( c ) )
            ret << '\\' << c
          else
            ret << c
          end
        end
        return ret
      end # escape()

    end # module JSON
  end # module Lib
end # module MyHand

.. and in a plugin:

module Author
  module NiftyPlugin
 
    # make sure the lib file is loaded
    require("myhand/lib/json.rb")
 
    # mix in the library module, as a nested module;
    module JSON
      #
      # bring in public mixin instance methods
      # as public module methods in THIS module;
      #
      extend(MyHand;;Lib;;JSON)
      #
    end # module
 
    # use it calling a module method;
    str = JSON.escape("\tHello World!\n")

    puts(str)
 
  end # module NiftyPlugin
end # module Author

OR ... using module_function() like the Math module does ...

module MyHand
  module Lib
    module JSON # mixin module

      module_function()

      def escape(value)
        ret = ""
        value.split("").each do |c|
          if (/["\\\/\b\f\n\r\t]/.match( c ) )
            ret << '\\' << c
          else
            ret << c
          end
        end
        return ret
      end # escape()

    end # module JSON
  end # module Lib
end # module MyHand

.. and in a plugin:

module Author
  module NiftyPlugin
 
    # make sure the lib file is loaded
    require("myhand/lib/json.rb")
 
    # Use a library module function, via a
    # local constant aliasing the library;
    JSON = MyHand;;Lib;;JSON
 
    # use it calling a module method;
    str = JSON.escape("\tHello World!\n")

    puts(str)
 
  end # module NiftyPlugin
end # module Author

[OricAtmos]

Dan already explained more than I could have. He also wrote a nice ruby script to include additional folders in $LOAD_PATH. Read all about it here: http://sketchucation.com/forums/viewtopic.php?f=180&t=29412&p=342471&hilit=!loadpaths

[Myhand]

@dan rathbun said:

@myhand said:

I tried to get this to work but keep getting errors when trying to include the library:
require 'yajl'
If you do not specify some kind of filepath, then the file must be in one of the directories listed in the $LOAD_PATH array.

Ruby's require() first checks to see if the argument resolves to an absolute path, and if so, checks to see if the file exists, and if true, attempts to load it.

Secondly, it checks to see if the argument is a relative path (incl. no path at all,) and if so, require() then iterates the $LOAD_PATH array prepending the base paths in front of your relative path. If it finds match, it loads the file, IF such a path is NOT ALREADY present in the $LOADED_FEATURES (aka $") array.

Thank you Dan for the detailed explanation and links to starter guides. I will review and try this when I get home tonight. One interesting point in this case though is that the only file called yajl.* is c:/temp/yajl.rb which is also the file that contains the

require 'yajl/yajl'

line. There is a a subdirectory called yajl, but no files named "yajl.rb", "yajl.so " or "yajl.dll" anywhere else in the yajl library distribution... So cannot see how adding the "c:/temp" path to $LOAD_PATH will find the file as it does not appear to exist.

Will let you know.

[OricAtmos]

@myhand said:

There is a a subdirectory called yajl, but no files named "yajl.rb", "yajl.so " or "yajl.dll" anywhere else in the yajl library distribution... So cannot see how adding the "c:/temp" path to $LOAD_PATH will find the file as it does not appear to exist.

Sounds like you don't have the complete library.
This is a list of files I have in my Yajl folder:

[...]\rubylibs\yajl.rb
[...]\rubylibs\yajl\1.8\yajl.so
[...]\rubylibs\yajl\1.9\yajl.so
[...]\rubylibs\yajl\bzip2.rb
[...]\rubylibs\yajl\bzip2\stream_reader.rb
[...]\rubylibs\yajl\bzip2\stream_writer.rb
[...]\rubylibs\yajl\deflate.rb
[...]\rubylibs\yajl\deflate\stream_reader.rb
[...]\rubylibs\yajl\deflate\stream_writer.rb
[...]\rubylibs\yajl\gzip.rb
[...]\rubylibs\yajl\gzip\stream_reader.rb
[...]\rubylibs\yajl\gzip\stream_writer.rb
[...]\rubylibs\yajl\http_stream.rb
[...]\rubylibs\yajl\json_gem.rb
[...]\rubylibs\yajl\json_gem\encoding.rb
[...]\rubylibs\yajl\json_gem\parsing.rb
[...]\rubylibs\yajl\version.rb
[...]\rubylibs\yajl\yajl.rb

[Myhand]

@oricatmos said:

@myhand said:

There is a a subdirectory called yajl, but no files named "yajl.rb", "yajl.so " or "yajl.dll" anywhere else in the yajl library distribution... So cannot see how adding the "c:/temp" path to $LOAD_PATH will find the file as it does not appear to exist.

Sounds like you don't have the complete library.
This is a list of files I have in my Yajl folder:

Yes OricAtmos, I think you are right. I took my version from here

https://rubygems.org/gems/yajl-ruby .

As I cannot install the gem in Sketchup I unzipped the gem file and took the files from the lib directory. This gives me the following files which is clearly not complete.

C;\Temp\lib\yajl
C;\Temp\lib\yajl.rb
C;\Temp\lib\yajl\bzip2
C;\Temp\lib\yajl\bzip2.rb
C;\Temp\lib\yajl\deflate
C;\Temp\lib\yajl\deflate.rb
C;\Temp\lib\yajl\gzip
C;\Temp\lib\yajl\gzip.rb
C;\Temp\lib\yajl\http_stream.rb
C;\Temp\lib\yajl\json_gem
C;\Temp\lib\yajl\json_gem.rb
C;\Temp\lib\yajl\version.rb
C;\Temp\lib\yajl\bzip2\stream_reader.rb
C;\Temp\lib\yajl\bzip2\stream_writer.rb
C;\Temp\lib\yajl\deflate\stream_reader.rb
C;\Temp\lib\yajl\deflate\stream_writer.rb
C;\Temp\lib\yajl\gzip\stream_reader.rb
C;\Temp\lib\yajl\gzip\stream_writer.rb
C;\Temp\lib\yajl\json_gem\encoding.rb
C;\Temp\lib\yajl\json_gem\parsing.rb

Where did you get the library from?

Cheers,

myhand

[OricAtmos]

@myhand said:

Where did you get the library from?

I don't remember where I got the Windows binaries from. Perhaps I still have a bookmark in my web browser at work, but right now I'm at home and can't have a look. But since I have access to our project repository from home I can offer you this:

Dropbox - 404

(dl.dropbox.com)

[Myhand]

@oricatmos said:

@myhand said:

Where did you get the library from?

I don't remember where I got the Windows binaries from. Perhaps I still have a bookmark in my web browser at work, but right now I'm at home and can't have a look. But since I have access to our project repository from home I can offer you this:

Dropbox - 404

(dl.dropbox.com)

Thanks OricAtmos! Will give it a try.

[OricAtmos]

@myhand said:

Thanks OricAtmos! Will give it a try.

Did you get it to work? Unfortunately I've been unsuccessful in finding out where I got it from.

[Myhand]

@oricatmos said:

@myhand said:

Thanks OricAtmos! Will give it a try.

Did you get it to work? Unfortunately I've been unsuccessful in finding out where I got it from.

Sorry, I got a bit tied up with trying to solve the MAC bug in my Material_Maintenance Plugin.

Thank you, I have now got it to not throw an error, but my test code does not seem to serialise objects, so will need to read the library docs to see what I am doing wrong

` require 'yajl'

h = {"key1", "val1", "key2", "val2"};

obj = ["Hello", "world", "I am here", ["where", "what", "are", "you"]];

class TestClass

@name = nil;
@adress = nil;
@list = nil;

def initialize(p1, p2)
@name, @adress = p1, p2;
@list = [1,2,3.01,-4.35];
end

end

t = TestClass.new("Richo", "37 Scotland Rd, Buckhurst Hill, IG9 5NP");

obj = ["Hello", "world", t, "I am here", ["where", "what", "are", "you"]];

str = Yajl::Encoder.encode(obj);

puts str;`

Produces

["Hello","world","#<TestClass;0x144d9cc0>","I am here",["where","what","are","you"]]

Instead of the

["Hello","world",{"@list";[1,2,3.01,-4.35],"@name";"Richo","@adress";"37 Scotland Rd, Buckhurst Hill, IG9 5NP"},"I am here",["where","what","are","you"]]

I would expect and which is what my simple JSON Serializer produces.

[Myhand]

Hi OricAtmos,

I got it to work now thank you. It seems that it can only serialise Hash and Array objects though, which is good enough for most cases I guess. Given the non-trivial install and given the fact that it uses binary libraries, I suspect it will not work on a MAC either without libraries built for that.

I will therefore continue with my simple JSON encoder, which while probably much slower, is simple to install and should work out of the box on a MAC as it is pure RUBY. It can also encode standard objects which can be useful.

Thanks for your help in getting this working though. I will keep it in mind if I ever have to do large data sets.

[OricAtmos]

All right, I wasn't aware Yajl isn't able to work with arbitrary objects. I was only using it to encode/decode hashes with simple values and arrays.

[Myhand]

Hi guys,

I need some help. I have run into problems creating a json encoding where a string contains a single quote char. e.g. "Betty's pie shop"

somehow ruby creates a new char which replaces the y and the '. You can see this by executing the following command:

puts "Betty's pie shop"

and I get

Bett
s pie shops pie shop

if you past this into an editor that supports UTF8 you see that a special char has been added into where the y and ' was. Also note that the last bit of the string is now duplicated.

I can escape it, but this is then not a valid json string as json does not allow you to escape the ' char.

[driven]

May be your encoding... only fails with single quotes here

> puts "Betty's pie shop"
Betty's pie shop
nil
> p "Betty's pie shop"
"Betty's pie shop"
nil
> print "Betty's pie shop\n"
Betty's pie shop
nil
> print 'Betty's pie shop\n'
Error; #<SyntaxError; (eval); compile error
(eval); parse error, unexpected tIDENTIFIER, expecting $
print 'Betty's pie shop\n'
              ^>
(eval)

john

[Dan Rathbun]

@myhand said:

... somehow ruby creates a new char which replaces the y and the '. You can see this by executing the following command:
puts "Betty's pie shop"
and I get:
%(#008000)[>> Bett
s pie shops pie shop]

At the SketchUp Ruby Console:
` puts "Betty's pie shop"
>> Betty's pie shop

puts "Betty's pie shop".inspect()
>> "Betty's pie shop"

puts "Betty's pie shop".inspect().inspect()
>> ""Betty's pie shop""`

[Dan Rathbun]

s = %q(Dan's friggin' advice, "Hey, use Ruby's % lowercase 'q' interpretive delimiter. It's a great help when your bleepin' strings have "'" and '"' characters in them!")

%Q and % is a double-quoted string. You can choose any 2 delimeters you want.

name = %$MyHand$

str = %q{I want some quotes right "HERE"! Let's go.}

[Myhand]

@driven said:

May be your encoding... only fails with single quotes here
john

Thought so too initially. But I got the same results by typing straight into the Sketchup Ruby console... Can you set encoding at the Sketchup level?

[Myhand]

@dan rathbun said:

At the SketchUp Ruby Console:
` puts "Betty's pie shop"
>> Betty's pie shop

puts "Betty's pie shop".inspect()
>> "Betty's pie shop"

puts "Betty's pie shop".inspect().inspect()
>> ""Betty's pie shop""`

This works for me today on my work PC. So must be something specific with my Sketchup installation/version at home. Both are Version 8 out of the box installations on Windows. The one that corrupts the "'" char is the Pro addition, while the one at work is the Standard edition.

[Myhand]

@dan rathbun said:

s = %q(Dan's friggin' advice, "Hey, use Ruby's % lowercase 'q' interpretive delimiter. It's a great help when your bleepin' strings have "'" and '"' characters in them!")

%Q and % is a double-quoted string. You can choose any 2 delimeters you want.

name = %$MyHand$

str = %q{I want some quotes right "HERE"! Let's go.}

Thank you Dan, I will give this a go tonight. As you might have guessed though the actual string I am having problems with (not the pie shop one ) is ComponentDefinition name field. Something like "Bath 6'x34"x54"". So I never actually input the string, I am just reading it. So I am not sure how I will use the above technique to step around the problem. Will have to give it some thought.